Achieving the Camaro concept's afterburner tail light effect - Page 34 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TonyNo · 08-15-2010, 03:09 PM

This is one of the reasons that I did not go to production yet...

In the heat that we had yesterday, one of the assemblies failed. A light module separated from the light housing. Luckily, it was the very first one that I did, so, lesson learned!

I am now a bit closer to proving to myself that these will be made to last.

2SSRS@Gen5diy · 08-15-2010, 05:28 PM

I have run the running light's on for 2 days now to test the same ting the good part is its' 115 out in the Mohave desert no problem at this time.

Synerbee · 08-29-2010, 01:15 AM

Quote:

Originally Posted by TonyNo

This is one of the reasons that I did not go to production yet...

In the heat that we had yesterday, one of the assemblies failed. A light module separated from the light housing. Luckily, it was the very first one that I did, so, lesson learned!

I am now a bit closer to proving to myself that these will be made to last.

I really like these if they go on sale will they be widely avalible or limitrf

TonyNo · 09-01-2010, 07:47 PM

They will be "limited" in as much as not coming from China.

Another piece of the puzzle...

I have solved the fast-flash problem when using LED lights. More later!

Oh, and it's not via power-hungry load resistors either!

Mike2ss · 09-01-2010, 09:32 PM

we are waiting.

2SSRS@Gen5diy · 09-01-2010, 09:40 PM

Here are my lights that i made, But non LED's hope you like them all parts made in house, Stand back or you will get your hair burnt. LOL

Synerbee · 09-03-2010, 11:15 PM

Quote:

Originally Posted by TonyNo

They will be "limited" in as much as not coming from China.

Another piece of the puzzle...

I have solved the fast-flash problem when using LED lights. More later!

Oh, and it's not via power-hungry load resistors either!

Those lights are my top priority so I was seeing if it be good idea to buy asap or wait. I have 75% of getting a Camaro as long as convertible and z28 drop the price of 2LT RS by 6000 by early 2012.

zebra · 09-29-2010, 05:18 PM

gah...
now i'm gonna have to figure out how to make something like this for my car!

Ringo · 11-14-2010, 04:13 AM

Whatever happened to all this? Lots of good looking possibilities, but nothing to make the dream a reality. Anyone? Buehler???

torranosaurus · 11-21-2010, 09:36 PM

Ditto.

2SSRS@Gen5diy · 11-21-2010, 09:39 PM

I an making a set right now for a member.

BrandonB956 · 03-12-2011, 06:00 PM

bump

jcgill · 05-04-2011, 05:22 PM

Quote:

Originally Posted by 2SSRS

I an making a set right now for a member.

how much would a set cost?

Ringo · 05-04-2011, 11:38 PM

How do we get in line?

08-15-2010, 03:09 PM	#463
TonyNo Drives: 2016 2SS, SW Join Date: Oct 2009 Location: Chicago Suburbs Posts: 1,079	This is one of the reasons that I did not go to production yet... In the heat that we had yesterday, one of the assemblies failed. A light module separated from the light housing. Luckily, it was the very first one that I did, so, lesson learned! I am now a bit closer to proving to myself that these will be made to last. __________________

09-01-2010, 07:47 PM	#466
TonyNo Drives: 2016 2SS, SW Join Date: Oct 2009 Location: Chicago Suburbs Posts: 1,079	They will be "limited" in as much as not coming from China. Another piece of the puzzle... I have solved the fast-flash problem when using LED lights. More later! Oh, and it's not via power-hungry load resistors either! __________________

09-01-2010, 09:32 PM	#467
Mike2ss Airborne Pathfinder Drives: Camaro ZL575 Join Date: Nov 2009 Location: San Benito, TX Posts: 1,139	we are waiting. __________________ 2010 Camaro Indy 500 Pace car, LS3-ZL575 Other cars are- 95 BMW 325 sedan- AA exhaust, AA CAI, AA Strut bar, AA chip, M3 rotors and calipers, racing clutch, oversized injectors, upgraded M3 interior- Audi A4 SLine, with black out optics

09-01-2010, 09:40 PM	#468
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Here are my lights that i made, But non LED's hope you like them all parts made in house, Stand back or you will get your hair burnt. LOL Attached Images

09-29-2010, 05:18 PM	#470
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 10,625 View My Garage	gah... now i'm gonna have to figure out how to make something like this for my car! __________________ Eve ('00 FRC): hot-air intake Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408

08-15-2010, 05:28 PM	#464
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	I have run the running light's on for 2 days now to test the same ting the good part is its' 115 out in the Mohave desert no problem at this time.

11-14-2010, 04:13 AM	#471
Ringo Politically incorrect Drives: 2SS/RS Join Date: Jun 2009 Location: Soggy Seattle Posts: 782	Whatever happened to all this? Lots of good looking possibilities, but nothing to make the dream a reality. Anyone? Buehler??? __________________ 2SS/RS M6 IO interior. Built 8/14/09. Delivered 9/9/09.

11-21-2010, 09:36 PM	#472
torranosaurus Banned Drives: 2010 orange 2SS Join Date: Mar 2010 Location: USA Posts: 166 View My Garage	Ditto.

11-21-2010, 09:39 PM	#473
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	I an making a set right now for a member.

03-12-2011, 06:00 PM	#474
BrandonB956 Drives: RS (11/15/10) Join Date: Mar 2010 Location: Baton Rouge,LA Posts: 574	bump __________________ *TEAM LLT* Nov.15th 2010 -- Check out my build thread http://www.camaro5.com/forums/showthread.php?t=116235

05-04-2011, 11:38 PM	#476
Ringo Politically incorrect Drives: 2SS/RS Join Date: Jun 2009 Location: Soggy Seattle Posts: 782	How do we get in line? __________________ 2SS/RS M6 IO interior. Built 8/14/09. Delivered 9/9/09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Exterior Parts & Accessories	30	02-20-2013 03:23 PM
Drag Racing Suspension Kits	Info@PeddersUSA.com	Suspension / Chassis / Brakes	25	02-21-2010 08:48 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM