Paintless Dent Repair at C5Fest? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

calflan · 04-15-2010, 03:17 PM

Everyone, I was lucky enough to meet up with Batman - he diverted his trip en route to CamaroFest to my home - and he repaired 2 dents I had in my car. One was about the size a baseball would make on my right rear quarter above the wheel. The other a door ding on the drivers side door body line. He did an AWESOME job ! There are absolutely NO traces of any such items any more. If you have any doubts whatsoever about letting someone work dings or dents on your car, Batman does quality work, have no concerns.

Look for Batman at Camaro 5 fest. He has his tools and looking to make the trip worth his while. His rate was extremely reasonable and again quality top notch.

Batman0837 · 04-15-2010, 10:49 PM

Quote:

Originally Posted by calflan

Everyone, I was lucky enough to meet up with Batman - he diverted his trip en route to CamaroFest to my home - and he repaired 2 dents I had in my car. One was about the size a baseball would make on my right rear quarter above the wheel. The other a door ding on the drivers side door body line. He did an AWESOME job ! There are absolutely NO traces of any such items any more. If you have any doubts whatsoever about letting someone work dings or dents on your car, Batman does quality work, have no concerns.

Look for Batman at Camaro 5 fest. He has his tools and looking to make the trip worth his while. His rate was extremely reasonable and again quality top notch.

Thanks for the kind words! I am glad you were pleased with the results too! It was a real pleasure meeting you and your family and hanging out for a bit. Hope to see you guys at the Fest!

Batman0837 · 04-15-2010, 11:07 PM

To everyone who has replied to my PMs, I will be contacting you guys throughout the day tomorrow to make arrangements to meet up either Friday or Saturday. Matt I got your text/pic and I will get in touch Friday...

Batman0837 · 04-17-2010, 07:59 AM

I had many opportunities to repair dents for several members yesterday. All fine and pleasant members and it was my pleasure to do business with you all! Looking forward to a busy day at the track. This event has been awesome so far!!

InvaderMoose · 04-17-2010, 08:58 AM

I'll vouch for Batman0837. I had a door ding, and he flawlessly fixed it in about 5 minutes. You cant even tell anything was there. Thanks again

colemanvoice · 04-17-2010, 09:02 PM

Batman! I hope you're still around and available. I'm gonna give you a call. I didn't need your service until today. I did a "walk around" before leaving today, and sure enough, I've got a dent. I'm concerned though. This is from the inside out. Something caught the inside of my fender and dented it out.

Like I said, I'm gonna give you a call, but felt like posting.

franknbeans · 04-17-2010, 11:17 PM

pulling that ding on the crease is very impressive.

Skyblu · 04-19-2010, 02:07 PM

Thanks for fixing the dent above the Camaro sign on the side of my ABM! It looks better than new! Great job and very affordable! Thanks again.

Sterling · 04-19-2010, 02:14 PM

Thanks for helping everyone out... I snapped this pic of you right before you fixed a dent in the door of that ABM car in the background...

*GTAHVIT* · 04-19-2010, 02:26 PM

Chris,

Well done man. I'm glad it worked out for you!

calflan · 04-19-2010, 05:25 PM

Chris, hope you made it back safely. Sounds like you had a really productive weekend. Did you actually get to sit and have a beer at any time ??
P.S. my son won't stop talking about your 'Batmobile'. He's sold on your color combination and especially was nuts about the fender emblems.
Thanks again !

Jamie Mac · 04-19-2010, 06:18 PM

Chris, thanks so much for fixing my car. I was just sick about the damage caused when my canopy hit it. Having you there to get the dent out of the door really eased my mind. Thanks again, Jamie MacPherson

Batman0837 · 04-19-2010, 06:37 PM

Quote:

Originally Posted by calflan

Chris, hope you made it back safely. Sounds like you had a really productive weekend. Did you actually get to sit and have a beer at any time ??
P.S. my son won't stop talking about your 'Batmobile'. He's sold on your color combination and especially was nuts about the fender emblems.
Thanks again !

Hey! Yeah I just got in at 6:30 this morning. I was in no mood to drive for 12+ hrs yesterday when I finally wrapped things up at the hotel around noon. So I caught a movie ("Kick-Ass") before leaving town. I hit Fayetteville, NC around 11:30 and a little later around 2am pulled into a rest stop for a quick 1.5hr nap. Finally arrived in the driveway here in Delaware at 6:35.

I thinks it's great that your son liked my car, very flattering that someone can appreciate the look I was after and although none of it was difficult it took a few tweaks to get it there....It was great to meet you and I'm also glad that your repairs were successful. Hopefully our paths will cross again even if it's once a year at C5Fest

Quote:

Originally Posted by Jamie Mac

Chris, thanks so much for fixing my car. I was just sick about the damage caused when my canopy hit it. Having you there to get the dent out of the door really eased my mind. Thanks again, Jamie MacPherson

Jamie, I was happy to help take the sting out a bit for that unfortunate mishap. Hopefully your able to find the right guy to take care of the touch-ups.

Thanks again guys

Chris

Batman0837 · 04-19-2010, 06:45 PM

Everyone, Thank you for making my trip down to Georgia a successful one. Paintless Dent Repair is incredibly effective on the right sized damage and I can only think of 2 cars out of ~20-25 that I was not able to fix and those 2 people had a feeling that their damage may be a little extreme. I even surprised myself on the last one I fixed. But PDR is always a "WIN" for everyone involved because it's fast, effective and best of all inexpensive!! Schedule permitting, I hope to attend again next year and help relieve everyone of those annoying little dings and dents!!

All of your kinds words are greatly appreciated!

Chris

04-15-2010, 03:17 PM	#29
calflan Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009 Location: Heath, Tx. Posts: 499	Everyone, I was lucky enough to meet up with Batman - he diverted his trip en route to CamaroFest to my home - and he repaired 2 dents I had in my car. One was about the size a baseball would make on my right rear quarter above the wheel. The other a door ding on the drivers side door body line. He did an AWESOME job ! There are absolutely NO traces of any such items any more. If you have any doubts whatsoever about letting someone work dings or dents on your car, Batman does quality work, have no concerns. Look for Batman at Camaro 5 fest. He has his tools and looking to make the trip worth his while. His rate was extremely reasonable and again quality top notch. __________________ 1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I]

04-17-2010, 08:58 AM	#33
InvaderMoose Drives: 2010 2SS/RS CGM Join Date: Apr 2010 Location: N/A Posts: 958	I'll vouch for Batman0837. I had a door ding, and he flawlessly fixed it in about 5 minutes. You cant even tell anything was there. Thanks again __________________ Engine/Appearance: 530 RWHP Whipple supercharger, Full JBA Exhaust, Ported TB, Cold Air Inductions & ADM Scoop /Complete new paint, 20" Forgestar F14s, Sinister hood, SLP Spoiler, AAC Halos, P13W Fogs

04-17-2010, 09:02 PM	#34
colemanvoice team chicklet camaro Drives: MOTL3Y Join Date: Jan 2009 Location: Cumming GA Posts: 1,384 View My Garage	Batman! I hope you're still around and available. I'm gonna give you a call. I didn't need your service until today. I did a "walk around" before leaving today, and sure enough, I've got a dent. I'm concerned though. This is from the inside out. Something caught the inside of my fender and dented it out. Like I said, I'm gonna give you a call, but felt like posting. __________________

04-17-2010, 11:17 PM	#35
franknbeans Whipped Drives: 2010 CAMARO Join Date: Sep 2008 Location: Pittsburgh-ish - PA Posts: 4,216 View My Garage	pulling that ding on the crease is very impressive. __________________ Car of the week 7/7/14

04-19-2010, 02:14 PM	#37
Sterling Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007 Location: Fairhaven, MA Posts: 5,882 View My Garage	Thanks for helping everyone out... I snapped this pic of you right before you fixed a dent in the door of that ABM car in the background... __________________ Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats

04-15-2010, 11:07 PM	#31
Batman0837 Drives: '10 CGM 2SS/RS # 71394 Join Date: Sep 2009 Location: Middletown, DE Posts: 365	To everyone who has replied to my PMs, I will be contacting you guys throughout the day tomorrow to make arrangements to meet up either Friday or Saturday. Matt I got your text/pic and I will get in touch Friday...

04-17-2010, 07:59 AM	#32
Batman0837 Drives: '10 CGM 2SS/RS # 71394 Join Date: Sep 2009 Location: Middletown, DE Posts: 365	I had many opportunities to repair dents for several members yesterday. All fine and pleasant members and it was my pleasure to do business with you all! Looking forward to a busy day at the track. This event has been awesome so far!!

04-19-2010, 02:07 PM	#36
Skyblu Drives: 2010 Aqua blue 2SS/RS M6 Join Date: Jul 2009 Location: Florida Posts: 990	Thanks for fixing the dent above the Camaro sign on the side of my ABM! It looks better than new! Great job and very affordable! Thanks again.

04-19-2010, 02:26 PM	#38
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	Chris, Well done man. I'm glad it worked out for you! __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-19-2010, 05:25 PM	#39
calflan Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009 Location: Heath, Tx. Posts: 499	Chris, hope you made it back safely. Sounds like you had a really productive weekend. Did you actually get to sit and have a beer at any time ?? P.S. my son won't stop talking about your 'Batmobile'. He's sold on your color combination and especially was nuts about the fender emblems. Thanks again ! __________________ 1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I]

04-19-2010, 06:18 PM	#40
Jamie Mac NCM-WINR Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009 Location: Pittsburgh Posts: 2,324	Chris, thanks so much for fixing my car. I was just sick about the damage caused when my canopy hit it. Having you there to get the dent out of the door really eased my mind. Thanks again, Jamie MacPherson __________________ also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.

04-19-2010, 06:45 PM	#42
Batman0837 Drives: '10 CGM 2SS/RS # 71394 Join Date: Sep 2009 Location: Middletown, DE Posts: 365	Everyone, Thank you for making my trip down to Georgia a successful one. Paintless Dent Repair is incredibly effective on the right sized damage and I can only think of 2 cars out of ~20-25 that I was not able to fix and those 2 people had a feeling that their damage may be a little extreme. I even surprised myself on the last one I fixed. But PDR is always a "WIN" for everyone involved because it's fast, effective and best of all inexpensive!! Schedule permitting, I hope to attend again next year and help relieve everyone of those annoying little dings and dents!! All of your kinds words are greatly appreciated! Chris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paintless Dent Removal Suggestions	metalaxe	USA - Southwest	6	07-17-2010 11:46 PM
Dent behind Camaro Emblem on Fender	LineofPerfection	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	25	01-23-2010 10:30 AM
How to access rear dirvers side fender for dent repair.	bbfn11	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	12	12-01-2009 03:48 PM
HELP Paintless Dent Removal Austin?	Mod007	USA - Texas	6	08-25-2009 01:42 PM
And Another Car Crash...	GTAHVIT	Off-topic Discussions	73	01-12-2009 12:43 PM