09-06-2010, 03:32 PM | #1 |
as in Irish European
|
IT'S ALL YOUR FAULT!!!!
If it wasn't for you lot I'd be happily driving around in a factory spec SS/RS and none the wiser to what changes I could make.
However now because of you, I not only knew what could be done, but how to do it. Because of you I have found myself under a car at 1am. I hope you feel guilty. Here's a list and some photos of what you made me do List of Mods includes Stillen Front Splitter - http://www.stillen.com/product.asp?i...T&model=CAMARO Window Tint - Sides and Rear to GA legal limit. Excellent work by the guys at http://soundproconyers.com/ GMPP exhaust - http://www.gmpartsdirect.com/results...umber=92206992 Installed by service shop at John Miles Chevy SLP Spoiler - http://www.slponline.com/view_product.asp?P=100041 Expertly painted by Rod Fathers in Conyers http://www.rodfatherscandc.com/ Barton Short Shifter - http://www.bartonindustries.com/BUY-...ter---Acc.html Pfadt Sport Suspension Package http://www.pfadtracing.com/catalog/p...roducts_id/180 Purchased and Professionally Installed @ Vengeance Racing http://www.vengeancerd.com/ Airaid CAI - http://www.magnaflowplus.com/showite...ntake%20System Center Cap Overlays - http://www.thestickerwitch.com/ Chevrolet Sill Overlays - http://www.thestickerwitch.com/ V8 Engine Cover Overlay - http://www.thestickerwitch.com/ Red Engine Cover - http://gmaccessoriesstore.com/images...ne%20cover.JPG purchased from John Miles Chevy Thin Vent Gills - http://www.thestickerwitch.com/ DRL Fog Light Harness - http://www.adaptiveperformance.com/camarodrl.htm Skip Shift Eliminator Harness - http://www.adaptiveperformance.com/SKIPSHIFT.htm G2 Brake Caliper Paint Kit - http://www.eagleday.com/brcapaki.html Brembo Hi-Temp Silver Decals - http://stores.ebay.com/dindecal LED Flog Light Bulbs - http://www.automotivelightstore.com/P13W.aspx Red Bow Tie Floor Mats - http://www.lloydmats.com/images/819185_BOWTIE-RED.jpg Camaro SS License Frame Holder - http://www.chevymall.com/All-New-Cam...info/GC707-70/ In truth I had considered the 21" wheel option but I thought there was more I could do with $5000. So far my mods have cost under $4400. Think I could get a supercharger for $600? Joking aside thanks to all the folks on here who have helped preparing DIY guides. Here are some of the Mod Installation & Discussion Links I have used. DRL Fog Light Harness - http://www.camaro5.com/forums/showth...harness&page=5 Skip Shift Eliminator Harness - http://www.camaro5.com/forums/showth...P+SHIFT&page=2 G2 Brake Caliper Paint Kit - http://www.camaro5.com/forums/showth...alipers&page=2 Barton Shifter Install - http://www.camaro5.com/forums/showthread.php?t=53823 And http://www.camaro5.com/forums/showpo...3&postcount=14 Airaid CAI - http://www.camaro5.com/forums/showthread.php?t=38286
__________________
Last edited by dirishboy; 09-07-2010 at 10:20 PM. |
09-06-2010, 03:44 PM | #2 |
Unofficial Glass Tech
|
i think it looks good, but i wouldn't have spent $4400 and only got an intake and exhaust... IMHO, after spending all that money and still can be beat by a stock 11 GT would upset me...
|
09-06-2010, 04:26 PM | #3 |
Drives: 2010 Camaro 1SS Join Date: Jun 2010
Location: San Diego
Posts: 177
|
Looks great! Very tastefull and the shine on the paint is killer. Good job. The car looks very classy. Now, let the performance mods begin!
|
09-06-2010, 04:29 PM | #4 |
Account Suspended
|
At least you can not blame me for anything...LOL
|
09-06-2010, 04:48 PM | #5 | |
as in Irish European
|
Quote:
Of course there is also the fact that I was faster than all the GTs for a year before the 11 GT came along
__________________
|
|
09-06-2010, 05:39 PM | #6 |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Looks really good, keep the mods coming!
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
09-06-2010, 05:59 PM | #7 |
as in Irish European
|
Thanks Spymaster. Coming from you that means a lot.
For anyone interested in more of my attempts at good photography you can see them in my album at http://www.camaro5.com/forums/album.php?albumid=516
__________________
|
09-06-2010, 06:13 PM | #8 | |
Unofficial Glass Tech
|
Quote:
|
|
09-06-2010, 06:51 PM | #9 |
Black Ice
Drives: 2SS/RS Black w/ silver ice stripes Join Date: Jul 2009
Location: Pueblo,Co.
Posts: 898
|
I like it. Real clean look and sharp.
__________________
|
09-06-2010, 07:46 PM | #10 |
Drives: 2010 Camaro SS/RS Join Date: Oct 2009
Location: Lincoln Nebraska
Posts: 1,754
|
did you have to remove the front bumper to put on the splitter? It looks great.....what is your impression of it?
__________________
2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.
|
09-06-2010, 07:50 PM | #11 |
|
looks great
__________________
Jannetty Racing JRE Street Package
|
09-06-2010, 08:26 PM | #12 | |
as in Irish European
|
Quote:
I didn't have to remove it. There is nothing you have to do from inside the bumper so I don't know why they suggest that other than make it easier to work on. Raise the car and then get a couple of friends to hold the splitter in place while you secure the center screws from below (15 mins work with most of that being sure, sure and absolutely sure you have it in the right place. Then they can leave and you can peel the adhesive liner off each side and bond it in place. My only complaint would be that I would like the contour on the top of the three center struts to better match that of the bottom suface of the bumper. You end up with a very slight gap that I see every time I lay my head flat on the ground in front of my car.................In other words I'm the only person who notices
__________________
|
|
09-06-2010, 08:46 PM | #13 |
Drives: 2010 Camaro SS/RS Join Date: Oct 2009
Location: Lincoln Nebraska
Posts: 1,754
|
thanks man!
__________________
2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.
|
09-06-2010, 08:49 PM | #14 |
|
man....you need to get a life!!! LOL
__________________
Sleep well America.....my MARINE has your back......
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Who's fault is it? | cyber_satan | Off-topic Discussions | 45 | 08-31-2010 03:07 PM |
Whose fault is it? | Tx1Lt | 5th Gen Camaro SS LS LT General Discussions | 76 | 03-05-2010 06:27 PM |
Fault Code P2A01??? | franknbeans | 5th Gen Camaro SS LS LT General Discussions | 3 | 01-24-2010 03:44 PM |
Want to install Recarro Race Seats what about SRS fault from removing stock seat? | 55Designs | 5th Gen Camaro SS LS LT General Discussions | 0 | 12-08-2009 03:10 PM |
Finally did it all Camaro 5's fault | 01pewterz28 | 5th Gen Camaro SS LS LT General Discussions | 5 | 10-02-2009 01:12 PM |