Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection


Reply
 
Thread Tools
Old 06-04-2010, 12:34 AM   #1
tjk_art
 
Drives: 2010
Join Date: May 2010
Location: US
Posts: 1,661
Best/recommended sealant?

Hey guys. First time detailing my car I want to use a sealant because I heard they really bring out the CGM color and it lasts longer than a wax.

I am by no means a detailing expert.. so I was wondering if you guys could tell me the best sealant to use? Or what product you would recommend.

So far I've heard good things about klasse, meguiars, and mothers, but i have stripes so I have to be careful what I chose. Thanks in advance for any help.
tjk_art is offline   Reply With Quote
Old 06-04-2010, 01:02 AM   #2
EXCALIBER
 
EXCALIBER's Avatar
 
Drives: 2010 2SS/RS.. her name is "Lucille"
Join Date: Apr 2010
Location: Dodge City, Ks.
Posts: 44
just my 2 cents, for what its worth.... I have tried just about everything available in my area over the counter, with poor results. I was about to give up and order the Adams kit, when another old school Bodyman suggested a product called
"Liquid Glass". I followed the directions and three coats later, I was amazed at the gloss, depth and hardness of this product. With wax, a firm finger swipe across the paint would leave scratches/marks. After using the Liquid Glass, the same action left nothing but a smudge from the oils on my skin. No marks,no scratches, nothing!!
I washed her today (after the Warden took her on a 250 mile joy ride) and the front end was covered in bugs of all sizes. most of them just rinsed off before the actual wash. The entire car beaded very well, and it only took 1 towel to dry her off completely. (used to take three) I have never been so impressed with any of the over the counter waxes, polishes, and sealers, until I tried this product.
I will never go back to the other stuff, after what I witnessed with Liquid Glass.
Sorry for the long rant.
Hope this helps.
Take care, and stay safe.

Last edited by EXCALIBER; 06-04-2010 at 11:30 AM.
EXCALIBER is offline   Reply With Quote
Old 06-04-2010, 01:00 PM   #3
PrinzII
Future ZL1 Owner
 
PrinzII's Avatar
 
Drives: 2011 Edge Limited
Join Date: May 2010
Location: Gilbert, AZ
Posts: 171
....has been a Klasse user since 2001. Autoglym is another good one.
PrinzII is offline   Reply With Quote
Old 06-04-2010, 01:22 PM   #4
Mr CLuTcH
Always On Kill!
 
Mr CLuTcH's Avatar
 
Drives: S.I.M. SS
Join Date: Aug 2009
Location: Louisiana
Posts: 780
Alright, since your just starting off, I'm not going to recommend anything expensive but what I am going to do is recommend you a product which produces the same results if not better results which would rival higher expensive waxes. And the name of this wax is Mcguires Next Tech 2.0. Out of all the waxes I've used this has to be one of the best. The amont of depth and clarity it gives your vehicle is ridiculous. It will make the surface of your car like a reflective mirror. It will give your vehicle a clean cut look. And this product can be bought over the counter.

I highly really recommend it. Now remember this, no matter what product you chose, its all in the prep-work to maximize your results. Prep the car correctly and your results will be miraculous. Its ALL in the preparation.
__________________
S.I.M. SS(L99):
*American Racing Headers (LT)
*Magnaflow cat-back competition exhaust
*K&N typhoon CAI
*Aggressive cam.
*Tune
**Result**: 465rwhp/ 447rwtq. Satisfied.
Mr CLuTcH is offline   Reply With Quote
Old 06-05-2010, 03:53 AM   #5
EXCALIBER
 
EXCALIBER's Avatar
 
Drives: 2010 2SS/RS.. her name is "Lucille"
Join Date: Apr 2010
Location: Dodge City, Ks.
Posts: 44
I am curious, Mr. Clutch. When you used the 2.0, what was the ambiant temp?
The reason I ask, is 2.0 was the first thing I tried on mine when I got her back in March. I ended up with a smeared, smudged mess that took me all of 4 hrs, and a dozen towels to get off of the car. I'm not knocking the product, because in hind sight, it may have been too cool and humid to apply it. I was soo furious at the time, I took the product back, and got my money back.
I have had very mediocre success with the Gold class, turtle wax, and mothers.
It just seems that anything with wax takes forever to shine up, and days later, it still smudges.
(Yes, I do like to touch her when I walk by her....I know... weird, but she IS my other woman)

Take care, and stay safe.
EXCALIBER is offline   Reply With Quote
Old 06-05-2010, 09:40 AM   #6
CamaroDreams07


 
CamaroDreams07's Avatar
 
Drives: Slow V6
Join Date: Jun 2009
Location: East Lansing, MI
Posts: 9,361
Quote:
Originally Posted by EXCALIBER View Post
I am curious, Mr. Clutch. When you used the 2.0, what was the ambiant temp?
The reason I ask, is 2.0 was the first thing I tried on mine when I got her back in March. I ended up with a smeared, smudged mess that took me all of 4 hrs, and a dozen towels to get off of the car. I'm not knocking the product, because in hind sight, it may have been too cool and humid to apply it. I was soo furious at the time, I took the product back, and got my money back.
I have had very mediocre success with the Gold class, turtle wax, and mothers.
It just seems that anything with wax takes forever to shine up, and days later, it still smudges.
(Yes, I do like to touch her when I walk by her....I know... weird, but she IS my other woman)

Take care, and stay safe.
I've run into that problem with polymers in cold weather before. They are a PITA to remove. That being said, I will throw my vote in for the NXT 2.0 as well. I just used it this mornign and wow..amazing. If you have a metallic paint, you owe it to yourself to try this stuff. At only $16/bottle, what do you have to lose?
__________________
[B]
CamaroDreams07 is offline   Reply With Quote
Old 06-05-2010, 10:02 AM   #7
PAUL SS
The Mark of Excellence
 
PAUL SS's Avatar
 
Drives: 2010 ABM 1SS RS LS3
Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,688
I used NXT 2.0 in a 65 degree garage and it went on and wiped off very easily. Maybe the key is to clay bar the surface first to make super smooth.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein
PAUL SS is offline   Reply With Quote
Old 06-05-2010, 10:17 AM   #8
CamaroDreams07


 
CamaroDreams07's Avatar
 
Drives: Slow V6
Join Date: Jun 2009
Location: East Lansing, MI
Posts: 9,361
Quote:
Originally Posted by PAUL SS View Post
I used NXT 2.0 in a 65 degree garage and it went on and wiped off very easily. Maybe the key is to clay bar the surface first to make super smooth.
The clay definitely can't hurt, but I think it's the temp. Mine wiped off easy today too, but when I've used polymers in cold weather (40 ish) then it's a whole different animal. Since he said he used his in March, I would assume it was cooler than 65, although I'm not familiar with KC weather.
__________________
[B]
CamaroDreams07 is offline   Reply With Quote
Old 06-05-2010, 11:28 AM   #9
redman
 
Drives: 18 2SS Vert
Join Date: Dec 2009
Location: mi
Posts: 81
I have a CGM and found this to be an excellent treatment. Start with Duragloss 652 then follow with 3 coats of 601/111. When finished with this you can top with 951 for extra gloss and protection if you like.
The results from the above on this color are amazing.
redman is offline   Reply With Quote
Old 06-05-2010, 10:56 PM   #10
EXCALIBER
 
EXCALIBER's Avatar
 
Drives: 2010 2SS/RS.. her name is "Lucille"
Join Date: Apr 2010
Location: Dodge City, Ks.
Posts: 44
I think the temp. MUST HAVE been the main cause for failure with the 2.0
Good info to know.
Given what I've seen with the numerous OTC products, I think I'll stick with the Liquid Glass. I seems to suite my needs perfectly.
But, to each his own!!
Take care, and stay safe.
EXCALIBER is offline   Reply With Quote
Old 06-06-2010, 02:48 AM   #11
Mr CLuTcH
Always On Kill!
 
Mr CLuTcH's Avatar
 
Drives: S.I.M. SS
Join Date: Aug 2009
Location: Louisiana
Posts: 780
Quote:
Originally Posted by EXCALIBER View Post
I am curious, Mr. Clutch. When you used the 2.0, what was the ambiant temp?
The reason I ask, is 2.0 was the first thing I tried on mine when I got her back in March. I ended up with a smeared, smudged mess that took me all of 4 hrs, and a dozen towels to get off of the car. I'm not knocking the product, because in hind sight, it may have been too cool and humid to apply it. I was soo furious at the time, I took the product back, and got my money back.
I have had very mediocre success with the Gold class, turtle wax, and mothers.
It just seems that anything with wax takes forever to shine up, and days later, it still smudges.
(Yes, I do like to touch her when I walk by her....I know... weird, but she IS my other woman)

Take care, and stay safe.
Well, I've used NXT 2.0 in the winter when it was cold enough to freeze my balls off, but as long as you apply the product correct and prep the car correctly, it should come right off. Now, in the winter, it did smear , but that shouldn't stop the removal of the product, just buff it off with some elbow grease. I recently completed a detail tonight, I used NXT 2.0 as my wax when I was done. Check out my thread in a little for the results.
__________________
S.I.M. SS(L99):
*American Racing Headers (LT)
*Magnaflow cat-back competition exhaust
*K&N typhoon CAI
*Aggressive cam.
*Tune
**Result**: 465rwhp/ 447rwtq. Satisfied.
Mr CLuTcH is offline   Reply With Quote
Old 06-06-2010, 03:47 AM   #12
Waco
Layla
 
Waco's Avatar
 
Drives: '10 2SS/RS, LS3, CGM/IO
Join Date: Dec 2009
Location: Newport, RI
Posts: 345
In the last few days I've used Adam's products to clay bar, swirl remove, polish and wax my wife's black car and my Harley (100 anniversary gun metal pearl) and I couldn't be more pleased by the end result. Extremely easy to use and the results were perfect.
Waco is offline   Reply With Quote
Old 06-06-2010, 03:51 AM   #13
Waco
Layla
 
Waco's Avatar
 
Drives: '10 2SS/RS, LS3, CGM/IO
Join Date: Dec 2009
Location: Newport, RI
Posts: 345
Quote:
Originally Posted by Waco View Post
In the last few days I've used Adam's products to clay bar, swirl remove, polish and wax my wife's black car and my Harley (100 anniversary gun metal pearl) and I couldn't be more pleased by the end result. Extremely easy to use and the results were perfect.
I know...
Attached Images
   
Waco is offline   Reply With Quote
Old 06-06-2010, 04:36 AM   #14
EXCALIBER
 
EXCALIBER's Avatar
 
Drives: 2010 2SS/RS.. her name is "Lucille"
Join Date: Apr 2010
Location: Dodge City, Ks.
Posts: 44
Looks really nice!
Like I said, To each his own.
Whatever you prefer, is the best product for you.
I respect everyones opinion and input, it's what makes this forum such a great resource.
Take care, and stay safe.
EXCALIBER is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tire Sealant Kit - Warranty Issues jbreed Wheels and Tires Talk Sponsored by The Tire Rack 38 09-14-2011 02:18 PM
Poorboys EX Sealant w/ Carnauba and Poorboys Spray and Gloss Trial *PICS* g-townmach Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection 0 03-28-2010 11:01 AM
Paint Sealant vs carnuba was amphi Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection 10 03-19-2010 12:24 PM
Sealant with the pump for the run flats trenchdog73 Wheels and Tires Talk Sponsored by The Tire Rack 12 10-22-2009 07:19 PM
tire sealant with TPMS Yellojacket Wheels and Tires Talk Sponsored by The Tire Rack 4 08-05-2009 05:46 PM


All times are GMT -5. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.