DIY part # for ABL (Pictures of Installation included!!!) - Page 20 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 01-19-2011, 11:29 PM

You can t-tap it if you like but if you like a clean look i have a small 2 way splinter like this 3 way one for my car.

SummoneR · 01-19-2011, 11:30 PM

Quote:

Originally Posted by Gene Culley

Ok, so I'm working on figuring this out. My vin is A9113647 so it appears I have the connectors, but I'll have to double check. I have the IOM interior.

If I am reading correctly, Ofer and Tag has used two on the passenger side? What do I do about the connector for the second one on the passenger side?

Ofer, can I buy the pipes from you? I ordered a bunch of the GM lights for stock as well, if anyone wants them.

The passenger side adapter is wrapped around or in a harness running behind the dash, you may have to unwrap it a little to find it. There was a picture on here somewhere can't find it right now.

Here it is.

http://www.camaro5.com/forums/showpo...08&postcount=3

SummoneR · 01-20-2011, 12:14 AM

I am considering changing the color of my ABL to a standard blue. In order to do this as clean as possible I would like to use the male connectors that are attached to the factory light so I can wire it up to a regular blue LED. Does anyone have the part number for the plugs? I did a quick scan through several very long ABL threads looking for them. I know I had seen them before, but can't find them again. I guess I should ahve got some from Ofer when I ordered the kit. ugh.

TJ91 · 01-20-2011, 01:15 AM

i think they were molex connectors

Dr.Bender · 01-20-2011, 01:18 AM

Quote:

Originally Posted by 2SSRS

You can t-tap it if you like but if you like a clean look i have a small 2 way splinter like this 3 way one for my car.

Where can I get this adapter?

2SSRS@Gen5diy · 01-20-2011, 01:22 AM

Female Connector Body

feMale Connector Body 12047662
Terminal Retainer 12047664
Female Terminals (req 2) 12047767

Male Connector Body 12047663
Terminal Retainer 12047665
Male Terminals (req 2) 12047581

Dr.Bender · 01-20-2011, 01:23 AM

Quote:

Originally Posted by 2SSRS

Female Connector Body

feMale Connector Body 12047662
Terminal Retainer 12047664
Female Terminals (req 2) 12047767

Male Connector Body 12047663
Terminal Retainer 12047665
Male Terminals (req 2) 12047581

Excuse my ignorance, I have no Idea what that means or where to get them.

2SSRS@Gen5diy · 01-20-2011, 01:23 AM

Quote:

Originally Posted by SummoneR

I am considering changing the color of my ABL to a standard blue. In order to do this as clean as possible I would like to use the male connectors that are attached to the factory light so I can wire it up to a regular blue LED. Does anyone have the part number for the plugs? I did a quick scan through several very long ABL threads looking for them. I know I had seen them before, but can't find them again. I guess I should ahve got some from Ofer when I ordered the kit. ugh.

But i sent you one of the splitters.

Quote:

Originally Posted by Dr.Bender

Where can I get this adapter?

From me.

SummoneR · 01-20-2011, 01:26 AM

Quote:

Originally Posted by TJ91

i think they were molex connectors

Thanks but there are a ton of different types of Molex connectors. =)

Quote:

Originally Posted by Dr.Bender

Where can I get this adapter?

Ofer (2SSRS) sells them.

Dr.Bender · 01-20-2011, 01:27 AM

shoot me the info...

2SSRS@Gen5diy · 01-20-2011, 01:28 AM

Quote:

Originally Posted by Dr.Bender

Excuse my ignorance, I have no Idea what that means or where to get them.

I cant say but do a search on the site, With any of the part numbers i posted, And you will need a crimping tool as its small terminals, but you guys know how to do this.

TJ91 · 01-20-2011, 01:29 AM

Hey 2SSRS, can we get more pics of your car lit up?

SummoneR · 01-20-2011, 01:29 AM

Quote:

Originally Posted by 2SSRS

But i sent you one of the splitters.

From me.

You did, and I still need to buy the GM lights to plug into the splitter, but rather than buy a GM light that is Ice Blue, I wanted to hard wire a regular Blue LED to the male connector to plug into the splitter you sent me. I plan to switch out the door lights as well but I don't want to cut off the factory LED you know what I mean? I want it to be clean and returnable to factory color by just buying three lights if I chose to go back later.

TJ91 · 01-20-2011, 01:30 AM

oh and can you pm me the price of an ABL tube please.
My girlfriend wants to go to Buffalo for shopping so i plan on buying the LEDs there for $12 a piece rather then 30

01-20-2011, 12:14 AM	#269
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	I am considering changing the color of my ABL to a standard blue. In order to do this as clean as possible I would like to use the male connectors that are attached to the factory light so I can wire it up to a regular blue LED. Does anyone have the part number for the plugs? I did a quick scan through several very long ABL threads looking for them. I know I had seen them before, but can't find them again. I guess I should ahve got some from Ofer when I ordered the kit. ugh. __________________

01-20-2011, 01:15 AM	#270
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	i think they were molex connectors __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

01-20-2011, 01:29 AM	#278
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	Hey 2SSRS, can we get more pics of your car lit up? __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

01-20-2011, 01:30 AM	#280
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	oh and can you pm me the price of an ABL tube please. My girlfriend wants to go to Buffalo for shopping so i plan on buying the LEDs there for $12 a piece rather then 30 __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 10:20 PM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
got my new Camaro today pictures included !!	yesno20102ssblack	Camaro Photos \| Spyshots \| Video \| Media Gallery	33	05-02-2009 11:05 AM
First Camaro Impressions (Pictures Included) --- Red Jewel Tintcoat!	dect	Camaro Photos \| Spyshots \| Video \| Media Gallery	80	01-27-2009 07:45 PM

01-19-2011, 11:29 PM	#267
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	You can t-tap it if you like but if you like a clean look i have a small 2 way splinter like this 3 way one for my car.

01-20-2011, 01:22 AM	#272
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Female Connector Body feMale Connector Body 12047662 Terminal Retainer 12047664 Female Terminals (req 2) 12047767 Male Connector Body 12047663 Terminal Retainer 12047665 Male Terminals (req 2) 12047581

01-20-2011, 01:27 AM	#276
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	shoot me the info...