LPE Breaks into the 9's with their LS9 Camaro - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

66DeuceLS1 · 07-21-2010, 08:50 PM

Quote:

Originally Posted by ittybittyfds

Whats with the quacking before launch???? Thats wicked....

Its a dual stage rev limiter. They can be configured differently...you can have one RPM limit with clutch pushed in and one for high limit to keep from over reving. The lower limit helps take care of your equipment and provides a consistent launch which really shows in his three runs.

Awesome job LPE.

BTW - I am also interested in the rear end mod list.

jrpxxii · 07-21-2010, 11:43 PM

SS Blue Betty RS, its nice to see a woman driving a 6 speed thats modded. Drive it like you stole it.

PfadtRacing · 07-23-2010, 01:17 PM

Pfadt was thrilled to see this past weekends results and quite frankly, had a bit at stake as well! Lingenfelter turned to Pfadt Race Engineering to develop the only drag specific coilovers on the market. Pfadt has specifically engineered the individual bump/rebound front/rear damming curves, and drag-spcific spring rates, to lower your ETs and produce results on the track. You can see them in action in the video Lingenfelter put together below!

Lingenfelter is a go-fast company, an proves it on the track, just like Pfadt. Congrats Lingenfelter! Times will only get faster from here!

ls7camaro · 07-25-2010, 06:39 PM

What size injectors?

Ryan@Lingenfelter · 08-06-2010, 09:38 AM

Sounds like a "2-step" to me![/QUOTE]

You are correct, this car is equipped with our LNC-002 launch controller with timing retard.

Quote:

Originally Posted by SILVER BULLITT

any one know what else has been done to the car besides motor ? axles , suspension , mini tub ?

The car has a custom 9.5" diff with a billet housing, Drive Shaft Shop heavy duty axles, Pfadt Coilovers, and an LPE/LS9 twin disk clutch.

Quote:

Originally Posted by ls7camaro

What size injectors?

The car has Siemens 72 lbs/hr injectors.

JusticePete · 10-28-2011, 04:06 PM

Hmmmm http://www.semashow.com/press/2011/1...ace-suspension

07-21-2010, 11:43 PM	#44
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	SS Blue Betty RS, its nice to see a woman driving a 6 speed thats modded. Drive it like you stole it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 06:52 PM
Over 230 Satisfied 2010 Camaro Customers! Paddock Chevrolet has 40 in stock NOW	camarojoe	Dealer Camaros for Sale	2	05-24-2010 06:58 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 11:29 PM

07-23-2010, 01:17 PM	#45
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Pfadt was thrilled to see this past weekends results and quite frankly, had a bit at stake as well! Lingenfelter turned to Pfadt Race Engineering to develop the only drag specific coilovers on the market. Pfadt has specifically engineered the individual bump/rebound front/rear damming curves, and drag-spcific spring rates, to lower your ETs and produce results on the track. You can see them in action in the video Lingenfelter put together below! Lingenfelter is a go-fast company, an proves it on the track, just like Pfadt. Congrats Lingenfelter! Times will only get faster from here!

07-25-2010, 06:39 PM	#46
ls7camaro Drives: 2010 camaro Join Date: May 2009 Location: PA Posts: 395	What size injectors?

10-28-2011, 04:06 PM	#48
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,171	Hmmmm http://www.semashow.com/press/2011/1...ace-suspension