Inferno Diablo [COTW 11/24/13]

[leonardo]

In less than 2 years I transformed my IOM Camaro from bone stock to a truly head turning machine !! once I finished with it I sold it and moved on to my next project, a white turbocharged SS which I also plan on finishing in about 2 years but I plan on keeping this Camaro for good. My ducati 1198s is my other baby , I also transformed it from bone stock to a piece of art and plan on keeping it forever

[leonardo]

Diablo Archangel - Current mods to date (work in progress!):




Power-train & Computer modifications:

• Turbonetics Single 76mm Turbocharger (w/ 60lb/hr Injectors) @ 10.6psi, & 7# wastegate springs
• Custom Dynotune using SCT software (Tune by Lance Keck, used and rented Creations N' Chrome Dynojet dynomometer)
• Magnaflow 3" Catback with Polished SR 5" double walled, straight cut, rolled tips, with custom axel-back portion using Center/Offset 3" Universal Magnaflow Mufflers
• RX Products Summit White Catch can & breather kit
• VMAX CNC Ported Throttle Body and painted Summit White
• ADM Twin Fuel Pump System
• Granatelli Motorsports (GMS) Red High Temperature Spark Plug Wires
• Red High Temperature Thermal Heat Shield Protection Spark Plug Wire Boots/Sleeves
• FilterMag (SS-300) oil filter magnet
• Fumoto Quickvalve (F107SW) oil drain valve

Interior (Appearance included) Modifications:

• AutoMeter Dual-pod Pillar
• AEM TruBoost digital/electronic boost controller
• AEM Digital Fuel Pressure gauge
• White Carbon Fiber Door Panels and Dash Trim
• White leather arm rest
• Ultra-gauge multi- purpose performance gauge
• Summit White Painted A/C and Radio Knobs
• Summit White Painted Instrument cluster bezel
• Summit White Painted Steering wheel trim
• Summit White Painted Shifter bezel with red pinstriping
• Smoothed and painted Gloss Black Center Console
• Smoothed and painted Summit White Center Console long trim (aka kick panels) panels with red pinstriping
• Hexis 30000 Black Carbon Fiber Vinyl wrapped sun visors with custom Turbo airbag warning stickers
• Factory Hurst Short Throw Shifter
• White Rally Stripes Shift Knob
• SRP Racing Pedals- black with silver rivets
• Heads-up Display (HUD) installed
• EmblemPros Rear Cup Holder Delete Lighted Switchplate (custom labeled and allows me to activate/deactivate certain LED's around the vehicle)
• McNord Custom White Carbon Speedometer and Tachometer Gauge Faces (Turbo pic, SS emblem, Chevy bow-tie, and custom text)

Exterior Appearance Modifications:

• Custom ZL1 Upper Grille
• Stillen side-skirts
• Stillen rear spats
• Vertical Doors
• 20" TSW Nurburgring Rotary Forged Lightweight Wheels 20"x 9" Front/20"x10" Rear Powdercoated Gloss Black w/Red Pinstripe using a Beugler Pinstriping Tool with 1-Shot "Bright Red" paint.
• Rear custom spoiler painted Summit White
• AMS Carbon Fiber vented hood w/custom paint (hood spears left in carbon fiber, and clearcoated and red pinstriped hood spears)
• AAC Plasma Tail-light Afterburners
• AAC/Oracle LED Concept Side-Markers painted Summit White
• AAC/Oracle Custom Retrofitted Projector HID Headlights w/6K bulbs, satin black painted housing, and Colorshift 2.0 Halos with remote control
• AAC/Oracle LED Switchback Turn Signal/Day time running lights
• AAC/Oracle Six 36" Colorshfit LED Strips (two each under side of the car, two for the front grills, two for engine bay)
• AAC/OracleSix 15" Colorshift LED Strips (two for engine cover, two for the front fender vents, and two for the footwell lighting)
• AAC/Oracle Colorshift Rear Chevy LED Bowtie
• Red and Black Carbon Fiber Inner Rear Chevy Bowtie with Matte Black Outer
• 3D Carbon Front Fender Vents
• 3D Gill Decals
• CBD Carbon Fiber Radiator Cover
• CBD Carbon Fiber Fuse Box Cover
• Custom Carbon Fiber XM Antenna
• G2 White Brake Caliper Paint (with Brembo High Temp decals)
• TrimWorks Black Carbon Fiber Vinyl Wrapped Roof Molding
• Gloss Black Painted Tail-light bezels
• Hexis 30000 Black Carbon Fiber Vinyl wrapped custom side mirror design, and side mirror bezels
• JWM License Plate White LED's
• Headlight Armour Headlight shield and turn signal shield protection kit
• MNP Customs Rear Fascia Vinyl Black-out in "Gloss Black"
• Custom cut Front Fascia Gloss Blackout using Hexis 30000 vinyl and red pinstriping.
• Custom cut Lower Fascia Gloss Blackout using Hexis 30000 vinyl and red pinstriping
• Custom cut Hash Marks using Hexis 30000 vinyl and red pinstriping.
• Gloss Black Vinyl Wrapped Roof 3M 1080 vinyl
• Summit White/Black Painted Engine Cover w/ custom mesh cutouts and colorshift (RGB) lighting.
• GM Black SS Valve Stem Caps w/ White SS Logo.
• Matte Black Mailslot
• Matte Black Stillen Side Skirt "Air Ducts"
• 3M Scotchtal Red Vinyl Pinstriping on the hash marks, front fascia, and rear fascia
• AC Delco Locking Gas Cap (coded to use the car key)

Suspension Modifications:

• Pedders Subframe Bushing Inserts
• Momentum Autosports Tunnel Brace

[leonardo]

goodbye stock wheels ....... hello custom foose wheels

[2010 SSRS]

looking awesome

[leonardo]

- Injen Intake
- Magnaflow cat-back ( must say WOW !!!!!!!!!!! this thing sounds like a beast, I love it !!!! )

[linkwpc]

Wow! Your car is looking great! What happen to your old black one? I know you got the orange one because the black one was a lemon.. but whats going to happen to the black one now?

[C4]

nice

[leonardo]

Originally Posted by linkwpc

Wow! Your car is looking great! What happen to your old black one? I know you got the orange one because the black one was a lemon.. but whats going to happen to the black one now?

Thanks brother, the black one is at the dealership , I guess they are using it as a testing model ........ dont know and dont wanna know haha that car was such a pain in the ass

[OUTATIME]

Hey dude, did I see you getting off the Williamsburg bridge into Manhattan this past weekend around 10:30 pm?? If not, it was an RS with VERY similar mods.

[leonardo]

painted all the calipers and centers in gloss black , got tired of seeing that grey/primer look alike centers and silver calipers

[leonardo]

Alright ladies and gents !!! finally I finished the wheels painting all the rivots IOM ............ here it is ....... I personally love it !! hope others do too

[madmaxx18]

how dark of a tint did you go on the back up lights and side markers? And much darker is it at night with them on now?

[SirMike]

Originally Posted by leonardo

new stealth black CAMARO license frame

I love that frame. I plan to do something very very similar. Looks great man. How do you find the time? Good looking ride all the way around.

[leonardo]

Originally Posted by madmaxx18

how dark of a tint did you go on the back up lights and side markers? And much darker is it at night with them on now?

I tinted them "charcoal" which is the darkest possible, and yes light goes trough just fine

Originally Posted by SirMike

I love that frame. I plan to do something very very similar. Looks great man. How do you find the time? Good looking ride all the way around.

Ha thanks brother, you should make it to the next meet so you can see my new whip in person and about the time ........ hmmmm just push laundry and errands and everything else until last minute lol CAMARO COMES FIRST