DT Shorty install today-Engine light now on - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZED SLED · 11-08-2010, 05:46 PM

Hello,
Had DT Shortys installed today and engine light is now on. Autozone diag shows Lean Condition Bank 1. Other mods are CAI intake and Borla axleback. Any ideas how to fix (without getting aftermarket tune)?

SlingShot · 11-08-2010, 05:58 PM

WOW !!! You are the first person to get a light ... Check your O2 sensor connections on the cats ...

2SSCAMARO · 11-08-2010, 06:15 PM

Quote:

Originally Posted by mclark10

Hello,
Had DT Shortys installed today and engine light is now on. Autozone diag shows Lean Condition Bank 1. Other mods are CAI intake and Borla axleback. Any ideas how to fix (without getting aftermarket tune)?

I would just clear the code for now and disconnect the battery cable for a few minutes to reset the trims. It may never return. If it does, then you may have to deal with it.

hypurone · 11-08-2010, 06:46 PM

Quote:

Originally Posted by SlingShot

WOW !!! You are the first person to get a light ... Check your O2 sensor connections on the cats ...

and for leaks at the manifold and downpipes connections as they will draw in air causing a false lean condition...

FUN4JT · 11-08-2010, 06:59 PM

Have DT shorties, hi-flow cats, "X" pipe, CAI and canned Predator tune, zero codes to date after approximately 9k miles.

Ditto on checking for a air leak at the head/headers or the header/cat flange and make sure the o2 sensors are completely plugged in. JT

Slowhawk · 11-08-2010, 07:29 PM

Make sure the driver side front 02 is plugged in. After that it might need an 02 sensor. I've had 2 cars in the shop with the same code.Both had other shops do the install and come to find out the 02's were stripped(common factory problem) and the shops used a torch to get them out.They fried them.

So,reset. If the codes come back quickly change the 02 or go to a shop to diagnos it properly. A lean code means it's dumping 25% more fuel on that side of the motor.

topgun1 · 11-08-2010, 08:08 PM

no codes thrown or SEL on mine either with the DT shorties, even with the hiflow cats installed. yep, like slohawk said, you're getting more fuel on that side of the motor.

ZED SLED · 11-08-2010, 08:08 PM

Thanks for the input everyone. I have to take it back tomorrow to have the the bolts re-torqued so I'll have them check for leaks and O2 issues and reset.

jsharp · 11-08-2010, 08:27 PM

Tis the season for engine codes let me tell ya!

Moody'sSS · 11-11-2010, 05:49 PM

Quote:

Originally Posted by mclark10

Thanks for the input everyone. I have to take it back tomorrow to have the the bolts re-torqued so I'll have them check for leaks and O2 issues and reset.

Problem fixed?

Ivan @ Southwest Speed · 11-11-2010, 06:29 PM

Quote:

Originally Posted by SlingShot

WOW !!! You are the first person to get a light ... Check your O2 sensor connections on the cats ...

Over 100 sets sold and yes, you are the first sir. I need to send you a TShirt.

Quote:

Originally Posted by 2SSCAMARO

I would just clear the code for now and disconnect the battery cable for a few minutes to reset the trims. It may never return. If it does, then you may have to deal with it.

Quote:

Originally Posted by hypurone

and for leaks at the manifold and downpipes connections as they will draw in air causing a false lean condition...

Quote:

Originally Posted by Slowhawk

Make sure the driver side front 02 is plugged in. After that it might need an 02 sensor. I've had 2 cars in the shop with the same code.Both had other shops do the install and come to find out the 02's were stripped(common factory problem) and the shops used a torch to get them out.They fried them.

So,reset. If the codes come back quickly change the 02 or go to a shop to diagnos it properly. A lean code means it's dumping 25% more fuel on that side of the motor.

Quote:

Originally Posted by topgun1

no codes thrown or SEL on mine either with the DT shorties, even with the hiflow cats installed. yep, like slohawk said, you're getting more fuel on that side of the motor.

Looks like you have alot of the same responses. I'd think that there is a leak upstream without a doubt.

Quote:

Originally Posted by moodysilver10

Problem fixed?

Ditto....call me or let me know if you need any support at all.

Ivan @ Southwest Speed

11-08-2010, 05:46 PM	#1
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,614 View My Garage	DT Shorty install today-Engine light now on Hello, Had DT Shortys installed today and engine light is now on. Autozone diag shows Lean Condition Bank 1. Other mods are CAI intake and Borla axleback. Any ideas how to fix (without getting aftermarket tune)? __________________

11-08-2010, 05:58 PM	#2
SlingShot Drives: 2012 ZL1 - #670 Join Date: Jun 2009 Location: Seminole, Fl. Posts: 8,009	WOW !!! You are the first person to get a light ... Check your O2 sensor connections on the cats ... __________________

11-08-2010, 08:08 PM	#7
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	no codes thrown or SEL on mine either with the DT shorties, even with the hiflow cats installed. yep, like slohawk said, you're getting more fuel on that side of the motor. __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

11-08-2010, 08:08 PM	#8
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,614 View My Garage	Thanks for the input everyone. I have to take it back tomorrow to have the the bolts re-torqued so I'll have them check for leaks and O2 issues and reset. __________________

11-08-2010, 08:27 PM	#9
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Tis the season for engine codes let me tell ya! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

11-08-2010, 06:59 PM	#5
FUN4JT Drives: 2010 SSRS, Victory Red, 6 speed Join Date: Mar 2010 Location: Hollister, Ca Posts: 70	Have DT shorties, hi-flow cats, "X" pipe, CAI and canned Predator tune, zero codes to date after approximately 9k miles. Ditto on checking for a air leak at the head/headers or the header/cat flange and make sure the o2 sensors are completely plugged in. JT

11-08-2010, 07:29 PM	#6
Slowhawk Drives: 1999 Trans Am Join Date: Jul 2009 Location: Bridgewater,Ma Posts: 2,018	Make sure the driver side front 02 is plugged in. After that it might need an 02 sensor. I've had 2 cars in the shop with the same code.Both had other shops do the install and come to find out the 02's were stripped(common factory problem) and the shops used a torch to get them out.They fried them. So,reset. If the codes come back quickly change the 02 or go to a shop to diagnos it properly. A lean code means it's dumping 25% more fuel on that side of the motor.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JBA shorty headers installed, engine light on	Acebeforejack	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	06-27-2010 11:41 PM
Pfadt Race Engineering releases new Camaro V8 Engine Mounts	PfadtRacing	Suspension / Brakes / Chassis	6	01-15-2010 01:58 PM
Check engine light after cai install	2010CamaroOutlaw	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	01-08-2010 12:18 AM
Some Texas Lighting Laws	Mecha	USA - Texas	5	10-20-2009 02:49 PM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 06:29 PM