Lingenfelter Performance Engineering Customers - Page 231 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Graham Behan · 04-20-2010, 06:38 PM

Quote:

Originally Posted by RS-SS2

I think there may have been one on the LPE LS9 car?

That would have been modified "Stock" with the 9.5" diff and Stock with the back up diff we put in after the Modified half shaft failed.

Graham

mws444 · 04-20-2010, 07:57 PM

Quote:

Originally Posted by Graham Behan

That would have been modified "Stock" with the 9.5" diff and Stock with the back up diff we put in after the Modified half shaft failed.

Graham

Sooo spill the beans! I know you guys have something in the works over there. I know this car really suffers from a serious lack of traction I know I could sure use some help! I am all ears!

JusticePete · 04-20-2010, 08:41 PM

Quote:

Originally Posted by 570hp-lpe

Pete, What's up for the next event for the Pedders Camaro?

Pedders Day at Back Street Performance in Medinah, Ohio May 22, then the Indianapolis 500. The Pace Cars are wearing Pedders Xa coilovers, sway bars, radius and sub-frame inserts so we are really excited about attending. It gets better. Our friend Paul Tracy has an Indy ride so we get t see him and his crew. We'll put something together with the Indiana Central Indiana Camaro Club and Bruce Raymond (Raymond's Alignment). Then there is the event that I am not ready to talk about, but I will say we'll be at Gingerman for a couple of test and tune sessions over the next few weeks. We have a new product release coming very soon. Oh well, not much new here

mws444 · 04-20-2010, 08:45 PM

Quote:

Originally Posted by JusticePete

Pedders Day at Back Street Performance in Medinah, Ohio May 22, then the Indianapolis 500. The Pace Cars are wearing Pedders Xa coilovers, sway bars, radius and sub-frame inserts so we are really excited about attending. It gets better. Our friend Paul Tracy has an Indy ride so we get t see him and his crew. We'll put something together with the Indiana Central Indiana Camaro Club and Bruce Raymond (Raymond's Alignment). Then there is the event that I am not ready to talk about, but I will say we'll be at Gingerman for a couple of test and tune sessions over the next few weeks. We have a new product release coming very soon. Oh well, not much new here

Hey you could PM me about the new product....may just have to add it to the parts on order.

JusticePete · 04-20-2010, 08:52 PM

Quote:

Originally Posted by mws444

Hey you could PM me about the new product....may just have to add it to the parts on order.

You may want to check out the Pedders pictures on FB. The official release will be on thi forum very soon. http://www.facebook.com/album.php?ai...158585997&op=6

*GTAHVIT* · 04-20-2010, 09:34 PM

I'm very upset with you Pete.....

you didn't show up to the fest.....

You should give me a set of coils to make up for it.....

Sorry you missed it. Was looking forward to picking your brain again.

However something tells me there would have been too many blondes around to get anything good out of you...

JusticePete · 04-20-2010, 09:53 PM

Quote:

Originally Posted by GTAHVIT

I'm very upset with you Pete.....

you didn't show up to the fest.....

You should give me a set of coils to make up for it.....

Sorry you missed it. Was looking forward to picking your brain again.

However something tells me there would have been too many blondes around to get anything good out of you...

You have no idea how much I wanted to be there. Everyone is telling me what a GREAT event it was. I should have Camarovanned down with the GM and Michigan guys, but nooo I was being smart and flying down. How is your Henry Camaro doing?

Blue70SS · 04-20-2010, 10:48 PM

Quote:

Originally Posted by 2010 BADSS

Since RS isn't sharing,

I'll post this on his behalf. Cool picture of his linelock installed and in action!

Attachment 115178

Nice burnout!

Line locks could come in handy.

Quote:

Originally Posted by mws444

Finally got the new shoes on!

Now I know I will have to do some pearl ghost stripes in the first gen rally style, and a couple of touches in the interior.

Man when does this Mod Bug quit?

Cool wheels MWS, I'm a big fan of the polished look.

FYI, no cure found for Mod Bug yet!

Quote:

Originally Posted by Speed74SS

Nice looking shoes MWS!!

I had a great time at the fest. It was great to hang out with Blue and meet his family as well as hang out with Paul and "hear" his car run

Oh yeah - the LPE LS9 car was bad azzzz too!! And of course the crew from LPE are always top notch

Great hanging out with you guys Speed and Paul! Definitely a blast.

Quote:

Originally Posted by redndallas

Looking to get some new shoes on the maro anyone have some good options. both tires and rims ( looking at ccw rims)

Welcome to the LPE group REDNDALLAS

600hp-lpe · 04-20-2010, 11:00 PM

Blue, How's the paint job coming along? is it done yet?

Blue70SS · 04-20-2010, 11:06 PM

Quote:

Originally Posted by 570hp-lpe

Blue, How's the paint job coming along? is it done yet?

Picked up Camaro from painter on return from Cfest last night.
I'll have to post up better pics later, but this best I have till back in town and sunshine comes out.

barrylnv · 04-20-2010, 11:13 PM

Guys, when you get a chance check out page 84 of the June issue of Hot Rod magazine. That blue beast is sitting in my garage! The day my brother and I watched dyno tuning Hot Rod had called asking for photos of a 650 car on the dyno and Jeff asked me if it was OK if they used my car. After I debated for hours (haha, NOT!), I agreed. I'm stoked to see my car in Hot Rod!

Blue70SS · 04-21-2010, 01:46 AM

Quote:

Originally Posted by barrylnv

Guys, when you get a chance check out page 84 of the June issue of Hot Rod magazine. That blue beast is sitting in my garage! The day my brother and I watched dyno tuning Hot Rod had called asking for photos of a 650 car on the dyno and Jeff asked me if it was OK if they used my car. After I debated for hours (haha, NOT!), I agreed. I'm stoked to see my car in Hot Rod!

Wow - that's amazing, better buy a few issues. That would be nice for car shows and memorabilia. Growing up we used to drool over the Hot Rod magazine pics and now we're in the same class of cars.

.... so many HOT Camaros!!!!!!!!!!!!

mws444 · 04-21-2010, 07:33 AM

Quote:

Originally Posted by JusticePete

You may want to check out the Pedders pictures on FB. The official release will be on thi forum very soon. http://www.facebook.com/album.php?ai...158585997&op=6

Got it!

600hp-lpe · 04-21-2010, 08:31 AM

Looks good Garth! I like those stripes.. They look somehow familier

I saw that picture in Hot rod.. Nice! Congrat's Barry!

04-20-2010, 09:34 PM	#3226
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	I'm very upset with you Pete..... you didn't show up to the fest..... You should give me a set of coils to make up for it..... Sorry you missed it. Was looking forward to picking your brain again. However something tells me there would have been too many blondes around to get anything good out of you... __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-20-2010, 11:13 PM	#3231
barrylnv Drives: 2010 2SS IMB LS3/M6 Join Date: Jul 2009 Location: Reno, NV Posts: 137	Guys, when you get a chance check out page 84 of the June issue of Hot Rod magazine. That blue beast is sitting in my garage! The day my brother and I watched dyno tuning Hot Rod had called asking for photos of a 650 car on the dyno and Jeff asked me if it was OK if they used my car. After I debated for hours (haha, NOT!), I agreed. I'm stoked to see my car in Hot Rod! __________________ 2010 2SS LS3/M6 Imperial Blue 650HP LPE Package - 576.3 RWHP, 91-tune 4.10 Richmond Gears ZR1 Clutch / LPE Flywheel LPE IBM Coil Covers Thorley Shorty Headers Borla 140280 Cat-back ADM Boost Gauge MTI Shifter Hotchkis Sway Bars LPE Floor Mats SRP Heel-Toe Pedals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

04-20-2010, 11:00 PM	#3229
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Blue, How's the paint job coming along? is it done yet?

04-21-2010, 08:31 AM	#3234
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Looks good Garth! I like those stripes.. They look somehow familier I saw that picture in Hot rod.. Nice! Congrat's Barry!