What Did You Do To Your Camaro Today?

[davesnever]

Originally Posted by MjrStfy

Got the stock wheels powdered coated white.

Yeah definitely very clean looking, I like it but have you thought about the brake dust dilema? Hope they have a good clear clear coat on them.

[Slowboychrisss]

Anybody selling a zl1 pump? Looking to buy one shoot me message if you have one for sale thanks !

[ZZZTOPZZZ]

@ $214.00 at Summit Racing. Just installed one 2 weeks ago.

[Woo]

(Yesterday) went to summit racing to pick up a cold air intake and a set of spark plug wires. I ran into a 04’ Cobra SVT boasting 825hp and didn’t find out the hard way if it was true or not hahaha..... I have yet to do an install of parts, looking to do some airbrush artwork on my CAI....

[Stormcloak]

Originally Posted by davesnever

Yeah definitely very clean looking, I like it but have you thought about the brake dust dilema? Hope they have a good clear clear coat on them.

I was gonna say, they do look great, have fun keeping them clean I had a much older GSXR750 bike that had white wheels, it was a losing battle

[Syncamaro1234]

Getting ready to wash,and polish rims.

[SSEssence]

Painted my calipers with G2 red caliper paint and applied heat resistant brembo vinyls, came out like factory, super happy with the results!

[John_C]

Got everything together and installed.

Still tuning it...

Trans shifts are off...

Cold starts take a lot of cranking.

2010 Cyber Gray Camaro 2SS RS A6
Circle D Specialties GM 278mm 6L80 3200-3400 RPM 2B Torque Converter
Cold Air Inductions CAI
JRE CAI Scoop + RotoFab Washer Bottle Relocation Kit
Kooks Ceramic Coated Signature Series 1-3/4 to 1-7/8 Stepped Headers Part #22502300
Kooks full 3in exhaust with race cats Part #22505201 (Currently with Off Raod Catless Pipes)
Trick Flow GenX 255's #TFS-3261T004-C01 (With Polished PAC .660's and Ti-Retainers)
Texas Speed VVT 3.2 cam kit & DOD Delete (with Comp Cams VCT Limiter)
Texas Speed 1.72:1 Ratio LS3 Steel Roller Rocker Arm Set w/ Roller Tip
AEM X-Series OBDII Wideband Gauges (PN#30-0333)
Fuel Injector Clinic ID850 Injectors
GM Camaro ZL1 High Output Fuel Pump
DSX Tuning Flex Fuel Kit + E85
NGK Iridium IX spark plugs
HP Tuners VCM Suite

Cliffs: 8.2 @ 91 on street tire letting off and trans short shifting....





Only 2nd pass ever on this setup. On street tire in stock size, so i didn't expect to to be able to run to the full potential of this setup.

Eased in to the throttle, spun, let off, and the auto short shifted to 2nd and a bit early to 3rd. It shifted so weird it ran like a short shifted manual on this run. Run before was more wheelspin and bounced off rev limiter on upshifts.... I need sticky tires bad.

[ZZZTOPZZZ]

Were did you source the paint and decals?

[SSEssence]

Originally Posted by ZZZTOPZZZ

Were did you source the paint and decals?

g2 caliper paint kit is from amazon, decals are all over ebay, just search heat resistant camaro brembo decals.

[orange devil]

Originally Posted by SSEssence

Painted my calipers with G2 red caliper paint and applied heat resistant brembo vinyls, came out like factory, super happy with the results!

came out looking awesome bro !! Did you use a high temp clear after you applied the decals for Extra Protection?

[SSEssence]

Originally Posted by Elvis66

came out looking awesome bro !! Did you use a high temp clear after you applied the decals for Extra Protection?

Thanks brother, G2 recommends not putting a clear coat on their paint as it needs time to fully cure. Also clear coat will yellow over the years with the heat. I figure the decals only cost 7 bucks, if they get messed up, I will order another pair

[SSEssence]

Originally Posted by John_C

Got everything together and installed.

Still tuning it...

Trans shifts are off...

Cold starts take a lot of cranking.

Shes looking and sounding mean, nice work!

[etlreams]

Got new shoes today. After getting new wheels last week, I didn't like the way the factory tire sizes (245 front, 275 rear) setup on them. So went larger tires. 275 front, 305 rear. Nitto 555 G2. Love the look and so far the ride quality is great!