Lingenfelter Performance Engineering Customers - Page 232 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RS-SS2 · 04-21-2010, 10:37 AM

Very very nice Garth. Is she complete now or are there more mods to come?

RS-SS2 · 04-21-2010, 10:39 AM

Quote:

Originally Posted by barrylnv

Guys, when you get a chance check out page 84 of the June issue of Hot Rod magazine. That blue beast is sitting in my garage! The day my brother and I watched dyno tuning Hot Rod had called asking for photos of a 650 car on the dyno and Jeff asked me if it was OK if they used my car. After I debated for hours (haha, NOT!), I agreed. I'm stoked to see my car in Hot Rod!

Congrats Barry, I will have to pick that issue up and check it out.
Got any stories for us?

Speed74SS · 04-21-2010, 11:03 AM

Quote:

Originally Posted by barrylnv

Guys, when you get a chance check out page 84 of the June issue of Hot Rod magazine. That blue beast is sitting in my garage! The day my brother and I watched dyno tuning Hot Rod had called asking for photos of a 650 car on the dyno and Jeff asked me if it was OK if they used my car. After I debated for hours (haha, NOT!), I agreed. I'm stoked to see my car in Hot Rod!

Awesome!! I am going to pick up the hot rod mag for sure. Congrats Barry

Stripes look great Garth - time to drive that beast

*GTAHVIT* · 04-21-2010, 11:59 AM

Quote:

Originally Posted by JusticePete

You have no idea how much I wanted to be there. Everyone is telling me what a GREAT event it was. I should have Camarovanned down with the GM and Michigan guys, but nooo I was being smart and flying down. How is your Henry Camaro doing?

Not to Jack the LPE thread. But I couldn't be happier with THR. And the Tuner has me set up with a great tune. 530hp and 523 Torq at the wheels before the CAI...

My only regret at the fest was that I didn't get a chance to drive on the strip or autoX...

Speedster and I are gonna get some track time in here soon.

Next time drinks are on me. Don't know if I can top that Aussie Beer though...

*GTAHVIT* · 04-21-2010, 12:01 PM

For what it's worth to you guys.

I thought the LPE cars were the best looking group in the bunch at the fest. And Jeff and his guys were so accomodating. I needed him to jump through a couple hoops for me and he was more than willing.

I am really impressed with that organization.

600hp-lpe · 04-21-2010, 01:30 PM

Quote:

Originally Posted by GTAHVIT

For what it's worth to you guys.

I thought the LPE cars were the best looking group in the bunch at the fest. And Jeff and his guys were so accomodating. I needed him to jump through a couple hoops for me and he was more than willing.

I am really impressed with that organization.

Everyone at LPE is that way... they are all great!

600hp-lpe · 04-21-2010, 01:33 PM

Quote:

Originally Posted by RS-SS2

Very very nice Garth. Is she complete now or are there more mods to come?

Finished? Doubtful... LOL

Slowing down Like me... maybe, but never finished.

Besides, his Buddy MTNCWBY keeps upping the ante with newer and better things to add.

barrylnv · 04-21-2010, 03:37 PM

All - thanks, I am definitely going to buy up a lot of copies of June issue and file them safely away!

570 - congrats on being Camaro of the week, man your car just looks incredible. Personally, I think yours and Paul's are the hottest looking cars on this site, though that is like trying to choose your favorite blonde in the Miss America pageant

Paul - saw some great pics of yours from C5Fest. I wanted to go so bad and almost did but family had flu and had to stay home and help with the little ones. As soon as I see dates/location for next year I am booking. No way can i miss 2 yrs in a row!

Garth - sweet, man. You know you're becoming one of the bigger addicts on this site, right? Ah well, I hear it happens to the best of us

barrylnv · 04-21-2010, 03:39 PM

RS - don't have any more stories yet, other than there is a GT500 close to me that I am still trying to track down. The valley I live in is pretty small and a lot of people there now know I have a LPE650. Funny, about that time, I don't see the GT500 any more. Maybe it has to do with my license plate trim - "I Love Shelby GT500s, They Taste Like Chicken".

Maybe he is chicken, but I WANT TO FIND HIM!!!

Blue70SS · 04-21-2010, 07:31 PM

Quote:

Originally Posted by RS-SS2

Very very nice Garth. Is she complete now or are there more mods to come?

Lots of clearbra next week - going with Nanofusion on paint and 3M on lights. Still waiting on Pfadt coilovers and control arm bushing kit to arrive. Then will install with already arrived camber plates and end links for swaybars. Lower about 1 1/4", install 305's on rear/ 275's up front and get aligned. Looks like Racing Brake rear rotors are still about 6-8 weeks out. Have ACC LED DLR bulbs to install and Amber footwell lighting too. Then raptor shift light with launch feature is also awaiting the install, along with AFR bosch sensor and Ipod/PLX system for additional guages and recordability. Might do line locks later. Possible some dynomat below carpeting and in trunk. Down the road, ....maybe wheels (have 2 sets of polished already).

Then there's that rear driveshaft loop or entire replacement shaft lurking out there

mws444 · 04-21-2010, 08:24 PM

Quote:

Originally Posted by barrylnv

RS - don't have any more stories yet, other than there is a GT500 close to me that I am still trying to track down. The valley I live in is pretty small and a lot of people there now know I have a LPE650. Funny, about that time, I don't see the GT500 any more. Maybe it has to do with my license plate trim - "I Love Shelby GT500s, They Taste Like Chicken".

Maybe he is chicken, but I WANT TO FIND HIM!!!

I Love it!

mws444 · 04-21-2010, 08:25 PM

Quote:

Originally Posted by Blue70SS

Lots of clearbra next week - going with Nanofusion on paint and 3M on lights. Still waiting on Pfadt coilovers and control arm bushing kit to arrive. Then will install with already arrived camber plates and end links for swaybars. Lower about 1 1/4", install 305's on rear/ 275's up front and get aligned. Looks like Racing Brake rear rotors are still about 6-8 weeks out. Have ACC LED DLR bulbs to install and Amber footwell lighting too. Then raptor shift light with launch feature is also awaiting the install, along with AFR bosch sensor and Ipod/PLX system for additional guages and recordability. Might do line locks later. Possible some dynomat below carpeting and in trunk. Down the road, ....maybe wheels (have 2 sets of polished already).

Then there's that rear driveshaft loop or entire replacement shaft lurking out there

Yep you've got it bad. Mod on!

mws444 · 04-21-2010, 08:27 PM

Barry congrats! Hot Rod is too cool.

mws444 · 04-21-2010, 08:29 PM

570 I had to post on your Camaro of the week thread......Cangrats on a great build!

04-21-2010, 10:37 AM	#3235
RS-SS2 Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009 Location: Albuquerque Posts: 377 View My Garage	Very very nice Garth. Is she complete now or are there more mods to come? __________________ Beware of the LPE Brotherhood

04-21-2010, 12:01 PM	#3239
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	For what it's worth to you guys. I thought the LPE cars were the best looking group in the bunch at the fest. And Jeff and his guys were so accomodating. I needed him to jump through a couple hoops for me and he was more than willing. I am really impressed with that organization. __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-21-2010, 03:37 PM	#3242
barrylnv Drives: 2010 2SS IMB LS3/M6 Join Date: Jul 2009 Location: Reno, NV Posts: 137	All - thanks, I am definitely going to buy up a lot of copies of June issue and file them safely away! 570 - congrats on being Camaro of the week, man your car just looks incredible. Personally, I think yours and Paul's are the hottest looking cars on this site, though that is like trying to choose your favorite blonde in the Miss America pageant Paul - saw some great pics of yours from C5Fest. I wanted to go so bad and almost did but family had flu and had to stay home and help with the little ones. As soon as I see dates/location for next year I am booking. No way can i miss 2 yrs in a row! Garth - sweet, man. You know you're becoming one of the bigger addicts on this site, right? Ah well, I hear it happens to the best of us __________________ 2010 2SS LS3/M6 Imperial Blue 650HP LPE Package - 576.3 RWHP, 91-tune 4.10 Richmond Gears ZR1 Clutch / LPE Flywheel LPE IBM Coil Covers Thorley Shorty Headers Borla 140280 Cat-back ADM Boost Gauge MTI Shifter Hotchkis Sway Bars LPE Floor Mats SRP Heel-Toe Pedals

04-21-2010, 03:39 PM	#3243
barrylnv Drives: 2010 2SS IMB LS3/M6 Join Date: Jul 2009 Location: Reno, NV Posts: 137	RS - don't have any more stories yet, other than there is a GT500 close to me that I am still trying to track down. The valley I live in is pretty small and a lot of people there now know I have a LPE650. Funny, about that time, I don't see the GT500 any more. Maybe it has to do with my license plate trim - "I Love Shelby GT500s, They Taste Like Chicken". Maybe he is chicken, but I WANT TO FIND HIM!!! __________________ 2010 2SS LS3/M6 Imperial Blue 650HP LPE Package - 576.3 RWHP, 91-tune 4.10 Richmond Gears ZR1 Clutch / LPE Flywheel LPE IBM Coil Covers Thorley Shorty Headers Borla 140280 Cat-back ADM Boost Gauge MTI Shifter Hotchkis Sway Bars LPE Floor Mats SRP Heel-Toe Pedals

04-21-2010, 08:27 PM	#3247
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Barry congrats! Hot Rod is too cool. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

04-21-2010, 08:29 PM	#3248
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	570 I had to post on your Camaro of the week thread......Cangrats on a great build! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM