Hawk brake pads - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Junior · 07-03-2018, 07:02 AM

I too run the Hawk Ceramic. They surely aren't for track use, but bite enough for street use, while keeping dust and squeaks down. These are the sets I purchased:

Front: Hawk Performance HB453Z.585
Rear: Hawk Performance HB194Z.570

DT10 · 07-03-2018, 06:04 PM

I’m a fan of hawk pads. I run the street pads on my Vette. When it’s time to replace the pads on the Camaro I’ll buy the hawk street pads again. Great performance and very low dust. I think they are reasonably priced as well.

Bball · 07-10-2018, 09:27 AM

im also done with the oembrake dust, lookin to go with hawk, did you guys turn your rotors when you swapped? or just pad slap them? i have 8k miles

DT10 · 07-11-2018, 06:33 PM

Quote:

Originally Posted by Bball

im also done with the oembrake dust, lookin to go with hawk, did you guys turn your rotors when you swapped? or just pad slap them? i have 8k miles

I did rotors and pads at the same time.

VR Baron · 07-11-2018, 06:42 PM

For street and autocross I use Hawk 5.0. Per Jdp’s suggestion.last set Hawk Hps, and those are just a bit less in ability. All you need. No roller skates

jdpeezy91 · 08-04-2018, 05:59 AM

Quote:

Originally Posted by VR Baron

For street and autocross I use Hawk 5.0. Per Jdp’s suggestion.last set Hawk Hps, and those are just a bit less in ability. All you need. No roller skates

Thanks!

jdpeezy91 · 08-15-2018, 01:58 PM

Do you have the parts number the ones im looking at Part#: HB726B.582 the diagram looks like they have skates on them not sure if its wrong set or just diagram picture is wrong

Quote:

Originally Posted by VR Baron

For street and autocross I use Hawk 5.0. Per Jdp’s suggestion.last set Hawk Hps, and those are just a bit less in ability. All you need. No roller skates

BowlingSS · 02-11-2019, 02:33 PM

I have been using the Hawks HPS pads on my 4th and 5th Gen. No dust. Much better than the stock one.

Bill

07-03-2018, 07:02 AM	#15
Junior Drives: 2014 2SS/RS A6 AGM Join Date: Apr 2010 Location: Maryland Posts: 526	I too run the Hawk Ceramic. They surely aren't for track use, but bite enough for street use, while keeping dust and squeaks down. These are the sets I purchased: Front: Hawk Performance HB453Z.585 Rear: Hawk Performance HB194Z.570

07-03-2018, 06:04 PM	#16
DT10 Drives: 2015 2SS/RS Join Date: Feb 2018 Location: Poughkeepsie Posts: 109	I’m a fan of hawk pads. I run the street pads on my Vette. When it’s time to replace the pads on the Camaro I’ll buy the hawk street pads again. Great performance and very low dust. I think they are reasonably priced as well.

07-10-2018, 09:27 AM	#17
Bball Drives: 2015 ss w/rs pkge Join Date: Nov 2015 Location: Gln,az Posts: 11	im also done with the oembrake dust, lookin to go with hawk, did you guys turn your rotors when you swapped? or just pad slap them? i have 8k miles

07-11-2018, 06:42 PM	#19
VR Baron SoCal Camaro5 Race Team Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010 Location: SO CAL Posts: 14,367	For street and autocross I use Hawk 5.0. Per Jdp’s suggestion.last set Hawk Hps, and those are just a bit less in ability. All you need. No roller skates

02-11-2019, 02:33 PM	#22
BowlingSS Camaro Owner Since 1987 Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006 Location: Lawrenceville, GA Posts: 2,185	I have been using the Hawks HPS pads on my 4th and 5th Gen. No dust. Much better than the stock one. Bill