12-14-2010, 06:56 PM | #225 | |
That Cam though...
Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010
Location: NJ
Posts: 2,817
|
Quote:
|
|
12-14-2010, 08:05 PM | #226 | |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Quote:
Congrats...on the spoiler! On the install you do need to be careful aligning everything up. Make sure the center piece is on the deck lid evenly and far enough to the rear of the deck lid. You will probably have to elongate some holes on your deck lid to match the spoiler bolt holes. No biggie tho. And yes ...I just used the tape for the side pieces. Just clean the paint with alcohol or wax remover for auto paint first, then mock the side pieces up to match the center piece. Be careful of the gap so when you open the truck to center and side pieces don't hit. Then take blue "painters tape" and outline the positioned side piece. THEN use the 3M adhesion promoter they send with the spoiler and apply where the tape will be from the side piece. Then start appling the side piece install from the trunk lid side first and press on towards the outside. BE CAREFUL to do this right as once it is on...it is on! It is a fairly easy install ....just "take your time"! Go slowly! I hope this helps and post pics when you are done.
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
|
12-14-2010, 08:44 PM | #227 |
That Cam though...
Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010
Location: NJ
Posts: 2,817
|
ok thx. i'm going to do it as soon as it wams up here. prob spring.
|
12-28-2010, 09:44 AM | #228 |
Drives: 2010 Join Date: Sep 2009
Location: Westchester NY
Posts: 990
|
Here are some photos of our one_off spoiler. It will be on the market first week in 2011. Our design inspiration was to make a wing in the sense to be subtle yet not look like an afterthought like many on the market. We hand sculpted it's profile to be more retro. We love it and so did everyone at Camaro Fest this past year. The 5th Gen Camaro doesn't need a huge wing to enhance its already powerful profile and design. The fitment on the trunk is flawless.
|
12-28-2010, 06:07 PM | #229 |
I picked up an SS for Christmas and found a cool rear spoiler almost exactly like the GM concept cars at SEMA. Install was super easy and the quailty shows. Here are some pics of my sweet new ride. I found this spoiler on ebay. The guy selling them agreed to give me a better price if I called in the order and let him use photos of my car to help promote the item.
|
|
12-28-2010, 06:11 PM | #230 | |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Quote:
By the way.....what kind of wheels are those??? Who makes them?
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
|
01-06-2011, 04:20 PM | #231 |
I'm not car-ist
Drives: '10 RY 2LT Camaro '96 Mustang Cobra Join Date: Dec 2010
Location: Chicagoland
Posts: 228
|
__________________
35% tint, faded gill stripes, yellow stitching, black spoiler, decklid stripes
To-Do List: Oracle HALO multicolor headlight + fogs kit; Bumblebee striping kit; Flowmaster 3-chamber cat-back; Roto-Fab Intake. Team LLT-M6 |
01-06-2011, 04:28 PM | #232 |
BLESSEDCHEF10
|
I got the MPD1 and I love it.
__________________
|
01-07-2011, 12:31 PM | #233 |
Wild Man
Drives: 2010 Camaro Join Date: Sep 2010
Location: Milford, Ky
Posts: 516
|
Fbodyman I like that spoiler. Looks good.
__________________
2010 Camaro Black with White Stripes, Jannetty Racing Roto-Fab CAI, VMAX Ported Throttle Body, Long Tube Headers, GMPP Axel Back, Emblem Pros Custom "VOODOO" Under hood Bow tie, Chrome Gill Inserts, HUD plate, Sparks Performance White SS front and rear Plate MPD-1 Spoiler
|
01-09-2011, 09:04 AM | #234 |
Drives: Camaro Performers Magazine Join Date: May 2009
Location: South East
Posts: 121
|
Sorry everyone, my pictures did not turn out good for the rear angle , but here is Anvil Carbon Fiber rear spoiler.
https://www.anvilauto.com/product_de...rspoiler_2010C Here it is in rendering, looks great in person will have more pics when it returns from paint.
__________________
Camaro Performers Magazine SS/RS- 416 stroker, MagnaCharger TVS2300, DSE Sway, Baer 6S Brakes, Forgeline Wheels, BFG Rival, JBA Long tube/Exhaust, Center-Force Clutch, BMR-sfc,ta,tr, Energy Suspension poly kit, ADM CAI & Fuel pump, Norris PCV/Tune, Lingenfelter GT-9 cam, DSS 9" rear ind rear, Innov. West pulleys/8 rib, Pedders Super cloil-overs, MGW shifter,/Seibon/ Anvil carbon Fiber. Owner-American Street Car Series and as seen on R U Faster than a Redneck?...lol
|
01-09-2011, 10:23 PM | #235 |
www.Camaro5store.com
|
Dang! That's a good look! I wish I had someone here in town that had one (or one is stock), so I could see how it would look up on my CGM SS.
|
01-10-2011, 01:18 AM | #236 |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Sorry......I like mine better! Not too much....not too little...and def NOT too ricer! The perfect spoiler! Couldn't be happier!
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
01-10-2011, 01:38 PM | #237 | |
Drives: 2010 IBM 1SS (Former) Join Date: Feb 2009
Location: NoVA
Posts: 2,032
|
Quote:
|
|
01-28-2011, 01:27 AM | #238 |
Drives: 2013 AGM ZL1 BELLA* Join Date: Jan 2011
Location: VA
Posts: 370
|
Do you know if Rick Hendrick is going to release his upgrades to the public to buy? His tail splitter spoiler is probably the best looking one I have seen to this date.???
Last edited by rjs2010SS; 01-28-2011 at 01:28 AM. Reason: Pic |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 05:56 PM |
V6 Camaro Performance Upgrades | rtcat600man | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 387 | 09-19-2019 06:53 PM |
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA | irocnroll | 5th Gen Camaro SS LS LT General Discussions | 101 | 02-27-2012 12:25 PM |
Setting up an IRS/Drivetrain for Drag Racing | Kyle2k | Suspension / Brakes / Chassis | 44 | 06-05-2010 09:17 PM |