Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 05-11-2010, 10:04 PM   #71
The 2010 Sin
Dont H8 Me Cuz U Aint Me
 
The 2010 Sin's Avatar
 
Drives: 2016 SS Sedan, 2017 Explorer Sport
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,910
Cant wait to receive mine and get them installed before Monday. The car gets shipped off for the big cam install in OKC :-)
__________________
The 2010 Sin is offline   Reply With Quote
Old 05-12-2010, 12:56 AM   #72
Ivan @ Southwest Speed
 
Drives: '15 Z06, '01 NBM SS, '97 SS
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,161
Quote:
Originally Posted by RuffEL View Post
sorry, im a novice at this stuff and im racking my brain the last few days trying to make the informed decision to buy the right product.....

im tellin ya you guys totally sold me on the DTs....im lookin at matching a DT 1 7/8" with the borla ATAK cat back system (already bought so suggestions on that are kinda mute)...

the only kicker to me surely buying these heds is the cats.....i dont want legal issues and i would really kinda like to have an all in one "ENGINEERED that way" system AND keep within the law...and not throw my ECU through a loop (definately want the warranty so im not tuning til its expired).

advice and product suggestions would be greatly appreciated!!!

the spiral wound steel core cats mentioned above sound like an add-on to this product....what are the drawbacks to doing that setup (...and if i find them acceptable: ) and what are some good brands/vendors to look for for those components.


sorry for being dense on these issues, but im almost jewish with my money
Last time I checked, there wasn't a Money Tree available at the Lowe's Gardening Center so you aren't alone.

DT doesn't have a Catted LT available...yet...I tread lightly because everything in the industry is different now.

Long gone are the days of million dollar inventories and the likes. Those are the businesses that went out of business. It's all about the turns nowadays which means everything is taking more time to produce since the companies don't want to get stuck with all kinds of inventory on hand when economies take the proverbial crap.

With that said, I forsee a catted LT on the horizon for Doug Thorley. It only makes sense.

What I've seen alot of the fellas doing is replacing the connection piping and installing a spiral wound hi flow cat in it's place. Relatively cheaper and easier to do locally.

Still awaiting pics from those who did it...

Cue the pics...nowish.

But in all honesty, a catted (read "engineered that way") Long Tube is going to be in the neighborhood of $1000. Kooks run about $1250 and ARH a hair less. That's what I can tell you about the brands I deal in.

For a little more than half of those, it's no wonder why alot of the guys are running these DT LT's and catting them locally.

Here are a couple examples of High Flow Cats I'd consider if I had to install them myself:

$105 each
http://www.c5racer.com/catalog/Corve...gn=export_feed

$189 a pair
http://www.latemodelrestoration.com/...onverters-Pair

Just a couple thoughts and ideas...

And of course, let me know if you need the actual Long Tubes.

Best of luck and keep us posted!,
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 05-12-2010, 01:09 AM   #73
RuffEL
Semper Fi! Do or DIE!
 
Drives: '10 camaro 1SS, '02 silverado 1500
Join Date: Sep 2009
Location: Schertz actually...
Posts: 301
thanx karma....i appreciate the help....im gonna get the diabolical genious eggheads i know together and we'll put together something that suits my needs....im DEFINATELY leaning towards these DTs tho!
RuffEL is offline   Reply With Quote
Old 05-12-2010, 01:40 AM   #74
Ivan @ Southwest Speed
 
Drives: '15 Z06, '01 NBM SS, '97 SS
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,161
Quote:
Originally Posted by RuffEL View Post
thanx karma....i appreciate the help....im gonna get the diabolical genious eggheads i know together and we'll put together something that suits my needs....im DEFINATELY leaning towards these DTs tho!
You're welcome.

Feel free to call if you have questions too.

Best of luck!,
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 05-12-2010, 07:32 AM   #75
Edrock

 
Edrock's Avatar
 
Drives: '10 Camaro 2SS LS3
Join Date: Jan 2009
Location: Jamestown, NC
Posts: 964
So whatever happened with the DT Cat-back system? I asked about this earlier in this thread a little over a month ago. Still don't have them yet? Seems like it was always "they should ship next week", then the next week would roll around and I'd call. Guess what I was told. "they should ship next week". After a month or so of that I finally gave up on them and went with something else. They are nice guys and all and make great headers so I don't know what's going on with the catback. All this happened to me last August/September. I see nothing has changed and that I made a good decision to move on. All this time and still not one Camaro5 member has come forth with their DT catback system. Oh well. Would still like to hear a sound clip...if they ever ship and get installed...
__________________
DT Shorties, Solo hi-flow Cats, X-pipe, resonator delete, Flowmaster Super-44s, VMAX TB, Stronger MAF, C.A.I. Intake with race scoop, and JRE Tune!
WOT is my happy place!!
Edrock is offline   Reply With Quote
Old 05-12-2010, 08:06 AM   #76
trudawg660

 
Drives: 2006 Dodge Charger / 2SS IOM
Join Date: Dec 2008
Location: United Kingdom
Posts: 1,640
well I'm one of those lovely people that has paid his money for the exhaust and haven't received it yet. they had some problems with the exhaust tips and then they went to another company and bought some and then they found out those exhaust tips where too long. so I guess they had to cut them and now they are etching them. this conversation happened a month ago and I'm still waiting. if I wasn't deployed I would be really pissed off. the person I bought it from (bad karma's boss) has kept me in the loop and told me he would give me my money back if I wanted it. but I said no I'm in this sandbox for 6 months and I have nothing but time
trudawg660 is offline   Reply With Quote
Old 05-12-2010, 09:28 AM   #77
wbt
Account Suspended
 
Drives: 2010 Challenger R/T;2011 Mustang GT
Join Date: Jan 2010
Location: Texas
Posts: 2,105
I feel the pain you guys have gone through or are going through. I decided to move on myself after being on the backorder list for 30+ days. Same thing happened to me with Pypes. Ordered 2/10 (before I purchased my car) and cancelled in March after 45+ day delay. I researched further and stumbled upon the Cherry Bomb cat-back and couldn't be happier.
wbt is offline   Reply With Quote
Old 05-12-2010, 11:50 AM   #78
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,111
Quote:
Originally Posted by RuffEL View Post
the only kicker to me surely buying these heds is the cats.....i dont want legal issues and i would really kinda like to have an all in one "ENGINEERED that way" system AND keep within the law...and not throw my ECU through a loop (definately want the warranty so im not tuning til its expired).
I'm pretty sure that installing any LT header is going to cause you to get a tune.....DTs included. With LTs your are either moving or removing the Cats which is going to throw an "check engine" code.

On top of that....even if it didn't throw a code you would probably want a tune any way to make sure the Air/Fuel ratio is good. By adding more air you'll need more fuel to not cause the car to run lean. Run it to lean and you'll burn a piston. Take it in for warranty....they see you have headers....even without a tune GM will probably point to the headers for causing it to run lean and thus burn a piston.....and you'll be out the money for an engine rebuild.

Now....I hear the Camaros come pretty rich from the factory so you might get away from the extra air of the headers but personally I wouldn't take that chance.

DT shorties will probably not throw a code and probably won't cause any issues. However...the performance increase is not going to be nearly as much as LTs.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 05-12-2010, 02:08 PM   #79
Ivan @ Southwest Speed
 
Drives: '15 Z06, '01 NBM SS, '97 SS
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,161
Quote:
Originally Posted by Edrock View Post
So whatever happened with the DT Cat-back system? I asked about this earlier in this thread a little over a month ago. Still don't have them yet? Seems like it was always "they should ship next week", then the next week would roll around and I'd call. Guess what I was told. "they should ship next week". After a month or so of that I finally gave up on them and went with something else. They are nice guys and all and make great headers so I don't know what's going on with the catback. All this happened to me last August/September. I see nothing has changed and that I made a good decision to move on. All this time and still not one Camaro5 member has come forth with their DT catback system. Oh well. Would still like to hear a sound clip...if they ever ship and get installed...
Quote:
well I'm one of those lovely people that has paid his money for the exhaust and haven't received it yet. they had some problems with the exhaust tips and then they went to another company and bought some and then they found out those exhaust tips where too long. so I guess they had to cut them and now they are etching them. this conversation happened a month ago and I'm still waiting. if I wasn't deployed I would be really pissed off. the person I bought it from (bad karma's boss) has kept me in the loop and told me he would give me my money back if I wanted it. but I said no I'm in this sandbox for 6 months and I have nothing but time

Quote:
I feel the pain you guys have gone through or are going through. I decided to move on myself after being on the backorder list for 30+ days. Same thing happened to me with Pypes. Ordered 2/10 (before I purchased my car) and cancelled in March after 45+ day delay. I researched further and stumbled upon the Cherry Bomb cat-back and couldn't be happier.
I know that they are closer today then they were yesterday...

Talking with my boss, yes, 15 are supposed to be coming this week to him where they will sent out to all the buyers.

Me included since I was one of the first as well..

Hopefully we can all get these bad boys installed and see what the deal is. I've been waiting and haven't even thought of another setup. Kinda been too busy to be honest but I am going to be getting one of the 15 and I will have a sound clip with it and the Doug Thorley Long Tubes on my car.

Kinda excited to be honest and I hope that it works out here shortly for everyone.

-Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 06-03-2010, 10:37 PM   #80
Infern0
Bring It
 
Infern0's Avatar
 
Drives: In Between
Join Date: Sep 2009
Location: San Antonio, TX
Posts: 2,929
Quote:
Originally Posted by caverman View Post
DT shorties will probably not throw a code and probably won't cause any issues. However...the performance increase is not going to be nearly as much as LTs.
That's not what the numbers a page or two back suggest. What did I miss on the power diff between the LTs and shorties? Without scrolling back I think the diff was 1HP MORE for shorties but less tq....or maybe the other way around...bottom line, not a dramatic difference at all.

I'd be interested to know if there were significant sound differences...?
Infern0 is offline   Reply With Quote
Old 06-04-2010, 01:25 AM   #81
Ivan @ Southwest Speed
 
Drives: '15 Z06, '01 NBM SS, '97 SS
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,161
Quote:
Originally Posted by Infern0 View Post
That's not what the numbers a page or two back suggest. What did I miss on the power diff between the LTs and shorties? Without scrolling back I think the diff was 1HP MORE for shorties but less tq....or maybe the other way around...bottom line, not a dramatic difference at all.

I'd be interested to know if there were significant sound differences...?
I need to update this bad boy....lol

If you're considering spending 500 for Shorties, do yourself the justice and go for the LT's. There is a significant difference in "real world/usable" power between the two. The shorties are great for the emissions folks, but if you don't need them...rule them out. My opinion of course.

There are several different Dyno numbers out there. I've done both locally and have shared that info with those who have asked.

There is a sound difference as well. Below 3700 RPMs, not much...after that, night and day. The LT's sound pick up where the shorties leave off. Definite difference there.

Perhaps we're ready to see what the LT's sound like on a Catback??

Need some daylight and about 20 minutes and I"ll get you guys some video!
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 06-16-2010, 11:35 AM   #82
RuffEL
Semper Fi! Do or DIE!
 
Drives: '10 camaro 1SS, '02 silverado 1500
Join Date: Sep 2009
Location: Schertz actually...
Posts: 301
Installed the LTs and a borla atak system....freakin awesome! I'm about computer illiterate so if someone will walk me through getting a video on here then I'll post it.

I thank you for the deal and all the help Ivan!!
RuffEL is offline   Reply With Quote
Old 06-16-2010, 12:59 PM   #83
GuidosCamaroSS
 
Drives: 2010 Black Camaro SS/RS MTX
Join Date: Jun 2010
Location: Upstate New York
Posts: 107
Quote:
Originally Posted by RuffEL View Post
Installed the LTs and a borla atak system....freakin awesome! I'm about computer illiterate so if someone will walk me through getting a video on here then I'll post it.

I thank you for the deal and all the help Ivan!!

LETS SEE THE VIDEO!!! My borla atak catback will be here tomorrow and Im thinking about the DT LT!! Did you buy any connection pipes or cats? or did u just buy the LT?
GuidosCamaroSS is offline   Reply With Quote
Old 06-16-2010, 03:11 PM   #84
2010SSRSM6


 
2010SSRSM6's Avatar
 
Drives: My wife crazy with my C5 usage.
Join Date: Apr 2009
Location: DFW
Posts: 6,553
I've had my DT LT's in my garage for over a month. I really need to get some time off work so I can get these installed. How long did you guys have them on before you threw a code? Of did you tune right away?
__________________
UNDER CONSTRUCTION......again......
2010SSRSM6 is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Doug Thorley Shorty Headers for 2010 Camaro Installed -WOW! Rallyman6 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 64 03-13-2011 01:36 PM
Doug Thorley Headers DOUG THORLEY HEADERS V8 Bolt-Ons & Tunes 104 08-29-2009 09:28 AM
MATRIX – 24HR REVIEW CAMARO 2SS/RS - NO BS!! Matrix 5th Gen Camaro SS LS LT General Discussions 54 06-14-2009 03:37 PM
5,000 Mile Camaro Review (1LT) Inspector 17 5th Gen Camaro SS LS LT General Discussions 25 05-07-2009 10:20 PM
Camaro5 T-Shirts, Long Sleeve, Sweatshirts, Hoodies FOR SALE!!! (CLOSED) TAG UR IT Camaro5 Store Merchandise 122 03-31-2009 01:06 PM


All times are GMT -5. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.