![]() |
|
|
#225 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
Quote:
![]() Where did you come up with 365 rwhp ? Someone pulling a figure out of their butthole ? InsideLine dynoed the Mustang GT 5.0, it managed 395 rwhp/365 lb-ft on the same Dynojet 248 dynomometer they tested the 392 Challenger on. The number includes a 3% SAE weather correction factor. http://blogs.insideline.com/straight...ang-gt-50.html |
|
|
|
|
|
#226 | |
![]() Drives: '07 SRT8 SuperBee, '09 GT500 Join Date: Feb 2009
Location: Austin, Tx
Posts: 684
|
Quote:
__________________
|
|
|
|
|
|
|
#227 | |
![]() ![]() ![]() ![]() ![]() ![]() Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
Quote:
InsideLine dynoed the Mustang GT 5.0, it managed 395 rwhp/365 lb-ft on the same Dynojet 248 dynomometer they tested the 392 Challenger on. InsideLine's quote..."The number includes a 3% SAE weather correction factor." InsideLine used the same DynoJet 248 dynomometer for the 392, old SRT8 and Camaro SS. |
|
|
|
|
|
|
#228 |
![]() Drives: 2010 GT500 Join Date: May 2008
Location: Sherwood Park, Alberta
Posts: 662
|
|
|
|
|
|
|
#229 | |
|
1 n the head,2 n da chest
Drives: 2002 cadillac deville Join Date: Apr 2010
Location: huntsville al.
Posts: 659
|
Quote:
ive got to be very careful how i answer you. to start with I OWN A FREAKING 2011GT, I THINK I KNOW ABOUT EVERYTHING THERE IS TO KNOW ABOUT THEM BESIDES TABLE NAMES FOR VCT!!!! there are no 2011gt's that dyno 395rwhp without mods. mine makes 398rwhp with tune and offroad X. the dodge and ford were RINGERS!!!!!
__________________
2011GT E85, Kooks 1-7/8", 3" offroad X, 2-7/8" overaxles, Roush mufflers, CobraJet intake, SCJ monoblade throttle body, drew 4.5" CAI, Boss302S exhaust valve springs, Baby CobraJet exhaust cams. 3.73 gears, lightweight 300A. 455rwhp @7800/410rwtq SAE 5000lb roller dynojet
|
|
|
|
|
|
|
#230 | |
![]() ![]() ![]() ![]() ![]() ![]() Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
Quote:
Eff it, all these facts and figures by other people, eff it all, it's all just a conspiracy and a lie I'm telling you dude...
|
|
|
|
|
|
|
#231 | |
|
Banned
Drives: 2003 Cobra Convertible Join Date: Feb 2009
Location: CA
Posts: 2,925
|
Quote:
Last edited by THE EVIL TW1N; 12-13-2010 at 08:07 AM. |
|
|
|
|
|
|
#232 | ||
|
Moderator.ca
|
Quote:
Quote:
And how do you get 15% loss equalling 509 at the crank? Inside Line got a reading of 452 at the wheel. With an assumed 15% loss thats 532 crank. I can't really think of how you even got 509 from than.
__________________
Note, if I've gotten any facts wrong in the above, just ignore any points I made with them
__________________ Originally Posted by FbodFather My sister's dentist's brother's cousin's housekeeper's dog-breeder's nephew sells coffee filters to the company that provides coffee to General Motors...... ........and HE WOULD KNOW!!!!__________________ Camaro Fest sub-forum |
||
|
|
|
|
|
#233 | |
|
1 n the head,2 n da chest
Drives: 2002 cadillac deville Join Date: Apr 2010
Location: huntsville al.
Posts: 659
|
Quote:
"only an offroad X, and tune? only? how about 20-30 rwhp more than stock. and my car had 8000miles, so it was broken in. ![]() our altitude is 641 feet at the dyno. there is the "proof". man you very little about cars, so please quit insisting you do. google car knowledge is not the same as real experience. 420rwhp for a 392 is believable. 375rwhp is a high number for a coyote. 365 is more average. 3.31 2011gt's have higher numbers because the driveline losses are reduced by the taller gearing. same reason that official 4v records include the gears used. a person can use 2.73's strictly to get a "record" on a dyno.
__________________
2011GT E85, Kooks 1-7/8", 3" offroad X, 2-7/8" overaxles, Roush mufflers, CobraJet intake, SCJ monoblade throttle body, drew 4.5" CAI, Boss302S exhaust valve springs, Baby CobraJet exhaust cams. 3.73 gears, lightweight 300A. 455rwhp @7800/410rwtq SAE 5000lb roller dynojet
Last edited by assasinator; 12-13-2010 at 09:20 AM. |
|
|
|
|
|
|
#234 |
|
Banned
Drives: 2003 Cobra Convertible Join Date: Feb 2009
Location: CA
Posts: 2,925
|
part of the problem with the InsideLine dyno used is that the front of the vehicle is outside of the facility, while the air measuring tool for the dyno is inside. This can greatly affect the reading of what it believes SAE correction should be. The outside air is going to be denser and cooler than what is measured by the dyno inside.
|
|
|
|
|
|
#235 | |
|
1 n the head,2 n da chest
Drives: 2002 cadillac deville Join Date: Apr 2010
Location: huntsville al.
Posts: 659
|
Quote:
he got that number because the hype associated with the 392 will exceed even the invincible coyote. the 392 will soon have 600hp/600tq, and run 1.70 60' times on 255 all season tires.
__________________
2011GT E85, Kooks 1-7/8", 3" offroad X, 2-7/8" overaxles, Roush mufflers, CobraJet intake, SCJ monoblade throttle body, drew 4.5" CAI, Boss302S exhaust valve springs, Baby CobraJet exhaust cams. 3.73 gears, lightweight 300A. 455rwhp @7800/410rwtq SAE 5000lb roller dynojet
|
|
|
|
|
|
|
#236 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
|
|
|
|
|
|
#237 |
|
1 n the head,2 n da chest
Drives: 2002 cadillac deville Join Date: Apr 2010
Location: huntsville al.
Posts: 659
|
So how does the new SRT8 392 perform? First, it's fast, as in really fast. Dodge claims the 392 is capable of putting down a quarter-mile time of 12.4 seconds at 110.0 mph (the last 2010 we tested did 13.3 at 106.1). Well, our tester, which delivered a 13.0 flat at 111.3, easily outhustled the '10 but couldn't quite live up to Dodge's lofty prediction. (That said, the realized trap speed was higher.) Further, the 392's 0-to-60 time dropped 0.2 second to 4.6 compared to that of last year's 6.1 liter, putting it ahead of the Camaro SS (4.7) but a bit behind the Mustang GT (4.4). Read more: http://www.motortrend.com/roadtests/...#ixzz18AzWdwBg
that is a far cry from 12.4 at 114mph.
__________________
2011GT E85, Kooks 1-7/8", 3" offroad X, 2-7/8" overaxles, Roush mufflers, CobraJet intake, SCJ monoblade throttle body, drew 4.5" CAI, Boss302S exhaust valve springs, Baby CobraJet exhaust cams. 3.73 gears, lightweight 300A. 455rwhp @7800/410rwtq SAE 5000lb roller dynojet
|
|
|
|
|
|
#238 | |
![]() Drives: '07 SRT8 SuperBee, '09 GT500 Join Date: Feb 2009
Location: Austin, Tx
Posts: 684
|
Quote:
C/D: 12.9@114 Inside Line: 12.6@112.1 MT: 13.0@111.3
__________________
|
|
|
|
|
|
|
|
|
![]() |
| Tags |
| 6.4 hemi, dodge, srt8 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! | RPI Designs | Cosmetics and Lighting Modification Discussions | 36 | 04-02-2020 06:32 PM |
| Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 07:56 PM |