Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results - Page 14 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ChadG · 02-22-2012, 08:38 PM

Quote:

Originally Posted by Mach

Here's my VR intake with the 25mm Mace. A taller insulator....

http://www.camaro5.com/forums/showpo...&postcount=491

Yeah that's crazy, it's almost twice what the gap is on mine (the key fob is a tight fit for me). Do you have any before pictures to compare it to or can you comment on what that gap looked like beforehand?

Mach · 02-22-2012, 08:40 PM

Quote:

Originally Posted by ChadG

Yeah that's crazy, it's almost twice what the gap is on mine (the key fob is a tight fit for me). Do you have any before pictures to compare it to or can you comment on what that gap looked like beforehand?

Well yeah since the back was raised an inch the front came wayyyy down because I tilted the horn a few degrees. Before it was just under a key fob thickness.

chozn4service · 02-22-2012, 08:49 PM

Yea, when Mike did the testing on my car it seemed to allow more of an opening or gap to allow air flow to the VR and I'm not complaining at all. I had just a key fob and under WOT, it would close up. Mike said he saw where the VR could slide off the TB and he had a plan to take care of that and give the black VR housing more grip to stay in place. I got on it hard and heavy when I drove it back home and all held solid and true.

rydahog · 02-22-2012, 09:31 PM

Anyone installed this ICEolator and what are your real world..? results..thanks..cost to have it installed? thanks ryd..

OOLIE · 02-22-2012, 10:05 PM

I am very happy so far I would get in contact with Tracy as it is a short drive for you rydahog.

Nytemare · 02-23-2012, 12:31 AM

The install is very simple to do yourself if you wanted to save a few bucks!
edit: Wish I wasn't so impatient.. Had to get it on! Unfortunately I have everything at home (I'm at college right now..) to paint my IM so guess I'm going to hafta take it off to do it again -.- lol O well.. the 3 hour drive home will be more fun!

JustFresh · 02-23-2012, 01:19 AM

Quote:

Originally Posted by Nytemare

The install is very simple to do yourself if you wanted to save a few bucks!
edit: Wish I wasn't so impatient.. Had to get it on! Unfortunately I have everything at home (I'm at college right now..) to paint my IM so guess I'm going to hafta take it off to do it again -.- lol O well.. the 3 hour drive home will be more fun!

Wish you were at college at College of Charleston so I could check out your gains!

TJ91 · 02-23-2012, 01:20 AM

Quote:

Originally Posted by 67 GTO

I'll be installing mine tomorrow and will take a before and after pic.

I don't expect any appreciable change in the gap.

Can you do some before and after 0-60 times pleaseeeeee

TJ91 · 02-23-2012, 01:21 AM

Havnt gotten mine yet. Hope it's not stuck at customs

Rickmaff · 02-23-2012, 02:27 AM

Either the bourbon kicked in or you forgot the pic

Toasty · 02-23-2012, 02:29 AM

Quote:

Originally Posted by Rickmaff

Either the bourbon kicked in or you forgot the pic

the bourbon? Thought it was the VTAAAAK

ROFL

Darkone · 02-23-2012, 04:39 AM

Will the Ice-olator work with the Roto-fab intake?

nyrfan · 02-23-2012, 07:39 AM

Quote:

Originally Posted by Darkone

Will the Ice-olator work with the Roto-fab intake?

I think the only CAI currently giving (small) issues is the Vararam, all other CAI's should be a-ok.

mhog · 02-23-2012, 07:48 AM

Quote:

Originally Posted by nyrfan

I think the only CAI currently giving (small) issues is he Vararam, all other CAI's should be a-ok.

No issues with the Vararam at all. It fits so good with it that it makes you check and recheck the install.

02-22-2012, 08:49 PM	#185
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Yea, when Mike did the testing on my car it seemed to allow more of an opening or gap to allow air flow to the VR and I'm not complaining at all. I had just a key fob and under WOT, it would close up. Mike said he saw where the VR could slide off the TB and he had a plan to take care of that and give the black VR housing more grip to stay in place. I got on it hard and heavy when I drove it back home and all held solid and true. __________________ Never grow up, it's a trap!

02-22-2012, 10:05 PM	#187
OOLIE Drives: 2011 LS Join Date: Oct 2010 Location: FL Posts: 1,643	I am very happy so far I would get in contact with Tracy as it is a short drive for you rydahog. __________________

02-23-2012, 12:31 AM	#188
Nytemare Quick 6 Drives: 2010 camaro ls v6 Join Date: May 2010 Location: Myrtle Beach SC/ Greenville NC Posts: 233 View My Garage	The install is very simple to do yourself if you wanted to save a few bucks! edit: Wish I wasn't so impatient.. Had to get it on! Unfortunately I have everything at home (I'm at college right now..) to paint my IM so guess I'm going to hafta take it off to do it again -.- lol O well.. the 3 hour drive home will be more fun! __________________

02-23-2012, 01:21 AM	#191
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	Havnt gotten mine yet. Hope it's not stuck at customs __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

02-23-2012, 02:27 AM	#192
Rickmaff Drives: 2011 1LT M6 Join Date: Dec 2011 Location: Fountain Hills, AZ Posts: 50	Either the bourbon kicked in or you forgot the pic __________________

02-22-2012, 09:31 PM	#186
rydahog Drives: camaro ss Join Date: Jul 2010 Location: usa Posts: 2,166 View My Garage	Anyone installed this ICEolator and what are your real world..? results..thanks..cost to have it installed? thanks ryd..

02-23-2012, 04:39 AM	#194
Darkone Drives: 2011 Camaro LT/RS SIM Join Date: May 2010 Location: Oman Posts: 167	Will the Ice-olator work with the Roto-fab intake? __________________ Performance: Trifecta tune, Roto-fab CAI, MRT V2, Resonated X-Pipe, Vmax Iceolator, Vmax Ported TB Suspension: Pedders full cradle bushings & radius rod inserts, BMR swaybars & endlinks, LSR trailing arms, Pfadt endlink brace

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 intake manifold	usa1camaro1969	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	33	09-01-2011 10:25 PM