06-23-2018, 10:53 AM | #1 |
|
Caused by tire install
Like the title says,does this look like improper tire install was the cause of this?
__________________
Cai intake and a few other mods😎
|
06-23-2018, 11:23 AM | #2 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
ummm..did you just get new tires installed? was this there before hand? did you do a complete walk around check before leavin?
lots of q's...good luck. peace
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
06-23-2018, 11:26 AM | #3 |
|
Yes, im at the tire shop as we speak, already had them take picture, never noticed it before and i just recently did a diff swap so looked them over pretty well
__________________
Cai intake and a few other mods😎
|
06-23-2018, 11:26 AM | #4 |
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 944
|
Looks like it considering below the "DOT" text on the tire the mark goes to the inner rim and under the tire yet the outside of the wheel/lip and the tire above the mark is unscathed.
Did you just get new tires?
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
06-23-2018, 11:28 AM | #5 |
|
Yes at the tire shop as we speak getting an alignment as well on the car
__________________
Cai intake and a few other mods😎
|
06-23-2018, 12:24 PM | #6 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
Looks to be from install. Under lip of tire, ask to see the tire that was removed.
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 |
06-23-2018, 12:59 PM | #7 |
|
The shop took pictures and sent them to the main guy, he said a different shop(franchise shop) had an issue like this and they sent the rim off to be recoated, sucks ill be without the car for 3 to 4 days if they do it but if they do atleast there stepping up and taking care of the issue
__________________
Cai intake and a few other mods😎
|
06-23-2018, 06:49 PM | #8 |
Drives: 2015 Camaro 1SS 6M Join Date: Dec 2017
Location: The Freeway
Posts: 238
|
The teflon/plastic guide slipped off and the tire iron got your wheel. This looks like a simple accident, nothing major. It happens and it does suck...
I worked at a tire shop for several years of my youth. If it went halfway around the wheel, then they just didn't use the plastic guide piece. Atleast they didn't pound wheel weights onto the lip of the only set of your wheels known to exist in the US. I had that happen once on some mini lite style wheels on the 240Z, I was very upset.
__________________
|
06-23-2018, 06:54 PM | #9 |
Drives: 2015 Camaro 1SS 6M Join Date: Dec 2017
Location: The Freeway
Posts: 238
|
To be clear, I see no evidence of an "improper" tire install. That would rip the bead and have no effect on your wheel. The guide just fell off and the mechanic didn't have the balls to communicate that an issue occured.
__________________
|
06-24-2018, 06:24 PM | #10 |
|
Thank you for all of your feed back, they sent it to there big guy so waiting on there decision, the manager said more than likely they will send it to be resurfaced which will take 3 to 4 days
__________________
Cai intake and a few other mods😎
|
06-24-2018, 09:06 PM | #11 |
Account Suspended
Drives: Camaro and Sierra Join Date: Jul 2012
Location: Virginia
Posts: 795
|
If that’s the case no issue. Had mine done to correct a few dings from wife and came back same as new
|
06-24-2018, 11:02 PM | #12 |
|
, I was still at the place when I posted this, I was making sure I had different perspectives in case they wanted to argue, which the manager was pretty cool so hoping that expierence continues
__________________
Cai intake and a few other mods😎
|
06-25-2018, 10:24 AM | #13 |
Drives: 2014 1LE Join Date: Oct 2013
Location: Northern Virginia
Posts: 478
|
|
08-06-2018, 05:52 PM | #14 |
|
So just an update on this, So a update on this issue,
Glenwood springs big o decided they would repair the rim, took about two week for that, then on July 13th I dropped off my rim and they said it should be done by the time I got home from vacation on the 1st, well now they are saying the paint (gun metal) is being difficult to match and is taking more time, is it me or is this a lot of bs, is this the way all big o shop are now or just mine?
__________________
Cai intake and a few other mods😎
|
|
|
|
|