Lingenfelter Performance Engineering Customers - Page 293 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JusticePete · 08-18-2010, 02:26 PM

I thought this might be of ineterst to this group.

http://www.camaro5.com/forums/showthread.php?t=91450

We have selected a winner. It is Graham Behan at LPE. Drag racing is a core competency at LPE. They have a ridiculous car that needs to hook better. We determined they would be an excellent partner to see how the Supercar Coilovers perform at the drag strip with good data collection.

That is a very different direction than where we started. Here is a list of EVERYONE that has posted in the thread making them eligible for a consolation prize.

blufin
danhr
Fishdaddy
flyby
garagelogic
GQ4Life
Grand Pa
Malice
MisterCamaro69
mrray13
Orange5thGen
OrangeChevyII
Ovenmitt
Paul2010
Sam88gta1
Supercharged SS
TC
The_Blur
WongBob

Please choose ONE of the following consolation prizes.

$1,000 off the purchase of Pedders Supercar Coilovers
$500 off the purchase of Pedders Xa Coilovers
15% off the purchase of any Pedders Camaro Bit

Have them installed at a Pedders Specialist Shop and Pedders will pay up to $150 of your installation bill.

FINE PRINT

The order must be placed via email to Jacie@PeddersUSA.com with a delivery time stamp of no later than 07:00 AM Monday, August 23, 2010

Thank you ALL for Posting!!!!

*radz28* · 08-18-2010, 03:20 PM

Quote:

Originally Posted by Blue70SS

Not quite sure what's going on, but already commented on this and someone's deleting my posts again (feeling like an outlaw that never had a gun!)

Speed - you might want to check your upper control arm above the CV shaft for signs of the HD CV shaft bolts hitting. You'll see a "V" notch about 3/16" if like mine. Mine hit once while entering a parking lot with noticable dip at very low speed - but rear was lowered ~1 1/4", Pfadt coilovers were set at 12, and I had 2 adult passengers. The "V" notch was just inboard from the CV shaft bolts and on the trailing edge. It sounded as if the car bottomed out when it happened (both sides). Didn't seem to hurt anything other than the small "V" - but raised car up 1/2" and hasn't happened since. Also, I can't help but wonder if the increased angle on the CV shaft from lowering, could possibly put more stress on the CV shaft. I would ask you what code you set off, but maybe that's why the post was deleted??? But please PM me - curious.
(moderators....if I'm doing something wrong, please PM me!)

I'm sorry about this, but I've looked through the last few pages and see no deleted posts for anyone... I don't know why this is happening...

Quote:

Originally Posted by JusticePete

I thought this might be of ineterst to this group.

http://www.camaro5.com/forums/showthread.php?t=91450

We have selected a winner. It is Graham Behan at LPE. Drag racing is a core competency at LPE. They have a ridiculous car that needs to hook better. We determined they would be an excellent partner to see how the Supercar Coilovers perform at the drag strip with good data collection.

That is a very different direction than where we started. Here is a list of EVERYONE that has posted in the thread making them eligible for a consolation prize.

blufin
danhr
Fishdaddy
flyby
garagelogic
GQ4Life
Grand Pa
Malice
MisterCamaro69
mrray13
Orange5thGen
OrangeChevyII
Ovenmitt
Paul2010
Sam88gta1
Supercharged SS
TC
The_Blur
WongBob

Please choose ONE of the following consolation prizes.

$1,000 off the purchase of Pedders Supercar Coilovers
$500 off the purchase of Pedders Xa Coilovers
15% off the purchase of any Pedders Camaro Bit

Have them installed at a Pedders Specialist Shop and Pedders will pay up to $150 of your installation bill.

FINE PRINT

The order must be placed via email to Jacie@PeddersUSA.com with a delivery time stamp of no later than 07:00 AM Monday, August 23, 2010

Thank you ALL for Posting!!!!

2010 BADSS · 08-18-2010, 11:57 PM

Congratulations to Graham, LPE, and that amazing LS9 car.

mws444 · 08-19-2010, 07:09 AM

OOOOOOOOOO Graham is going Pedders!!!

Too Cool!

I want to see a new thread on this one!!!
Lets see those times drop!!

600hp-lpe · 08-19-2010, 10:21 AM

The whole WORLD should use Pedders... they ROCK!

Pete, got any plans for Pedderizing a 3500 Hd Silverado Pickup? J/K

I'm waiting to order a Pedderized Corvette track kit...
if you need an Alpha or Beta test vette give me a call.

JusticePete · 08-19-2010, 11:21 AM

Quote:

Originally Posted by 600hp-lpe

The whole WORLD should use Pedders... they ROCK!

Pete, got any plans for Pedderizing a 3500 Hd Silverado Pickup? J/K

I'm waiting to order a Pedderized Corvette track kit...
if you need an Alpha or Beta test vette give me a call.

I do have 3500 Gas Sports Ryder shock samples that should fit your GMT900. What year is it?

Speed74SS · 08-19-2010, 12:05 PM

Quote:

Originally Posted by 600hp-lpe

The whole WORLD should use Pedders... they ROCK!

Pete, got any plans for Pedderizing a 3500 Hd Silverado Pickup? J/K

I'm waiting to order a Pedderized Corvette track kit...
if you need an Alpha or Beta test vette give me a call.

600 - You have a vette as well?? Let's see it - spill it

600hp-lpe · 08-19-2010, 01:06 PM

Quote:

Originally Posted by Speed74SS

600 - You have a vette as well?? Let's see it - spill it

It's next on my list of toy purchases... If Pete/Pedders makes a kit for the vette i'll buy a new one immediately.

I miss not owning a Vette. :(

I'll have one as soon as I pay off the 2010 Camaro - I owe less than 6K on the Camaro, so a Vette will probably be in the garage in the spring. I have a parking place right next to the Camaro for it.

The tractor will need to go somewhere else....

600hp-lpe · 08-19-2010, 01:09 PM

Quote:

Originally Posted by JusticePete

I do have 3500 Gas Sports Ryder shock samples that should fit your GMT900. What year is it?

My truck is a 2008 Chevy Silverado 3500 Dually with the extended cab.

What's a GMT900?

Speed74SS · 08-19-2010, 01:30 PM

Quote:

Originally Posted by 600hp-lpe

It's next on my list of toy purchases... If Pete/Pedders makes a kit for the vette i'll buy a new one immediately.

I miss not owning a Vette. :(

I'll have one as soon as I pay off the 2010 Camaro - I owe less than 6K on the Camaro, so a Vette will probably be in the garage in the spring. I have a parking place right next to the Camaro for it.

The tractor will need to go somewhere else....

Awesome!! I will have a Z06 sometime in the future and it will be getting an LPE package also. I would love to have one to keep the Camaro company. I can't cause my wife another heart attack anytime soon though, so it might be a little while

JusticePete · 08-19-2010, 03:31 PM

Quote:

Originally Posted by 600hp-lpe

My truck is a 2008 Chevy Silverado 3500 Dually with the extended cab.

What's a GMT900?

That is your truck's chassis code. The previous version was a GMT800. We use chasis codes to confirm fitmenst as opposed to models internally. What I have will fit. Do you have the ability to bolt these on your truck?

600hp-lpe · 08-19-2010, 04:26 PM

Quote:

Originally Posted by JusticePete

That is your truck's chassis code. The previous version was a GMT800. We use chasis codes to confirm fitmenst as opposed to models internally. What I have will fit. Do you have the ability to bolt these on your truck?

Yes, I do. I will send you a PM.

JusticePete · 08-19-2010, 06:17 PM

Quote:

Originally Posted by 600hp-lpe

Yes, I do. I will send you a PM.

Excellant. This is a good opportunity to get a customer's opinion on pre-production set of Pedders HD rear shocks. I have you PM and will follow up with you. Please also PM your email address please.

600hp-lpe · 08-19-2010, 06:26 PM

Hi Pete, I just PM'd you (again) with my email address.

-Dan

08-18-2010, 02:26 PM	#4089
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,171	I thought this might be of ineterst to this group. http://www.camaro5.com/forums/showthread.php?t=91450 We have selected a winner. It is Graham Behan at LPE. Drag racing is a core competency at LPE. They have a ridiculous car that needs to hook better. We determined they would be an excellent partner to see how the Supercar Coilovers perform at the drag strip with good data collection. That is a very different direction than where we started. Here is a list of EVERYONE that has posted in the thread making them eligible for a consolation prize. blufin danhr Fishdaddy flyby garagelogic GQ4Life Grand Pa Malice MisterCamaro69 mrray13 Orange5thGen OrangeChevyII Ovenmitt Paul2010 Sam88gta1 Supercharged SS TC The_Blur WongBob Please choose ONE of the following consolation prizes. $1,000 off the purchase of Pedders Supercar Coilovers $500 off the purchase of Pedders Xa Coilovers 15% off the purchase of any Pedders Camaro Bit Have them installed at a Pedders Specialist Shop and Pedders will pay up to $150 of your installation bill. FINE PRINT The order must be placed via email to Jacie@PeddersUSA.com with a delivery time stamp of no later than 07:00 AM Monday, August 23, 2010 Thank you ALL for Posting!!!!

08-18-2010, 11:57 PM	#4091
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	Congratulations to Graham, LPE, and that amazing LS9 car. __________________ LPE 650 BHP package Dual disc clutch set Borla catback exhaust-S type DSS 9" rear with 3.90 gear Pfadt suspension/Hotchkiss chassis brace Forgeline Wheels VR3S/Nitto tires Beware of the LPE Sisterhood

08-19-2010, 07:09 AM	#4092
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	OOOOOOOOOO Graham is going Pedders!!! Too Cool! I want to see a new thread on this one!!! Lets see those times drop!! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

08-19-2010, 10:21 AM	#4093
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	The whole WORLD should use Pedders... they ROCK! Pete, got any plans for Pedderizing a 3500 Hd Silverado Pickup? J/K I'm waiting to order a Pedderized Corvette track kit... if you need an Alpha or Beta test vette give me a call.

08-19-2010, 06:26 PM	#4102
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Hi Pete, I just PM'd you (again) with my email address. -Dan