tire help/ 22in - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

COR Forged · 09-16-2010, 11:50 AM

Mike..... Your wheels are coming along great you should be seeing them next week

mikepage0007 · 09-16-2010, 06:53 PM

i, see... well heres some wheel porn...

turborenegade · 09-16-2010, 07:17 PM

hello mike. i have the 315/30 for mine mounted on asanti forged 11''. i bought 4 and used 2 of them. i still have 2, a lot of people on this forum are running 305/30 or the 315/25 pirelli. and pirelli specs on them are overall height is 30'' for the 305. the 315 is yokohama and the overall height on it is 29.5 you can go to tirerack and verify these specs.these both mounted side by side are nearly the same height. the yokohama is 1/4 taller and a lot wider than the 305 pirelli, you couldnt ask for a tire thats fit the 11'' incher better.

mikepage0007 · 09-16-2010, 07:34 PM

yeah, after doing some research , i was trying to keep rear tires close to same height as front{265x30x22} which is 28.25 tall...i ended up going pzero as the 315x25x22 was 28.20 tall..the 30 profiles were more than an inch different..plus my wheel builder said i may rub..i looked @ the yoko,s though and they had a lot of complaints on noise as they wore, how they doing on your car...the toyos had decent reviews. thanks

turborenegade · 09-16-2010, 07:43 PM

hey mike. my car is only 1 week old today. i put my wheels on to look at them a few days ago and took a couple of pictures. i put the stock back on till i get through with a little more of the break in. i never drove it with my new set up. any way i wanted to get use to the 20'' ride so i could tell the difference when i go with my 22s.

ZX1truth · 09-16-2010, 08:05 PM

Hey guys, I'm trying to make my tire choice with black stock 20" rims in front then get the factory replica's in 22" and have them widened to 11" for 315's in the back. Kinda like the staggered diameters on the Vette. I thought it would give my SS a meaner looking stance.
Is this a bad idea?

turborenegade · 09-16-2010, 08:17 PM

no thats not a bad idea. i thought about that myself before ordering the ones i currently have. the 11s i have for the back of mine are very close to the inner wheelhouse. the only thing i would check is the replica ss wheels already have a big backspace on the 10 incher. just make sure it will work with 1'' more on the backside.

ZX1truth · 09-16-2010, 08:31 PM

Yeah...that is my fear....the offset! I know that ADMPerformance sells the 20" widened stock rims for 315 tires BUT they use a wheel spacer to make it work. That suggests to me that you need to move the wheel out a little bit to let it clear the inside of the wheel well. BUT then you can't lower the car because "I would think" it would hit the outside wheel well lip! And I don't want that! I want it to tuck!!!!!

ADM 315 thread
http://www.camaro5.com/forums/showthread.php?t=24905

NewGen · 09-17-2010, 09:28 AM

Quote:

Originally Posted by seddon

Nineball I beg to differ. With my D2's and pedders Xa it is very very very close to stock ride. My wife says it softer than stock.

Mikepage go with the 315/25 with the pedders Xa I have the front dropped all the way down and the rears about 1.5 and she rides nice.

Nice Car

09-16-2010, 06:53 PM	#16
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	i, see... well heres some wheel porn... Attached Images __________________

09-16-2010, 07:17 PM	#17
turborenegade Drives: 2011 2SS RS LS3 M6 Join Date: Aug 2010 Location: georgia Posts: 100	hello mike. i have the 315/30 for mine mounted on asanti forged 11''. i bought 4 and used 2 of them. i still have 2, a lot of people on this forum are running 305/30 or the 315/25 pirelli. and pirelli specs on them are overall height is 30'' for the 305. the 315 is yokohama and the overall height on it is 29.5 you can go to tirerack and verify these specs.these both mounted side by side are nearly the same height. the yokohama is 1/4 taller and a lot wider than the 305 pirelli, you couldnt ask for a tire thats fit the 11'' incher better. Attached Images

09-16-2010, 07:34 PM	#18
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	yeah, after doing some research , i was trying to keep rear tires close to same height as front{265x30x22} which is 28.25 tall...i ended up going pzero as the 315x25x22 was 28.20 tall..the 30 profiles were more than an inch different..plus my wheel builder said i may rub..i looked @ the yoko,s though and they had a lot of complaints on noise as they wore, how they doing on your car...the toyos had decent reviews. thanks __________________

09-16-2010, 08:05 PM	#20
ZX1truth Drives: 2010 2SS/RS Join Date: May 2010 Location: USA Posts: 592	Hey guys, I'm trying to make my tire choice with black stock 20" rims in front then get the factory replica's in 22" and have them widened to 11" for 315's in the back. Kinda like the staggered diameters on the Vette. I thought it would give my SS a meaner looking stance. Is this a bad idea? __________________ LME built LSX427 w/t all Callies internals\| AGP 65/65 TT \| Holley Sniper Intake \| Brodix BR3/LME custom ported \| LME custom cam \| Pro EFI 112 ECU \| ID-1700x \| NGK BR7EF \| AGP's-Fore Triple Fuel pump \| Monster LT1-S Triple \| ZL1 3.23 diff, CF driveshaft, ZL1 axles \| Hurst Line Lock \| MGW Retro Short Throw \| Pfadt solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Ground Control camber/caster plates \| Accelerated Racing Solutions tuned\| God is too good! I don't deserve it, but I sure will accept it!!!

09-16-2010, 08:31 PM	#22
ZX1truth Drives: 2010 2SS/RS Join Date: May 2010 Location: USA Posts: 592	Yeah...that is my fear....the offset! I know that ADMPerformance sells the 20" widened stock rims for 315 tires BUT they use a wheel spacer to make it work. That suggests to me that you need to move the wheel out a little bit to let it clear the inside of the wheel well. BUT then you can't lower the car because "I would think" it would hit the outside wheel well lip! And I don't want that! I want it to tuck!!!!! ADM 315 thread http://www.camaro5.com/forums/showthread.php?t=24905 __________________ LME built LSX427 w/t all Callies internals\| AGP 65/65 TT \| Holley Sniper Intake \| Brodix BR3/LME custom ported \| LME custom cam \| Pro EFI 112 ECU \| ID-1700x \| NGK BR7EF \| AGP's-Fore Triple Fuel pump \| Monster LT1-S Triple \| ZL1 3.23 diff, CF driveshaft, ZL1 axles \| Hurst Line Lock \| MGW Retro Short Throw \| Pfadt solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Ground Control camber/caster plates \| Accelerated Racing Solutions tuned\| God is too good! I don't deserve it, but I sure will accept it!!!

09-16-2010, 11:50 AM	#15
COR Forged Drives: SS Join Date: Jun 2009 Location: Miami, FL Posts: 383	Mike..... Your wheels are coming along great you should be seeing them next week

09-16-2010, 07:43 PM	#19
turborenegade Drives: 2011 2SS RS LS3 M6 Join Date: Aug 2010 Location: georgia Posts: 100	hey mike. my car is only 1 week old today. i put my wheels on to look at them a few days ago and took a couple of pictures. i put the stock back on till i get through with a little more of the break in. i never drove it with my new set up. any way i wanted to get use to the 20'' ride so i could tell the difference when i go with my 22s.

09-16-2010, 08:17 PM	#21
turborenegade Drives: 2011 2SS RS LS3 M6 Join Date: Aug 2010 Location: georgia Posts: 100	no thats not a bad idea. i thought about that myself before ordering the ones i currently have. the 11s i have for the back of mine are very close to the inner wheelhouse. the only thing i would check is the replica ss wheels already have a big backspace on the 10 incher. just make sure it will work with 1'' more on the backside.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire Sealant Kit - Warranty Issues	jbreed	Wheels and Tires Talk Sponsored by The Tire Rack	38	09-14-2011 03:18 PM
Reccomendation on Road coarse/Autocross Tires	michael's maro	Wheels and Tires Talk Sponsored by The Tire Rack	21	09-06-2010 06:52 PM
Exhaust bolt in tire = bad day	GPD151	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	3	07-30-2010 12:56 AM
Are they rims or are they wheels??	topgun1	Off-topic Discussions	28	07-07-2010 12:02 AM
Bridgestone RE11 Performance Tire Review	Info@PeddersUSA.com	Suspension / Brakes / Chassis	4	12-28-2009 11:58 PM