DIY part # for ABL (Pictures of Installation included!!!)

[SummoneR]

Originally Posted by 2SSRS

Female Connector Body

feMale Connector Body 12047662
Terminal Retainer 12047664
Female Terminals (req 2) 12047767


Male Connector Body 12047663
Terminal Retainer 12047665
Male Terminals (req 2) 12047581

Thank you Sir I appreciate it!!
Looking forward to this mod! Thanks for the splitter as well!

[TJ91]

Originally Posted by SummoneR

Thanks but there are a ton of different types of Molex connectors. =)


Ofer (2SSRS) sells them.

lmao sorry about that, im not too knowlegeble on these things

[SummoneR]

Originally Posted by TJ91

lmao sorry about that, im not too knowlegeble on these things

No problem.

Ha Ofer I found the post that listed them I was originally searching for plug not connector haaa. Thanks again!

[2SSRS@Gen5diy]

Originally Posted by Dr.Bender

shoot me the info...

I will right now

Originally Posted by TJ91

Hey 2SSRS, can we get more pics of your car lit up?

Door panels are off the car right now, did you see the pics of the outside and inside door handles with lights in it, and more i added lights to the door panel storage box.

Originally Posted by SummoneR

You did, and I still need to buy the GM lights to plug into the splitter, but rather than buy a GM light that is Ice Blue, I wanted to hard wire a regular Blue LED to the male connector to plug into the splitter you sent me. I plan to switch out the door lights as well but I don't want to cut off the factory LED you know what I mean? I want it to be clean and returnable to factory color by just buying three lights if I chose to go back later.

Why did you not say any thing i have so many Blue LED'S its not funny, on Sunday PM me and i will take care of you let me know if you need 3 for the dash and will get you taken care of.

Originally Posted by TJ91

oh and can you pm me the price of an ABL tube please.
My girlfriend wants to go to Buffalo for shopping so i plan on buying the LEDs there for $12 a piece rather then 30

PM on the way.

[SummoneR]

Originally Posted by 2SSRS

I will right now



Door panels are off the car right now, did you see the pics of the outside and inside door handles with lights in it, and more i added lights to the door panel storage box.



Why did you not say any thing i have so many Blue LED'S its not funny, on Sunday PM me and i will take care of you let me know if you need 3 for the dash and will get you taken care of.



PM on the way.

LOL I know I should have said something. I actually have the LED's just need the plugs with pigtails so I can wire them to the LED's I have standard 5mm LED's with resistors prewired. That should work right? I was just going to connect them to the end of the light tube. If not I'll PM you Sunday.

[TJ91]

2SSRS, if you can make me some matching factory lights for cheaper, let me know

[Dr.Bender]

Ok think i have everything on the way... I will read and re-read this thread over to see how to do it...

Im good with the human body but not so savvy with cars...

Any photos on how to assemble the LED to the tube?
Do we have to solder?
Where can I get the 5-star torque?

Sorry not very mechanical!

[Gene Culley]

Originally Posted by 2SSRS

You can t-tap it if you like but if you like a clean look i have a small 2 way splinter like this 3 way one for my car.

Ofer, ok, if you can make me a 2 way splinter I would greatly appreciate it. I'd rather just use two lights to make it look like it came from the factory and I would rather not cut anything.

Looking at the lights, and maybe Tag will know, but does the GM light lead reach all the way over to the passenger side, from the new splinter you're making me, or am I going to have to lengthen it?

So, let me know what I need to do to purchase splinter and tubes from you.

[Gene Culley]

Originally Posted by SummoneR

The passenger side adapter is wrapped around or in a harness running behind the dash, you may have to unwrap it a little to find it. There was a picture on here somewhere can't find it right now.

Here it is.

http://www.camaro5.com/forums/showpo...08&postcount=3

Thank you for helping. From what I understand, there is only 1 connector behind the instrument cluster, but I want to put two light tubes in like Tag so I will need to be able to put 2 lights into the same connector.

[SummoneR]

Originally Posted by Gene Culley

Thank you for helping. From what I understand, there is only 1 connector behind the instrument cluster, but I want to put two light tubes in like Tag so I will need to be able to put 2 lights into the same connector.

No problem!

There should be two connectors one just behind the fuse panel cover, and another behind the instrument cluster in the harness like in the post I quoted. If you get the splitter from Ofer, it will plug into that connector and run long enough for you to plug in one light on the far right passenger side, and the left side of the passenger side panel. The light from GM is long enough to plug into the connector just behind the fuse panel cover. If you do it how TAG did it you won't need any drilling if you use two or three lights to accomplish this. People are using three lights total because the passenger side is really long and the light does not always make it to the other side it just fades way too much.

This is where you plug in the GM light for the drivers side. This is behind the fuse panel cover.


This is where you would plug in Ofer's splitter to feed the passenger side lights. This one is behind the Instrument cluster.

[Gene Culley]

Originally Posted by SummoneR

No problem!

There should be two connectors one just behind the fuse panel cover, and another behind the instrument cluster in the harness like in the post I quoted. If you get the splitter from Ofer, it will plug into that connector and run long enough for you to plug in one light on the far right passenger side, and the left side of the passenger side panel. The light from GM is long enough to plug into the connector just behind the fuse panel cover. If you do it how TAG did it you won't need any drilling if you use two or three lights to accomplish this. People are using three lights total because the passenger side is really long and the light does not always make it to the other side it just fades way too much.

This is where you plug in the GM light for the drivers side. This is behind the fuse panel cover.


This is where you would plug in Ofer's splitter to feed the passenger side lights. This one is behind the Instrument cluster.

Thank you again for the help and explanation. Yeah, if Ofer's splitter will basically allow me to do this plug and play and long enough, that is the bomb! LOL. Thanks! Ofer, I'm ready man!!

[SummoneR]

Originally Posted by Gene Culley

Thank you again for the help and explanation. Yeah, if Ofer's splitter will basically allow me to do this plug and play and long enough, that is the bomb! LOL. Thanks! Ofer, I'm ready man!!

Yup No Problem, glad I could help. If you really plan to use only two lights total all you would need is an extension cable. But I would definitely get the splitter so that if you do only run two total lights now, and decide you want to add the second light to the passenger side for three lights total, you always have that extra plug behind the dash waiting for you to come to the light side.


Best of luck on your install!

[Gene Culley]

Originally Posted by SummoneR

Yup No Problem, glad I could help. If you really plan to use only two lights total all you would need is an extension cable. But I would definitely get the splitter so that if you do only run two total lights now, and decide you want to add the second light to the passenger side for three lights total, you always have that extra plug behind the dash waiting for you to come to the light side.


Best of luck on your install!

I agree, but I am going to do all 3 up front and get it over with lol.

[SummoneR]

Originally Posted by Gene Culley

I agree, but I am going to do all 3 up front and get it over with lol.

That's the best bet. I sent you a visitor message about getting some ABL's. Your PM's are disabled? Or you can email me at SUMNRSS@gmail.com I don't want to hijack so I'll leave it at that.