Flywheel Torque Specs? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

stangspanker · 02-03-2010, 01:37 PM

Does anyone know what the Torque specs on the flywheel to crank are? and also what the tq specs are on the bellhousing. I know they are the same as stock but what is stock?

WICKEDSS · 02-03-2010, 03:07 PM

Auxiliary Transmission Oil Cooler Quick Connect Fittings
--
--
--
25 N·m
18 lb ft

Auxiliary Transmission Oil Cooler Brace to Skid Bar Bolt
--
--
--
25 N·m
18 lb ft

Auxiliary Transmission Oil Cooler Bracket to Body Nuts
--
--
--
8 N·m
71 lb in

Auxiliary Transmission Oil Cooler to Bracket Mounting Bolts
--
--
--
22 N·m
16 lb ft

Case Extension to Case Assembly
16
6
M10x1.5x40
55 N·m
41 lb ft

Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly
310
6
M5x0.8x55
8 N·m
71 lb in

Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly
309
10
M5x0.8x45
8 N·m
71 lb in

Control Solenoid Valve Heat Sink to Valve Body
312
2
M5x0.8x53
8 N·m
71 lb in

Control Valve Upper Body Assembly to Control Valve Lower Body Assembly
301
12
M5x0.8x36
8 N·m
71 lb in

Control (with Body and Valve) Valve Assembly to Case Assembly
22
6
M5x0.8x73
8 N·m
71 lb in

Fluid Pan Assembly to Case Assembly (6L80)
30
18
M6x1.0x20
9 N·m
80 lb in

Fluid Pan Assembly to Case Assembly (6L50)
30
17
M6x1.0x20
9 N·m
80 lb in

Fluid Pump Cover Assembly to Torque Converter Housing
231
13
M6 1.0x40
11 N·m
97 lb in

Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly
302
2
M6x1.0x20
12 N·m
106 lb in

Line Pressure Test Hole Plug to Torque Converter Housing
202
1
1/8-27 NPTF
11 N·m
97 lb in

Manual Shaft Detent Assembly to Valve Body
23
1
M6x1.0x14.5
12 N·m
106 lb in

Prop Shaft Trans Flange to Output Shaft
39
1
M22x1.5x14
105 N·m
77 lb ft

Shift Control Assembly to Body Nuts
--
4
--
9 N·m
80 lb in

Shift Control Knob Screw
--
1
--
2 N·m
18 lb in

Shift Control Linkage to Manual Shift Shaft Nut (AWD)
--
1
--
20 N·m
15 lb ft

Shift Control Linkage to Manual Shift Shaft Nut (RWD)
--
1
--
15 N·m
11 lb ft

Shift Control Linkage to Shift Control Assembly Nut
--
1
--
9 N·m
80 lb in

Torque Converter Housing Assembly to Case Assembly (6L50)
3
8
M8x1.25x50
31 N·m
23 lb ft

Torque Converter Housing Assembly to Case Assembly (6L80)
3
9
M10x1.5x50
72 N·m
53 lb ft

Torque Converter to Flywheel Bolts
--
3
--
63 N·m
46 lb ft

Trans Oil Level Check Plug to Fluid Pan Assembly
31
1
M12x1.75
25 N·m
18 lb ft

Transmission Oil Cooler Pipe Clip to Oil Pan Nuts
--
--
--
10 N·m
89 lb in

Transmission Oil Cooler Pipe Clip to Torque Tube Bolts
--
--
--
12 N·m
106 lb in

Transmission Oil Cooler Pipes to Transmission Bolt
--
--
--
16 N·m
12 lb ft

Transmission to Engine Block Bolts
--
10
--
50 N·m
37 lb ft

Transmission Support Assembly to Body Bolts
--
4
--
60 N·m
44 lb ft

Transmission Support Assembly to Transmission Bolts - RWD
--
2
--
60 N·m
44 lb ft

Transmission Support Assembly to Transmission Bolts - AWD
--
2
--
110 N·m
81 lb ft

*Reference number refers to the component callout number in Disassembled Views

WICKEDSS · 02-03-2010, 03:11 PM

Clutch Housing Assembly to Transmission Case Bolts
48 N·m
36 lb ft

Clutch Housing Pump Plug
27 N·m
20 lb ft

Concentric Slave Cylinder Bolt
12 N·m
106 lb in

Coolant Temperature Sensor
39 N·m
29 lb ft

Cooler Line Return Fitting
18 N·m
13 lb ft

Cover Plate Bolts
20 N·m
15 lb ft

Extension Housing Plug
27 N·m
20 lb ft

Extension Housing to Transmission Case Bolts
48 N·m
36 lb ft

Gear Select/Skip Shift Solenoid
40 N·m
30 lb ft

Neutral Return Cam Spring Retaining Bolt
25 N·m
18 lb ft

Propshaft Transmission Yoke Nut
136 N·m
100 lb ft

Pump Outlet Cooler Fitting
17 N·m
13 lb ft

Reverse Idler Shaft Bracket Bolts
25 N·m
18 lb ft

Reverse Lockout Assembly Bolt
18 N·m
13 lb ft

Reverse Lockout Solenoid
40 N·m
30 lb ft

Shift Control Adapter Plate Bolt
18 N·m
13 lb ft

Shift Control Adapter Plate Nut
12 N·m
106 lb in

Shift Detent Assembly
40 N·m
30 lb ft

Shift Guide Plate Bolts
22 N·m
16 lb ft

Shift Lever Guide Bolts
27 N·m
20 lb ft

Shift Shaft Detent Plug
24 N·m
18 lb ft

Transmission Bolt
48 N·m
35 lb ft

Transmission Case Drain Plug
27 N·m
20 lb ft

Transmission Case Fill Plug
27 N·m
20 lb ft

Transmission Fluid Pump Outlet Pipe Fitting
18 N·m
13 lb ft

Transmission Fluid Temperature Sensor/Drain Plug
18 N·m
13 lb ft

Transmission Mount to Transmission Case Bolts
60 N·m
44 lb ft

Vehicle Speed Sensor (VSS) Bolt
11 N·m
96 lb in

1 BAD RS 2 SS · 02-03-2010, 03:27 PM

info. overload

WICKEDSS · 02-03-2010, 03:34 PM

HaHa like you.....I didnt want to read through them all.....Its in there somewhere

stangspanker · 02-03-2010, 03:36 PM

Transmission to Engine Block Bolts
--
10
--
50 N·m
37 lb ft

Im assuming this is for the bellhousing

Did I miss the Flywheel torq spec? For an LS3

Thanks by the way!!!

WICKEDSS · 02-03-2010, 03:40 PM

Install the remaining NEW engine flywheel bolts.
• Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft).

• Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter

And yes that is correct.......Install the transmission mounting bolts and tighten to 50 N·m (37 lb ft).

DarricSS · 02-03-2010, 03:46 PM

Holly crap! Nice info...thanks Wicked!

stangspanker · 02-03-2010, 03:55 PM

Quote:

Originally Posted by WICKEDSS

Install the remaining NEW engine flywheel bolts.
• Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft).

• Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter

And yes that is correct.......Install the transmission mounting bolts and tighten to 50 N·m (37 lb ft).

22 foot pounds..? um... so hand tight? LOL .Thats it? WOW

WICKEDSS · 02-03-2010, 04:00 PM

No problem working at a dealership i can look up any spec's on these car's......Down side is it doesnt let me post pictures for Schematic and Routing Diagrams...

DarricSS · 02-03-2010, 04:01 PM

Quote:

Originally Posted by stangspanker

22 foot pounds..? um... so hand tight? LOL .Thats it? WOW

22 ft. lbs is actually quite a bit of torque considering the size of the bolts and the amount of stretch they can take...if it was Inch pounds I would be worried...

WICKEDSS · 02-03-2010, 04:01 PM

Quote:

Originally Posted by stangspanker

22 foot pounds..? um... so hand tight? LOL .Thats it? WOW

Its 22 and then Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter.................GM does LBS and DEGREES

stangspanker · 02-03-2010, 04:04 PM

So torque to 22 foot pounds and then tighten an additional 45 degrees?
J 45059 meter? Can I buy this at any auto parts store?

WICKEDSS · 02-03-2010, 04:08 PM

Im not sure where you can get one we order out stuff through our parts

02-03-2010, 01:37 PM	#1
stangspanker Drives: Camaro Join Date: Jan 2010 Location: wa Posts: 18	Flywheel Torque Specs? Does anyone know what the Torque specs on the flywheel to crank are? and also what the tq specs are on the bellhousing. I know they are the same as stock but what is stock?

02-03-2010, 03:46 PM	#8
DarricSS Drives: '10 Camaro SS Join Date: Apr 2009 Location: Gilbert, Arizona Posts: 1,047	Holly crap! Nice info...thanks Wicked! __________________ 2010, SIM, 2SS/RS, LS3, CGM Stripes

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque Converters	CamaroSpike23	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	48	08-16-2014 02:07 AM
Stereo GUIDE ALL READ	WildBeast15	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	29	09-11-2010 01:14 AM
Brembo brake caliper torque specs	sting808	Suspension / Brakes / Chassis	6	02-03-2010 12:16 PM
Torque Converters Explained	tbyrne	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	0	01-07-2010 12:38 PM
ProTorque Converters - FREE Shipping!	tbyrne	Transmission / Driveline	0	01-07-2010 12:36 PM

02-03-2010, 03:07 PM	#2
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	Auxiliary Transmission Oil Cooler Quick Connect Fittings -- -- -- 25 N·m 18 lb ft Auxiliary Transmission Oil Cooler Brace to Skid Bar Bolt -- -- -- 25 N·m 18 lb ft Auxiliary Transmission Oil Cooler Bracket to Body Nuts -- -- -- 8 N·m 71 lb in Auxiliary Transmission Oil Cooler to Bracket Mounting Bolts -- -- -- 22 N·m 16 lb ft Case Extension to Case Assembly 16 6 M10x1.5x40 55 N·m 41 lb ft Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly 310 6 M5x0.8x55 8 N·m 71 lb in Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly 309 10 M5x0.8x45 8 N·m 71 lb in Control Solenoid Valve Heat Sink to Valve Body 312 2 M5x0.8x53 8 N·m 71 lb in Control Valve Upper Body Assembly to Control Valve Lower Body Assembly 301 12 M5x0.8x36 8 N·m 71 lb in Control (with Body and Valve) Valve Assembly to Case Assembly 22 6 M5x0.8x73 8 N·m 71 lb in Fluid Pan Assembly to Case Assembly (6L80) 30 18 M6x1.0x20 9 N·m 80 lb in Fluid Pan Assembly to Case Assembly (6L50) 30 17 M6x1.0x20 9 N·m 80 lb in Fluid Pump Cover Assembly to Torque Converter Housing 231 13 M6 1.0x40 11 N·m 97 lb in Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly 302 2 M6x1.0x20 12 N·m 106 lb in Line Pressure Test Hole Plug to Torque Converter Housing 202 1 1/8-27 NPTF 11 N·m 97 lb in Manual Shaft Detent Assembly to Valve Body 23 1 M6x1.0x14.5 12 N·m 106 lb in Prop Shaft Trans Flange to Output Shaft 39 1 M22x1.5x14 105 N·m 77 lb ft Shift Control Assembly to Body Nuts -- 4 -- 9 N·m 80 lb in Shift Control Knob Screw -- 1 -- 2 N·m 18 lb in Shift Control Linkage to Manual Shift Shaft Nut (AWD) -- 1 -- 20 N·m 15 lb ft Shift Control Linkage to Manual Shift Shaft Nut (RWD) -- 1 -- 15 N·m 11 lb ft Shift Control Linkage to Shift Control Assembly Nut -- 1 -- 9 N·m 80 lb in Torque Converter Housing Assembly to Case Assembly (6L50) 3 8 M8x1.25x50 31 N·m 23 lb ft Torque Converter Housing Assembly to Case Assembly (6L80) 3 9 M10x1.5x50 72 N·m 53 lb ft Torque Converter to Flywheel Bolts -- 3 -- 63 N·m 46 lb ft Trans Oil Level Check Plug to Fluid Pan Assembly 31 1 M12x1.75 25 N·m 18 lb ft Transmission Oil Cooler Pipe Clip to Oil Pan Nuts -- -- -- 10 N·m 89 lb in Transmission Oil Cooler Pipe Clip to Torque Tube Bolts -- -- -- 12 N·m 106 lb in Transmission Oil Cooler Pipes to Transmission Bolt -- -- -- 16 N·m 12 lb ft Transmission to Engine Block Bolts -- 10 -- 50 N·m 37 lb ft Transmission Support Assembly to Body Bolts -- 4 -- 60 N·m 44 lb ft Transmission Support Assembly to Transmission Bolts - RWD -- 2 -- 60 N·m 44 lb ft Transmission Support Assembly to Transmission Bolts - AWD -- 2 -- 110 N·m 81 lb ft *Reference number refers to the component callout number in Disassembled Views

02-03-2010, 03:11 PM	#3
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	Clutch Housing Assembly to Transmission Case Bolts 48 N·m 36 lb ft Clutch Housing Pump Plug 27 N·m 20 lb ft Concentric Slave Cylinder Bolt 12 N·m 106 lb in Coolant Temperature Sensor 39 N·m 29 lb ft Cooler Line Return Fitting 18 N·m 13 lb ft Cover Plate Bolts 20 N·m 15 lb ft Extension Housing Plug 27 N·m 20 lb ft Extension Housing to Transmission Case Bolts 48 N·m 36 lb ft Gear Select/Skip Shift Solenoid 40 N·m 30 lb ft Neutral Return Cam Spring Retaining Bolt 25 N·m 18 lb ft Propshaft Transmission Yoke Nut 136 N·m 100 lb ft Pump Outlet Cooler Fitting 17 N·m 13 lb ft Reverse Idler Shaft Bracket Bolts 25 N·m 18 lb ft Reverse Lockout Assembly Bolt 18 N·m 13 lb ft Reverse Lockout Solenoid 40 N·m 30 lb ft Shift Control Adapter Plate Bolt 18 N·m 13 lb ft Shift Control Adapter Plate Nut 12 N·m 106 lb in Shift Detent Assembly 40 N·m 30 lb ft Shift Guide Plate Bolts 22 N·m 16 lb ft Shift Lever Guide Bolts 27 N·m 20 lb ft Shift Shaft Detent Plug 24 N·m 18 lb ft Transmission Bolt 48 N·m 35 lb ft Transmission Case Drain Plug 27 N·m 20 lb ft Transmission Case Fill Plug 27 N·m 20 lb ft Transmission Fluid Pump Outlet Pipe Fitting 18 N·m 13 lb ft Transmission Fluid Temperature Sensor/Drain Plug 18 N·m 13 lb ft Transmission Mount to Transmission Case Bolts 60 N·m 44 lb ft Vehicle Speed Sensor (VSS) Bolt 11 N·m 96 lb in

02-03-2010, 03:27 PM	#4
1 BAD RS 2 SS Drives: 2010 RS 2 SS Join Date: Aug 2009 Location: FLEMING COUNTY , KY Posts: 415	info. overload

02-03-2010, 03:34 PM	#5
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	HaHa like you.....I didnt want to read through them all.....Its in there somewhere

02-03-2010, 03:36 PM	#6
stangspanker Drives: Camaro Join Date: Jan 2010 Location: wa Posts: 18	Transmission to Engine Block Bolts -- 10 -- 50 N·m 37 lb ft Im assuming this is for the bellhousing Did I miss the Flywheel torq spec? For an LS3 Thanks by the way!!!

02-03-2010, 03:40 PM	#7
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	Install the remaining NEW engine flywheel bolts. • Tighten the NEW engine flywheel bolts to 30 N·m (22 lb ft). • Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 meter And yes that is correct.......Install the transmission mounting bolts and tighten to 50 N·m (37 lb ft).

02-03-2010, 04:00 PM	#10
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	No problem working at a dealership i can look up any spec's on these car's......Down side is it doesnt let me post pictures for Schematic and Routing Diagrams...

02-03-2010, 04:04 PM	#13
stangspanker Drives: Camaro Join Date: Jan 2010 Location: wa Posts: 18	So torque to 22 foot pounds and then tighten an additional 45 degrees? J 45059 meter? Can I buy this at any auto parts store?

02-03-2010, 04:08 PM	#14
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	Im not sure where you can get one we order out stuff through our parts