bulb replacement - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BLKMAJK · 08-06-2011, 04:52 PM

I am looking to change the interior dome lights to LED, but I do not know how to remove the bulb assembly, and also the rear marker lights. Anybody know how to do this? I have checked the manual and I can't seem to find it anywhere in there.

CamaroDreams07 · 08-06-2011, 04:59 PM

When you order your interior Oracle LEDs they come with instructions for removing the assembly. It's very easy, two plastic pieces of trim just need to be popped off.

I'm not sure on the rear markers, somebody will chime in on that.

BLKMAJK · 08-11-2011, 10:36 PM

Thanks for the info....all done and installed, looks great!!

As for the rear bumper lights...I do believe, after a bit of research, I will have to remove the bumper for this one. Wow, just to replace the bulbs, that seems like a big job!!

The Stig · 08-11-2011, 10:48 PM

Are you talking about the reverse lights? Yea you need to remove the bumper, it's super easy though. Its not just changing a bulb though, it's the whole housing.

BLKMAJK · 08-12-2011, 10:22 PM

Ok, I will have to check that out. Thanks for the tidbit. With just four inches of clearance, I have to find myself a special low profile jack, that will help me do the job. Thanks again!!

"RUBBER SIDE DOWN"

08-06-2011, 04:52 PM	#1
BLKMAJK Drives: 2010 RS/SS LS3 575HP SUPERCHARGED Join Date: Jul 2011 Location: EDMONTON, ALBERTA Posts: 16 View My Garage	bulb replacement I am looking to change the interior dome lights to LED, but I do not know how to remove the bulb assembly, and also the rear marker lights. Anybody know how to do this? I have checked the manual and I can't seem to find it anywhere in there.

08-06-2011, 04:59 PM	#2
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	When you order your interior Oracle LEDs they come with instructions for removing the assembly. It's very easy, two plastic pieces of trim just need to be popped off. I'm not sure on the rear markers, somebody will chime in on that. __________________ [B]

08-11-2011, 10:48 PM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Are you talking about the reverse lights? Yea you need to remove the bumper, it's super easy though. Its not just changing a bulb though, it's the whole housing. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - 2010-2011 Camaro D1S HID bulb replacement instructions and photos	GearHeadPeter	Cosmetics and Lighting Modification Discussions	56	02-26-2021 08:16 AM
HID bulb replacement...	2010IBMSS	Cosmetics and Lighting Modification Discussions	19	02-08-2011 08:00 AM
HID Bulb Replacement	copper3000	Cosmetics and Lighting Modification Discussions	2	02-01-2011 03:40 PM
Cant get a replacement bulb socketed ???	jtzako	5th Gen Camaro SS LS LT General Discussions	6	01-22-2011 03:02 PM
daytime running lamps HID bulb replacement	topgun1	Cosmetics and Lighting Modification Discussions	5	03-13-2010 11:59 PM

08-11-2011, 10:36 PM	#3
BLKMAJK Drives: 2010 RS/SS LS3 575HP SUPERCHARGED Join Date: Jul 2011 Location: EDMONTON, ALBERTA Posts: 16 View My Garage	Thanks for the info....all done and installed, looks great!! As for the rear bumper lights...I do believe, after a bit of research, I will have to remove the bumper for this one. Wow, just to replace the bulbs, that seems like a big job!!

08-12-2011, 10:22 PM	#5
BLKMAJK Drives: 2010 RS/SS LS3 575HP SUPERCHARGED Join Date: Jul 2011 Location: EDMONTON, ALBERTA Posts: 16 View My Garage	Ok, I will have to check that out. Thanks for the tidbit. With just four inches of clearance, I have to find myself a special low profile jack, that will help me do the job. Thanks again!! "RUBBER SIDE DOWN"