V6 Flowmaster American Thunder axel-back kit - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kga10734 · 03-19-2010, 12:45 AM

Quote:

Originally Posted by Landshark

Brad, Thats cool, but watch out for the drone at 2000 rpm, I ordered the resonated x pipe today. The AMT has slightly different mufflers then my super 40's. I can't stand the drone and will adjust till I get it right.
The new x pipe gets installed on the 2nd of April. Good luck.

I would recommend people stay away from the Super 40 Series Mufflers with this engine.

I have the 40 series Delta Flow mufflers and it sounds like this series isn't as loud on the drone you are complaining about with the super 40 series. Don't get me wrong, the Delta Flow has some drone around 2,000 RPM but it isn't bad at all, you can still carry on a conversation without yelling. Also if you listen to my Delta Flow Series and the American Thunder axle back kit, they sound a lot alike and from what I have read, the guys that got the kit are pretty happy with it, like I am with my set up.

SNV · 03-19-2010, 11:53 PM

Quote:

Originally Posted by SirBrad

Thanks. I'm thinking about just going for it now. Seems like enough people like it.

I was going to get it installed on Good Friday and am out of town this weekend. I'd love to hear it first though.

Where in NJ are you?

Thanks to everyone that's been helpful so far.

I'm in Middlsex. A block out of Piscataway. I think it's exit 7 off 287. I'm free most of this Saturday and Sunday till late afternoon. I'm always up to taking a ride. Hit me up if you have time.

KMPrenger · 03-22-2010, 12:07 AM

KFH....looking forward to clips! Howd it go??

KFH · 03-22-2010, 09:15 AM

Phaze one complete, the kit on its own is much louder and deeper than any clip can reproduce. There is a drone at around 2000 rpm at light load, but none when your off the gas. The Magnaflow resonated x-pipe is on order and should arrive later this week and that should help mellow things out.

Landshark · 03-22-2010, 12:14 PM

Quote:

Originally Posted by KFH

Phaze one complete, the kit on its own is much louder and deeper than any clip can repoduce. There is a drone at around 2000 rpm at light load, but none when your off the gas. The Magnaflow resonated x-pipe is on order and should arrive later this week and that should help mellow things out.

KFH,
I will be REAL interested in how the resonated X pipe helps the drone. The one I ordered does not get installed till the 2nd of April. Good luck!

KMPrenger · 03-22-2010, 12:15 PM

I too will be interested!

Primus · 03-22-2010, 08:04 PM

I bit the bullet and ordered from lmperformance.com for $430 shipped. I went back and forth between MRT V1 and 2 and the SLP options but decided on this as the best bang for the buck especially since they are in stock and I've dealt with lmperfomance.com and was very happy with their products. I really like the 4" tips too.

SirBrad · 03-25-2010, 08:33 PM

Got my Tru-X today.

Gonna get that and the AT kit installed next Saturday!

Hope I love it.

FirstCamaro2k10 · 03-25-2010, 09:04 PM

I hope you love it too, alot of $$$. Best of luck!!!!

KFH · 03-25-2010, 09:16 PM

My Magnaflow resonated x-pipe has arrived and will be installed on Saturday. Stay tuned for my update.

SDCamaro10 · 03-25-2010, 09:33 PM

Primus · 03-26-2010, 03:37 PM

Got my FAT today and I'm installing it tomorrow. I look forward to hearing how you like the x-pipe. I might think about doing it depending on the sound from just the FAT. I love that acronym.

MIKnam67 · 03-26-2010, 06:26 PM

Quote:

Originally Posted by kga10734

I would recommend people stay away from the Super 40 Series Mufflers with this engine.

I have the 40 series Delta Flow mufflers and it sounds like this series isn't as loud on the drone you are complaining about with the super 40 series. Don't get me wrong, the Delta Flow has some drone around 2,000 RPM but it isn't bad at all, you can still carry on a conversation without yelling. Also if you listen to my Delta Flow Series and the American Thunder axle back kit, they sound a lot alike and from what I have read, the guys that got the kit are pretty happy with it, like I am with my set up.

I think you will get the "drone" somewhere in the rpm range nomatter what exhaust system you go to unless you stay stock (packed with steel wool) or install quality sound deadening material.

a red maro · 03-27-2010, 01:41 AM

I'm still looking at a flowmaster axelback kit for my 2LT. the only thing is i don't want it to be too loud. I've owned a car like that before, and it gets really annoying after a year. I was thinking about getting the 40 series delta axel back kit but I still need some feed back on the sound.

03-22-2010, 12:07 AM	#115
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,967	KFH....looking forward to clips! Howd it go?? __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

03-22-2010, 09:15 AM	#116
KFH 1SS Victory Red Manual Drives: 2010 1SS 6 Speed Manual Join Date: Apr 2009 Location: Oakville, ON, Canada Posts: 215	Phaze one complete, the kit on its own is much louder and deeper than any clip can reproduce. There is a drone at around 2000 rpm at light load, but none when your off the gas. The Magnaflow resonated x-pipe is on order and should arrive later this week and that should help mellow things out. __________________ 1st Camaro - 77 Type LT Rally Sport, 3 Speed Manual, Inline 6 2nd - 94 Z28, 6 Speed Manual LT1 V8 3rd - 2010 1LT, 6 Speed Manual LLT V6 4th - 2010 1SS, 6 Speed Manual LS3 V8, RX Catch Can, Holley iNTECH CAI, Flowmaster Force II Exhaust Last edited by KFH; 03-22-2010 at 01:04 PM.

03-22-2010, 12:15 PM	#118
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,967	I too will be interested! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

03-22-2010, 08:04 PM	#119
Primus 2G1FF1EV0A9113319 Drives: 2010 1LT/RS 6MT Join Date: Oct 2008 Location: St. Louis, MO Posts: 1,139 View My Garage	I bit the bullet and ordered from lmperformance.com for $430 shipped. I went back and forth between MRT V1 and 2 and the SLP options but decided on this as the best bang for the buck especially since they are in stock and I've dealt with lmperfomance.com and was very happy with their products. I really like the 4" tips too. __________________ 2010 Camaro 1LT/RS M6 Black 1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009

03-25-2010, 09:16 PM	#122
KFH 1SS Victory Red Manual Drives: 2010 1SS 6 Speed Manual Join Date: Apr 2009 Location: Oakville, ON, Canada Posts: 215	My Magnaflow resonated x-pipe has arrived and will be installed on Saturday. Stay tuned for my update. __________________ 1st Camaro - 77 Type LT Rally Sport, 3 Speed Manual, Inline 6 2nd - 94 Z28, 6 Speed Manual LT1 V8 3rd - 2010 1LT, 6 Speed Manual LLT V6 4th - 2010 1SS, 6 Speed Manual LS3 V8, RX Catch Can, Holley iNTECH CAI, Flowmaster Force II Exhaust

03-25-2010, 08:33 PM	#120
SirBrad The Captain Drives: 2010 2LT/RS SIM Join Date: May 2009 Location: Freehold, NJ Posts: 1,499	Got my Tru-X today. Gonna get that and the AT kit installed next Saturday! Hope I love it.

03-25-2010, 09:04 PM	#121
FirstCamaro2k10 Drives: 2010 Silver Ice Metallic Camaro LS Join Date: Feb 2010 Location: Just North of Beaumont, TX Posts: 731 View My Garage	I hope you love it too, alot of $$$. Best of luck!!!!

03-25-2010, 09:33 PM	#123
SDCamaro10 Drives: 2010 Camaro 1LT RJT Join Date: Feb 2010 Location: San Diego, CA Posts: 1,951	__________________

03-26-2010, 03:37 PM	#124
Primus 2G1FF1EV0A9113319 Drives: 2010 1LT/RS 6MT Join Date: Oct 2008 Location: St. Louis, MO Posts: 1,139 View My Garage	Got my FAT today and I'm installing it tomorrow. I look forward to hearing how you like the x-pipe. I might think about doing it depending on the sound from just the FAT. I love that acronym. __________________ 2010 Camaro 1LT/RS M6 Black 1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009

03-27-2010, 01:41 AM	#126
a red maro Drives: Victory Red 2lt RS V6 auto Join Date: Mar 2010 Location: Alice Tx. Posts: 156	I'm still looking at a flowmaster axelback kit for my 2LT. the only thing is i don't want it to be too loud. I've owned a car like that before, and it gets really annoying after a year. I was thinking about getting the 40 series delta axel back kit but I still need some feed back on the sound.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	612	09-06-2024 09:00 AM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 07:53 PM
V6 GFX front lip back ordered or not???	Yellow1lt	Cosmetics and Lighting Modification Discussions	0	09-22-2009 11:04 AM
At Witz’ End: What’s an American Car?	KILLER74Z28	General Automotive + Other Cars Discussion	12	03-02-2007 03:09 PM