Lingenfelter Performance Engineering Customers - Page 54 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1320junkie · 10-13-2009, 07:57 PM

Quote:

Originally Posted by Windy City

Asked Lingy to blow my Super Duty, no such luck!

Scotty is the MAN!

LOL..yes he is

Quote:

Originally Posted by 570hp-lpe

LOL

I'm gonna tell Scotty to put a padlock on the hood to keep you out! J/K

Adding a turbo for extra pulling power?

LOL i want to add more torque and just a minor lift and tires

Windy City · 10-13-2009, 10:41 PM

Got to do a few hours of reading on the plane to and from Vegas. That's extremely unusual for me as if I am sitting in one place for long, it's behind the wheel.
Picked up a "Hot Rod" magazine, November and Hennessey smoozed there way into it with an article on there 2010 Camaro builds.
Quote, "Finally the big cheese in Hennessey's Camaro stable is the LS9 powered HPE700. At the time of our road test, it was still a work in progress, and electrical gremlins precluded fully giving it a proper beat down."
I guess it wouldn't make for good marketing saying it wasn't being tuned by them!
There is another article in there about how Hot Rod has been modifying a 5th Gen with bolt on's and using old school tricks to beat the times down. In their "mod car" they are using a Lingenfelter LNC-002 launch and timing controller. With a nitrous kit, Hot Rod states 514 HP at the wheels.

Speed74SS · 10-14-2009, 03:12 PM

Where did you guys buy the upgraded half shafts from?? I need to get them sometime this winter. After seeing the pictures of the stockers, I will definately be upgrading.

1320junkie · 10-14-2009, 03:27 PM

Quote:

Originally Posted by Speed74SS

Where did you guys buy the upgraded half shafts from?? I need to get them sometime this winter. After seeing the pictures of the stockers, I will definately be upgrading.

$2,030 installed from LPE. But you can get them from the Drive Shaft Shop also.

600hp-lpe · 10-14-2009, 03:32 PM

Quote:

Originally Posted by Speed74SS

Where did you guys buy the upgraded half shafts from?? I need to get them sometime this winter. After seeing the pictures of the stockers, I will definately be upgrading.

$1850.00 to purchase them from LPE.. I already asked Tim.

Speed74SS · 10-14-2009, 05:09 PM

Quote:

Originally Posted by 570hp-lpe

$1850.00 to purchase them from LPE.. I already asked Tim.

Sweet - I will just give them a call and get them from LPE then. I will have them installed here when I get the rest of my Pedders bushings installed. Looking forward to getting more stuff installed - even though I won't be driving it much this time of year.

What do you think for the DR's on the stock rims? Should I go with the 275's or 305's?? I don't really plan on using them off the drag strip but you never know.

tones2SS · 10-14-2009, 06:09 PM

Quote:

Originally Posted by 570hp-lpe

LOL

you do know both choices suck in the snow..

Why not get a pickup and drive it around? Can haul the trailer and keep you out of trouble at the same time. you wont mod THAT would you? LOL

Quote:

Originally Posted by 1320junkie

Scotty found me a 3500HD crew cab duramax diesel..and yep its getting modded

I saw that coming!!! lol

Windy City · 10-15-2009, 06:50 PM

Brothers, we need to welcome a new "prospect" to our Brotherhood! At the moment he has just been lurking But I have a feeling we will be hearing from Big Bad John in Atlanta soon.

He is indeed another 650 Lingy Brother, and to add to his accolades, an automatic man!

I welcome him with open arms to the Brotherhood!

Now, back to our regularly scheduled program!

600hp-lpe · 10-15-2009, 07:52 PM

Some Cool news...

Read the Pedders thread.. they posted in a few threads. They are posting some numbers - along with Pic's of some pretty cute babes. The Pedders Camaro on the Bridgestone RE-11's pulled 1.38 G's around Gingerman on a 54 deg. day.. Awesome handling #'s. 7 seconds faster than the stock camaro.

The babes aren't too bad either.

Windy, you better get permission before viewing... LOL

RS-SS2 · 10-15-2009, 10:32 PM

Her heart is beating loudly and her lungs are taking in large volumes of air and soon I will be experiencing the power of the LPE brotherhood.

Windy City · 10-15-2009, 10:35 PM

SWEET RS, I am happy for you!

Won't be long you will be reunited with your long lost love!

RS-SS2 · 10-15-2009, 11:00 PM

Thanks Windy. There is no doubt all of us here lost our loved ones for a while but I am anticipating that she has become everything I thought she could be!!!

Have you put any more miles on your beast since your return?

Windy City · 10-15-2009, 11:05 PM

Quote:

Originally Posted by RS-SS2

Thanks Windy. There is no doubt all of us here lost our loved ones for a while but I am anticipating that she has become everything I thought she could be!!!

Have you put any more miles on your beast since your return?

No, unfortunately

Only have an hour or 2 awake at home a day. Also it's been raining here all week.
Hopefully some fun is in the forecast this weekend!

Did talk to a little birdie today about a certain brothers N/A motor! Sounds interesting!

1320junkie · 10-15-2009, 11:13 PM

Quote:

Originally Posted by Windy City

No, unfortunately

Only have an hour or 2 awake at home a day. Also it's been raining here all week.
Hopefully some fun is in the forecast this weekend!

Did talk to a little birdie today about a certain brothers N/A motor! Sounds interesting!

Who did you talk to upthere? lol..

10-13-2009, 10:41 PM	#744
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	November Hot Rod Got to do a few hours of reading on the plane to and from Vegas. That's extremely unusual for me as if I am sitting in one place for long, it's behind the wheel. Picked up a "Hot Rod" magazine, November and Hennessey smoozed there way into it with an article on there 2010 Camaro builds. Quote, "Finally the big cheese in Hennessey's Camaro stable is the LS9 powered HPE700. At the time of our road test, it was still a work in progress, and electrical gremlins precluded fully giving it a proper beat down." I guess it wouldn't make for good marketing saying it wasn't being tuned by them! There is another article in there about how Hot Rod has been modifying a 5th Gen with bolt on's and using old school tricks to beat the times down. In their "mod car" they are using a Lingenfelter LNC-002 launch and timing controller. With a nitrous kit, Hot Rod states 514 HP at the wheels. __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-14-2009, 03:12 PM	#745
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Where did you guys buy the upgraded half shafts from?? I need to get them sometime this winter. After seeing the pictures of the stockers, I will definately be upgrading. __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

10-15-2009, 06:50 PM	#750
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	Brothers, we need to welcome a new "prospect" to our Brotherhood! At the moment he has just been lurking But I have a feeling we will be hearing from Big Bad John in Atlanta soon. He is indeed another 650 Lingy Brother, and to add to his accolades, an automatic man! I welcome him with open arms to the Brotherhood! Now, back to our regularly scheduled program! __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-15-2009, 10:32 PM	#752
RS-SS2 Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009 Location: Albuquerque Posts: 377 View My Garage	The beast is alive and well!!!!! Her heart is beating loudly and her lungs are taking in large volumes of air and soon I will be experiencing the power of the LPE brotherhood. Attached Images __________________ Beware of the LPE Brotherhood

10-15-2009, 10:35 PM	#753
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	SWEET RS, I am happy for you! Won't be long you will be reunited with your long lost love! __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-15-2009, 07:52 PM	#751
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Some Cool news... Read the Pedders thread.. they posted in a few threads. They are posting some numbers - along with Pic's of some pretty cute babes. The Pedders Camaro on the Bridgestone RE-11's pulled 1.38 G's around Gingerman on a 54 deg. day.. Awesome handling #'s. 7 seconds faster than the stock camaro. The babes aren't too bad either. Windy, you better get permission before viewing... LOL

10-15-2009, 11:00 PM	#754
RS-SS2 Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009 Location: Albuquerque Posts: 377 View My Garage	Thanks Windy. There is no doubt all of us here lost our loved ones for a while but I am anticipating that she has become everything I thought she could be!!! Have you put any more miles on your beast since your return? __________________ Beware of the LPE Brotherhood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM