What Did You Do To Your Camaro Today? - Page 1665 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Coleroad · 04-11-2020, 06:51 PM

Took Journey on a camaro club cruise in the Garden Of the Gods today. Spectacular views of e mountains, and warm enough to put the top down for it.

Mr2Hard2See · 04-11-2020, 06:53 PM

15RS2NV · 04-12-2020, 03:38 PM

Did a paint correction on my '15 RS. Got rid of about 70% of the swirl marks. Looks so much better now. Did it myself, I figured with all this down time I better get some stuff done on the car.

ADVMax · 04-13-2020, 02:37 PM

So out of boredom this weekend I decided that I wanted to see a little red peeking out from under the plastic engine cover.

From ugly to not ugly to peeking out.

InFiD3ViL · 04-13-2020, 02:56 PM

Quote:

Originally Posted by ADVMax

So out of boredom this weekend I decided that I wanted to see a little red peeking out from under the plastic engine cover.

From ugly to not ugly to peeking out.

Looks good man! I did the same with VHT Wrinkle Red paint. Just a little thing that helps clean things up a bit.

ADVMax · 04-13-2020, 02:59 PM

I wanted to go with the wrinkle but since I didn't have a heat gun and didn't want to put them in the kitchen oven I just went flat red.

Some years ago I had a bake-on gun finish in the kitchen oven thing that had more odor than I had led the misses to believe. Thus I have been banned from cooking Car, motorcycle, or gun parts in the kitchen oven.

InFiD3ViL · 04-13-2020, 03:17 PM

Quote:

Originally Posted by ADVMax

I wanted to go with the wrinkle but since I didn't have a heat gun and didn't want to put them in the kitchen oven I just went flat red.

Some years ago I had a bake-on gun finish in the kitchen oven thing that had more odor than I had led the misses to believe. Thus I have been banned from cooking Car, motorcycle, or gun parts in the kitchen oven.

I don't blame you. I got in big trouble for that one.

Coleroad · 04-13-2020, 03:27 PM

Did this instead of the premade bowtie inserts. Just wanted something different than everyone else.

Coleroad · 04-13-2020, 03:29 PM

Quote:

Originally Posted by ADVMax

So out of boredom this weekend I decided that I wanted to see a little red peeking out from under the plastic engine cover.

From ugly to not ugly to peeking out.

That project turned out great.

xstuntman · 04-13-2020, 07:33 PM

Quote:

Originally Posted by Coleroad

Did this instead of the premade bowtie inserts. Just wanted something different than everyone else.

You've peaked my interest.
Details?

Coleroad · 04-13-2020, 10:05 PM

Quote:

Originally Posted by xstuntman

You've peaked my interest.
Details?

I just bought this metal sign on ebay. Attached it with four stainless steel bolts with fender washers on the backside. I put a piece of butyl rubber on the backside of the bolts. Just in case it touches the hood. Then i knew it would not have any chance of damaging the hood in any way. I also ceramic coated both sides of it to help protect it.

xstuntman · 04-13-2020, 10:20 PM

Looks good, thanks.

2011SSCT · 04-14-2020, 08:22 PM

Installed a new spoiler and wicker bill.

Camaro2ss2010 · 04-15-2020, 08:35 PM

Dropped it off to get a cam and other go faster items installed.

04-11-2020, 06:51 PM	#23297
Coleroad Drives: 13 Camaro Join Date: Oct 2016 Location: Colorado Posts: 315	Took Journey on a camaro club cruise in the Garden Of the Gods today. Spectacular views of e mountains, and warm enough to put the top down for it. Attached Images

04-12-2020, 03:38 PM	#23299
15RS2NV Ponies are for girls Drives: 2015 RS LFX Red Hot A6 Join Date: Sep 2018 Location: Southern AZ Posts: 315 View My Garage	Did a paint correction on my '15 RS. Got rid of about 70% of the swirl marks. Looks so much better now. Did it myself, I figured with all this down time I better get some stuff done on the car. __________________ H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro

04-13-2020, 02:37 PM	#23300
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	So out of boredom this weekend I decided that I wanted to see a little red peeking out from under the plastic engine cover. From ugly to not ugly to peeking out. Attached Images

04-13-2020, 03:27 PM	#23304
Coleroad Drives: 13 Camaro Join Date: Oct 2016 Location: Colorado Posts: 315	Did this instead of the premade bowtie inserts. Just wanted something different than everyone else. Attached Images

04-13-2020, 10:20 PM	#23308
xstuntman Drives: 2012 Victory Red LFX Join Date: Dec 2012 Location: west central Texas Posts: 1,370	Looks good, thanks. __________________ '18 SS wheels, colored matched Heritage grille, actual driving lights, ZL1 strut tower brace, GM Performance billet aluminum fuel door, victory red rotors and calipers, 1/4 window American flags, splash guards, AEM dry panel air filter, Hot Wheels steering wheel and seat covers, Hot Wheels exterior emblems.

04-13-2020, 02:59 PM	#23302
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	I wanted to go with the wrinkle but since I didn't have a heat gun and didn't want to put them in the kitchen oven I just went flat red. Some years ago I had a bake-on gun finish in the kitchen oven thing that had more odor than I had led the misses to believe. Thus I have been banned from cooking Car, motorcycle, or gun parts in the kitchen oven.

04-14-2020, 08:22 PM	#23309
2011SSCT Drives: 2011 Camaro 2SS/RS Join Date: Feb 2020 Location: Milford, CT Posts: 42	Installed a new spoiler and wicker bill. __________________ L99 to LS3, Whipple 2.9 Blower with 3.750 pulley, ID1050x injectors, JRE Rough Idle Blower Cam, BTR Bronze Bushing Trunnion Kit , JRE/BTR .660 Springs, BTR Pushrods, Melling High Volume Oil Pump, ZL1 Fuel Pump, JRE FPCM, JMS BAP, JRE 90MM Ported Throttle Body Circle D 3200 Stall Converter, Ceramic Coated Kooks Long Tubes, Kooks Full Exhaust with Hi Flow Cats, Cold Air Inductions Intake With JRE Scoop, JRE Built Rear Differential with Billet Caps, 3:91 Gears and Eaton TrueTrac Posi, JRE Dyno Tune, Moroso Wires, Moroso Catch Can, Factory Reproductions Gloss Black ZL1 Wheels. 659WHP/566TQ

04-15-2020, 08:35 PM	#23310
Camaro2ss2010 Drives: 2010 Camaro 2SSRS M6 Join Date: Jan 2019 Location: Alabama Posts: 1,287	Dropped it off to get a cam and other go faster items installed. __________________ ECS supercharger, Texas speed stage 3 boosted cam, Johnson 2110 race style lifters, ported throttle body, long tube headers, aeromotive fuel pump, fic injectors, ATI super damper, Corsa Extreme exhaust, elite engineering catch can and many other things.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM