V6 to Z/28 Suspension Swap

[SummitWhite11]

Originally Posted by CamaroCracka

I run ZL1 springs on the vert with a 27/32 bar combo, so I can't really make recommendations based on experience. I can tell you your spring choice should work with your bar choice, i.e. not too much spring with big bars. The 1LEs ran a 27/28 combo with SS springs but realize most factory setups are designed with understeer to be more forgiving.

Here is a link to Justice Pete's The Book post. He has forgotten more about these cars than I will ever know.

https://www.camaro5.com/forums/showp...&postcount=485

My Camaro had the ZL1 springs on them when I purchased the vehicle from the previous owner. The Koni's and DSE 1.5" lowering springs made a positively huge difference in handling.