Lingenfelter Performance Engineering Customers - Page 89 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Windy City · 11-04-2009, 08:59 AM

Quote:

Originally Posted by 570hp-lpe

Quote:
Originally Posted by 1320junkie
lol..no worries I will return the favor in April...lmao..and its a he...lmao

Hey you two (Windy and Junkie)...
You're not gonna go rent cars from Hertz and do the "days of thunder"
drive on the beach, smashing into each other at the C5 Fest are ya? ROFL

Let me know.. I want to watch! LOL

Oh Junkie............this sounds like a good idea to me!

1320junkie · 11-04-2009, 09:53 AM

Quote:

Originally Posted by Windy City

Oh Junkie............this sounds like a good idea to me!

lol I will rip up a rental no problem...lol

Man I really wish GM would jump oout there with somethinig like this for a limited run

http://www.motorauthority.com/blog/1...ra-jet-mustang

Windy City · 11-04-2009, 11:28 AM

Quote:

Originally Posted by 1320junkie

lol I will rip up a rental no problem...lol

Man I really wish GM would jump oout there with somethinig like this for a limited run

http://www.motorauthority.com/blog/1...ra-jet-mustang

They did, called a ZR-1!
A friend of mine told me about these a few weeks ago. He said they are only selling them on a reciept, you can't title or liscense them.
Very limited and hard to get too!

600hp-lpe · 11-04-2009, 05:53 PM

Quote:

Originally Posted by 1320junkie

lol I will rip up a rental no problem...lol

Man I really wish GM would jump oout there with somethinig like this for a limited run

http://www.motorauthority.com/blog/1...ra-jet-mustang

I heard about that mustang.. it's 800hp set up for drag racing. I don't think it's street legal. It would be cool if GM had one as well..

It was built by Carrol Shelby and Don "the snake" Prudohmme. Will be a very valuable car as they didn't make more than 25? of them. Price was just shy of 100K.

1320junkie · 11-04-2009, 06:11 PM

Quote:

Originally Posted by Windy City

They did, called a ZR-1!
A friend of mine told me about these a few weeks ago. He said they are only selling them on a reciept, you can't title or liscense them.
Very limited and hard to get too!

Thats fine by me..lol..if GM made a strip only car

Quote:

Originally Posted by 570hp-lpe

I heard about that mustang.. it's 800hp set up for drag racing. I don't think it's street legal. It would be cool if GM had one as well..

It was built by Carrol Shelby and Don "the snake" Prudohmme. Will be a very valuable car as they didn't make more than 25? of them. Price was just shy of 100K.

Yep I think they only made 50 of them

Speed74SS · 11-04-2009, 08:30 PM

Man - I saw this sweet cars today!!! I have a few pictures and will post them a little later. I am sure you have seen most of them from Tribone's threads but I have a few of the Specter Works Corvette and some other good pics. I really liked the LPE ground effects and new badging. The TA was bad asz as well!! They look so much better in person.

I am resting my feet for a little bit here and then off to Yolies for a little dinner. I also picked up a lot of "playing cards" that the locals on the strip were handing out - lol

1320junkie · 11-04-2009, 08:31 PM

Quote:

Originally Posted by Speed74SS

Man - I saw this sweet cars today!!! I have a few pictures and will post them a little later. I am sure you have seen most of them from Tribone's threads but I have a few of the Specter Works Corvette and some other good pics. I really liked the LPE ground effects and new badging. The TA was bad asz as well!! They look so much better in person.

I am resting my feet for a little bit here and then off to Yolies for a little dinner. I also picked up a lot of "playing cards" that the locals on the strip were handing out - lol

lol its funny how they make them make that popping noise huh..lol

mws444 · 11-04-2009, 08:37 PM

Quote:

Originally Posted by 1320junkie

lol I will rip up a rental no problem...lol

Man I really wish GM would jump oout there with somethinig like this for a limited run

http://www.motorauthority.com/blog/1...ra-jet-mustang

Like Shelby, I heard LPE has a car for you Junkie.

It would be cool to have LPE and Chevy team up for a limited run. 650 hp and a full warranty who could ask for more?

2010 BADSS · 11-04-2009, 08:38 PM

:party0048::party0048:Yippee!! I got my baseline dyno back today and the transformation has begun.

My build so far will be:

LPE 650 BHP package
Dual disc clutch set
Borla catback exhaust-S type
HD rear axle half shafts
ADM Performance boost gauge
MTI Motorsports shifter

Still considering:
Wheel/Tire combination
GFX
6.70 rear gear

RS is currently on route to SEMA and has instructions to bring back as much info as possible

Speed, don't distract him too much.

mws444 · 11-04-2009, 08:43 PM

Quote:

Originally Posted by Speed74SS

Man - I saw this sweet cars today!!! I have a few pictures and will post them a little later. I am sure you have seen most of them from Tribone's threads but I have a few of the Specter Works Corvette and some other good pics. I really liked the LPE ground effects and new badging. The TA was bad asz as well!! They look so much better in person.

I am resting my feet for a little bit here and then off to Yolies for a little dinner. I also picked up a lot of "playing cards" that the locals on the strip were handing out - lol

How is the crowd out there? I am hoping for a good turnout to SEMA this year. How about the rest of Vegas are people gambling? I was out there in FEB and things were really slow.

Find those SEMA goodies for our cars and snap some pics. Any gears out there?

1320junkie · 11-04-2009, 08:53 PM

can't wait to see that Specter Works Corvette is it nice in person

Speed74SS · 11-04-2009, 08:59 PM

Quote:

Originally Posted by 2010 BADSS

:party0048::party0048:Yippee!! I got my baseline dyno back today and th transformation has begun.

My build so far will be:

LPE 650 BHP
Dual disc clutch set
Borla catback exhaust-S type
HD rear axle half shafts
ADM Performance boost gauge
MTI Motorsports shifter

Still considering:
Wheel/Tire combination
GFX
6.70 rear gear

RS is currently on route to SEMA and has instructions to bring back as much info as possible

Speed, don't distract him too much.

There is nothing distracting out here.....hmmm....lots of cars though. I'll do my best. Oh yeah and your car is going to be awesome!!!

mws444 · 11-04-2009, 09:27 PM

Quote:

Originally Posted by 2010 BADSS

:party0048::party0048:Yippee!! I got my baseline dyno back today and th transformation has begun.

My build so far will be:

LPE 650 BHP
Dual disc clutch set
Borla catback exhaust-S type
HD rear axle half shafts
ADM Performance boost gauge
MTI Motorsports shifter

Still considering:
Wheel/Tire combination
GFX
6.70 rear gear

RS is currently on route to SEMA and has instructions to bring back as much info as possible

Speed, don't distract him too much.

That is good news!!!!! Here is to your new and improved Maro

2010 BADSS · 11-04-2009, 09:50 PM

Thanks guys. Needless to say, I'm excited.

11-04-2009, 08:30 PM	#1238
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Man - I saw this sweet cars today!!! I have a few pictures and will post them a little later. I am sure you have seen most of them from Tribone's threads but I have a few of the Specter Works Corvette and some other good pics. I really liked the LPE ground effects and new badging. The TA was bad asz as well!! They look so much better in person. I am resting my feet for a little bit here and then off to Yolies for a little dinner. I also picked up a lot of "playing cards" that the locals on the strip were handing out - lol __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

11-04-2009, 08:38 PM	#1241
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	:party0048::party0048:Yippee!! I got my baseline dyno back today and the transformation has begun. My build so far will be: LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type HD rear axle half shafts ADM Performance boost gauge MTI Motorsports shifter Still considering: Wheel/Tire combination GFX 6.70 rear gear RS is currently on route to SEMA and has instructions to bring back as much info as possible Speed, don't distract him too much. Last edited by 2010 BADSS; 11-04-2009 at 09:48 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

11-04-2009, 08:53 PM	#1243
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	can't wait to see that Specter Works Corvette is it nice in person

11-04-2009, 09:50 PM	#1246
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	Thanks guys. Needless to say, I'm excited.