![]() |
|
|
#85 |
|
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
Not always true. My dad is a victim of one of the larger sponsoring vendors on that site and after a lot of investigation I found out that they continually deleted threads that called this vendor out. Their next step was banning the members that spoke out against the vendor.
On another note, I just recently had a real costly experience with a paid vendor on LS1tech. That is not where I found them, but in the end I’m out over $2k and they deny any liability. This is after I had a third party inspect the work.
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd Last edited by McBeevee; 09-16-2010 at 12:21 PM. Reason: wanted to add more.... |
|
|
|
|
#86 | |
![]() Drives: 5.3 ls based 89 gmc 1500 sierra Join Date: Aug 2010
Location: DFW
Posts: 27
|
Quote:
very well put people need to be informed when stuff like this happens so that they do not fall victim to the same thing |
|
|
|
|
|
#87 |
|
Speed Racer
|
I have a Appointment with ADM for November 6th... My Car was tuned by a local shop here in OKC and it is way off the Mark... I just had a Maggie installed and he was only able to get 390 RWHP.. That is only a 60 RWHP gain for $7000.. WTF !!!
I am going to drive 3 hours to get to ADM and I am sure they will get it all corrected and get me closer to 450 RWHP like Magnuson states it should be.. Even without headers..... |
|
|
|
|
#88 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 1SS Join Date: Aug 2009
Location: Lawton/Fort Sill, OK
Posts: 1,632
|
Who did you go to in OKC. I know of only one shop who works on Camaro's and was leery of having him install anything after visiting the shop.
__________________
2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB
|
|
|
|
|
#89 |
|
Speed Racer
|
I hate to give out the name of the shop at this point... As of tonight I have e-mailed him requesting my $300 back.... Depending on his response, I will let you guys all know...
He better do the right thing, if he wants to have a decent rep in OKC. |
|
|
|
|
#90 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Who ever it is....it's probably worth the drive to come down to ADM in Lewisville and get it done right the first time.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal ![]() |
|
|
|
|
#91 |
![]() ![]() Drives: Silver SS/RS, Man 6 Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
|
Speed Racer - You found the problem with using a dealer to do this install. Did you ask how many Maggies they have installed and how successful were they and did you get owners recomendation?? Like geting an invasive medical procedure you would do your due dilligence first. At least you realize where you should have gone for your Maggie install. I think it is comendable for ADM to take you in, especially as you did not buy from him in the first place. Inheriting someone else's botched work can be risky too. Did you ask bout having a Maggie installed awhile back on this forum? If you had you would have heard rave reviews about ADM and none bout using an OKC dealer. Just my 2 cents. You are one of many and thanks for maning up to your problem as your experience will help many other forum members.
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears |
|
|
|
|
#92 |
|
Speed Racer
|
The dealer that installed it has done many superchargers.. I know the Chevy dealership owner and they do superchargers all the time onCamaro's Corvette's, etc... They also sell and work on the SLP Supercharged Camaros..... The car ran great after the dealer gave it to me with the stock maggie tune... It was when I went to the Local race tuner here in okc that things went wrong( In My Opinion). I hope I'm not wishing for more RWHP that is not even possible...
Maybe my local tuner did do it right? I'm just not sure since all I am getting is 390 RWHP.... My thoughts are that a $6000 Supercharger should have gained me alot more than 60 RWHP....... I don't think their is anything wrong with the install or the supercharger.. It just needs a Tuner that knows how to get all the HP out of her...... |
|
|
|
|
#93 |
![]() ![]() Drives: Silver SS/RS, Man 6 Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
|
I don't think their is anything wrong with the install or the supercharger.. It just needs a Tuner that knows how to get all the HP out of her......[/QUOTE]
Thanks for the update, at least they got the blower on the car correctly if they have done others. So, you are off the hook for due dilligence. Sorry this had to happen to you and I am sure you will reap some benefits from ADM. Stuff happens. Good Luck.
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears |
|
|
|
|
#94 |
|
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,407
|
|
|
|
|
|
#95 |
|
Speed Racer
|
Hey Guys,
Thanks for all your help.. I can't wait to meet Andy next Saturday and get this car back to where is should be.. I am having withdraws from STOMPING on Her.. This car is not meant to be driving around like a Grandma on Sunday..LOL I took the car to get it cleaned up before Andy works on her next weekend, and BAM the damn check engine light came on.. It is telling me that bank # 2 is running Lean... I am hoping that it is just because I cut out the rear CAT's before I went to ADM...Waiting these last two weeks to get to ADM has been killing me.. This I my daily driver.. All I know is that, when I leave Andy's shop Next Saturday..... I am going to light up the tires and see what this Supercharger can do....
__________________
Supercharged 2010 Camaro SS/RS ---- TVS 2300 Maggie, Hotchkis Track Pack, ADM Race CAI Intake ADM Race Scoop, Flowmaster American Thunder exhaust, Oil catch can, SLP badges & Spoiler, 1/4 mile in 12.138 seconds @ 117 MPH. No Headers, No Cam
Last edited by speed racer; 10-31-2010 at 09:50 AM. |
|
|
|
|
#96 |
|
Speed Racer
|
After many E-mails to the OKC tuner, and after even offering to pay for some of his time and asking for just a partial refund... He has stop responding...
I guess He figure business will just go on like normal...Surprise!!!!!!! Not when you have mad unhappy customers...I try to never bad mouth people, but I have lots of fellow Camaro Owners from around here and other members of OKCCAMAROs.COM and I would hate for anyone else to get bad Customer service or bad Service in general... The name of the shop is XP RACING in OKC..... Just be Be careful
__________________
Supercharged 2010 Camaro SS/RS ---- TVS 2300 Maggie, Hotchkis Track Pack, ADM Race CAI Intake ADM Race Scoop, Flowmaster American Thunder exhaust, Oil catch can, SLP badges & Spoiler, 1/4 mile in 12.138 seconds @ 117 MPH. No Headers, No Cam
Last edited by speed racer; 10-31-2010 at 10:07 AM. |
|
|
|
|
#97 |
![]() Drives: 2010 Black on Black Join Date: Oct 2010
Location: Houston, TX
Posts: 533
|
Please file bbb complaints against bad shops. I always look there before taking my car.
|
|
|
|
|
#98 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Quote:
The wife wanted to drive it that night so I only got a couple runs in. She did good for the first time in the car. She cut a smoking good light for her first time out in about 10 yrs (I think it was a .1200 range). I think a few people were surprised that my 5'4" buck of five wife can race a manual car right along with everyone else. Now I'm having to start rebuilding the mod fund so I can do a Cam or Gears in the next year or so.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal ![]() |
|
|
|
|
|
|
|
![]() |
| Tags |
| dallas, extreme horsepower, fort worth, watch out of them |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Torq - South Florida's #1 Camaro Destination - ONE STOP SHOP | Meister@Torq | USA - Southeast | 22 | 02-26-2018 05:13 PM |
| Modification / Tuning Shops near YOU!!! | The 2010 Sin | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 75 | 09-10-2010 06:15 PM |
| 4th Annual GM Performance Parts LSX Shootout!! | nmcajeff | Dragstrip and Launch Techniques Discussion | 3 | 07-30-2010 01:05 PM |
| Good Audio Shop in DFW? | CamaroDreams07 | USA - Texas | 3 | 04-15-2010 01:48 PM |
| Performance shop CT servicing Northeast | addictedtoboost | V8 Bolt-Ons & Tunes | 1 | 07-24-2009 07:29 AM |