![]() |
|
|
#1 |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Season Points Award
I was lucky enough to snag 2nd place in season points in the Super Shifter class at the local track. After a 7 race series I was tied in first place with the 8 time track champion. We had a run-off race to determine the winner, and as luck would have it, my DS axle decided that was the time to snap. It was still a lot of fun and I couldn't have lost to a nicer guy.
![]() I keep the broken axle stub on my desk at work to remind me what could have been. I'm not saying I would have won, but it would have been nice to run it out the entire 1320 ft. ![]() I'll be back next year to challenge for the championship!!
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA Last edited by zlathim; 11-25-2019 at 02:22 PM. |
|
|
|
|
|
#2 |
![]() Drives: 2010 Camaro 2SS/RS ABM 6M Join Date: Jul 2017
Location: Kansas
Posts: 617
|
Nice, congrats man! Any luck on cracking into the 11 second barrier?
I am curious, which DSS axles were you running? I am looking to maybe upgrade those this winter, and want something that will hold todays and future power
__________________
2010 ABM 2SS/RS LS3 6 Speed -- Rotofab CAI | Speed Engineering 1 7/8" Longtubes w/ cat Delete | Magnaflow competition catback | TSP 231/246 cam| TSP/PAC .660" Spring Kit | TSP CNC Ported Heads | Bo White PTB | GPI Ported/RM Intake | 3.91's | BC Catch Can | MGW Shifter | BMR 1" Drop Springs | BMR Trailing arms/Toe Rods/Rear UCA Bushings | Pegasus Subframe Mounts
|
|
|
|
|
|
#3 | |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Quote:
Sorry about the confusion. I broke my DS (driver's side) axle, but they are just stock axles in the car, not aftermarket. I replaced with stock because I'd rather break one of those than the diff.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,634
|
Nice work, Z!
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
|
|
|
|
|
#5 | |
![]() Drives: 2010 Camaro 2SS/RS ABM 6M Join Date: Jul 2017
Location: Kansas
Posts: 617
|
Quote:
![]() And my bad, my brain read DSS axle not DS axle. Have heard of others doing the same thing, running stock ones as an intentional weak link. I am hopeful that between the billet caps I have now, and adding an LPW cover at some point, that a factory rear will hold the power I am looking to throw at it. Especially since the suspension is stiffened up a bit too. Wondering if the tru track upgrade would be worth it now as well
__________________
2010 ABM 2SS/RS LS3 6 Speed -- Rotofab CAI | Speed Engineering 1 7/8" Longtubes w/ cat Delete | Magnaflow competition catback | TSP 231/246 cam| TSP/PAC .660" Spring Kit | TSP CNC Ported Heads | Bo White PTB | GPI Ported/RM Intake | 3.91's | BC Catch Can | MGW Shifter | BMR 1" Drop Springs | BMR Trailing arms/Toe Rods/Rear UCA Bushings | Pegasus Subframe Mounts
|
|
|
|
|
|
|
#6 | |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Thanks, Chris!!!
Quote:
I've heard good things about the billet caps. Good luck with the LPW cover, i hear they are taking quite some time to deliver these days. I highly recommend the true trac. I've seen a couple 5th gens at the track spinning one tire after the clutches wear out. No such problem with the true trac plus it makes differential oil changes a little bit easier since you don't need to worry about friction modifiers.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Nice job Z! Hey you gave it a good run and now you got something fun to look forward to next season. Sounds like it was a blast doing a point series.
__________________
Car mods: never enough!
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Congrats on making the finals.
I don't think your diff will have any issues with stronger axles. I'm in an L99 with 3.91's, True trac, and DSS 1000 hp axles. I broke a stock one too, passenger side, should have put DSS in when I did the True Trac and gear. My car does 1.4X 60' times (125 shot) when it dead hooks, and no issues with the diff or axles whatsoever. I actually picked up over a 10th in the 1/8th mile after putting the DSS axles on. The only downside to them is the car rides stiffer on the road. If you haven't done weight reduction yet, that will get your car in the 11's without spending any cash. Take the passenger and rear seats out, remove the trunk carpet and battery cover.
__________________
Roto-Fab intake, SW 1 7/8" LT w/hi flow cats, Flowmaster outlaw exhaust, UDP, 160* stat, Circle D 3200, Moroso catch can, TCI line lock, Zex Nitrous 125 shot, 3.91 gear, Eaton True-trac, DSS 1000hp axles. |
|
|
|
|
|
#9 | |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Quote:
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
|
|
|
|
|
#11 |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
I know, but I've got a bunch of Dr bills coming in so I'm going to hold off until I get all that paid for. It will probably have to wait until tax time.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() Drives: Never just fly under the radar Join Date: Jul 2015
Location: Kansas
Posts: 1,531
|
To cool Z!
__________________
1-8-4-3-6-5-7-2
Old Skool |
|
|
|
|
|
#13 |
![]() Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
|
|
|
|
|
|
![]() |
|
|