![]() |
|
|
#15 |
|
boostalicious
|
Im no worried about price so much, mostly the interior sound in the cabin. Something that wont make a newborn tone def like my mbrp/kooks setup.
__________________
*Powered by Maggie**553rwhp 541rwtq*
|
|
|
|
|
|
#16 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
The Magnaflow will be good for you. Either the 2.5" or 3"....it's just that the 3" has a little more of a deeper rumble when it's at idle.
My original setup was a Muffler delete + a resonated x-pipe. I wasn't horribly loud but did have some of the drone and alot of decel pop. Once I went with LTs I went over to the 3" Magnaflow and all that went away. I haven't heard any drone and the decel popping is virtually gone. You can still hear some popping every once in a while but it very mellow and much harder to hear. I think either one on those systems will be good to use. It's just the amount of money do you want to spend and if you want a little more deep rumble or not. The 3" Magnaflow + LTs is a pretty common setup. You should be able to find someone in your area to listen to it in person. Your only other options will probably be to go with the stock cat-back with your LTs or maybe a Corsa system.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal ![]() |
|
|
|
|
|
#17 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009
Location: Kingsland, Ga
Posts: 2,553
|
Video no workie!!
__________________
|
|
|
|
|
|
#18 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Yeah, this is a very real old thread. The video has been gone for a long time. If I get a chance I'll try to make another one.
But trust me, the Magnaflow Street 2.5 is as quiet as it gets. You get the two regular magnaflow mufflers plus a resonated X pipe. But as mentioned, its the perfect catback for guys with long tube headers looking to keep the noise level in check. But I like to warn people. If you don't have long tube headers you probably won't like the Magnaflow Street catback, because it will be just too quiet. |
|
|
|
|
|
#19 |
|
Tap Out
Drives: 2011 Camaro SS A6 SGM Join Date: Oct 2010
Location: USA
Posts: 189
|
SGO, I'm thinking about either Corsa or Magna Flow CB. What is the Part No. for your setup? Also, I see you picked up a little in the quarter. Is that b/c of the TB or the catback? Thinks for the infor Bro.
|
|
|
|
|
|
#20 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Quote:
MagnaFlow Street Series 2.5" System, Dual Split Rear Exit Magnaflow's Stainless Steel Street Series Cat-Back for the 2010 Camaro SS 6.2L V8 L99 and LS3 features 11" Rear Oval Mufflers and Dual 4" Polished Stainless Steel Tips. Lifetime Warranty and Free Shipping!* Manufacturer: Magnaflow SKU: 103225 Part No: 16579
|
|
|
|
|
|
|
#21 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Check with JDP Motorsports for some of the best pricing on Magnaflow.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal ![]() |
|
|
|
|
|
#22 |
|
Tap Out
Drives: 2011 Camaro SS A6 SGM Join Date: Oct 2010
Location: USA
Posts: 189
|
Is the 3inch Mag Catback much louder than the 2.5inch? I like the x-pipe with that kit. But I don't want my car loud. Chime in please!!!
|
|
|
|
|
|
#23 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Quote:
Neither system is loud all by themselves. But especially with headers, the 3'' System is definitely louder than the 2.5 Street system. |
|
|
|
|
|
|
#24 |
|
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,580
|
I take it the competition is louder than street then? ...curious to know how much so..
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
|
|
|
|
|
#25 |
|
Tap Out
Drives: 2011 Camaro SS A6 SGM Join Date: Oct 2010
Location: USA
Posts: 189
|
SGO, did you dyno car after adding the Magna Flo setup? If so, did you realize any gain? Catback should be worth 10hp/15tq. I seen you went faster in the quarter for some reasnon. I have almost the same setup as you except for catback, TB, and Nittos. I ran a best of 12.26 at 113.58. My 60ft was 1.83 and it was very cold to us here-39 ambient temps. I m really looking at the 3inch CB if the cabin noise is tolerable-I like mean sounds, not noise. Man, thanks for your positive feedback, it really helps.
|
|
|
|
|
|
#26 |
|
Tap Out
Drives: 2011 Camaro SS A6 SGM Join Date: Oct 2010
Location: USA
Posts: 189
|
Carverman, do you have any drone with the 3inch Magna CB? I see you have the M6. I know it is diff. with the A6 b/c of the AFM. Did you realize any gains in the quarter or dyno? Please chime in.
|
|
|
|
|
|
#27 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Quote:
With the 3" Magnaflow I get no drone over that same hill. I don't get on the highway but every once in a while and I can't remember any drone when I did. Decel popping on the other hand with the muffler delete was pretty prominent. That's pretty much all gone with the 3" Magnaflow as well. Personally I wasn't a fan of the decel popping. I bet the 2.5" would be the same. As far as picking up HP.....don't know. I put on LTs, the 3" Magnaflow, and a tune all at once. That completely changed the car. I picked up over 1/2 a second in the 1/8th mile with crappy launches (2.1 - 2.2 60'). I'm hoping to do even better when the track opens up in March. I need more seat time. ![]() I don't think you are really going to see any noticable HP increase over either one. Cat-backs are mostly for sound. You might get a little but very little. Don't bet on the 10-15 rwhp claims.....that's just been my experience. And the HP difference betwwen the Magnaflow 2.5" vs 3" will probably be nothing. I definately like the sound of the 3" Magnaflow with LTs. It's not that loud unless you're getting on it and even then it's not something that's going to blow you....or the neighbors....away. Nothing that's going to cause the cops to come looking for you either. I agree...if you are looking for the quietest then either do the 2.5" or go back to stock cat-back with the LTs. If you want a good middle of the ground...not too quiet but not to loud....I would go with the 3". There is a reason why the 3" is so popular with a set of LTs. Again...I'm not knocking the 2.5" system. It's just all in what you want for the sound. Personally I wouldn't want it any quieter and I love the deep rumble that it settles into at idle....but again that's just me. Call JDP Motorsports (www.MagnaflowPlus.com) and talk with them. They sell a bunch of Magnaflow stuff. Ask them what's more popular and what their experience with the two systems are. Get a price on both systems while you're talking with them. They're one of the cheapest authorized dealers around. ADM Performance pretty much only sells the Magnaflow 3". Call and talk to Andy...and call and talk to Ted over at Jenetty as well. See what they recommend and why.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal ![]() |
|
|
|
|
|
|
#28 |
|
Tap Out
Drives: 2011 Camaro SS A6 SGM Join Date: Oct 2010
Location: USA
Posts: 189
|
Thanks for the info gentlemen. I want a deeper tone and rumble, and may go with the 3inch.
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Magnaflow V6 Street Series Sound File* | JDP Motorsports | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 26 | 10-03-2016 05:49 PM |
| Magnaflow Exhaust Systems In Stock! | Sound Clips+Dynos | Special Offer | FREE S&H!!! | AJ@ECSMotorsports | V8 Bolt-Ons & Tunes | 178 | 11-20-2010 11:02 PM |
| Exhaust Sale @ KY SPEED: Kooks, ARH, Magnaflow | FRCBobby | V8 Bolt-Ons & Tunes | 0 | 10-07-2009 10:08 AM |
| Stock Compared to Magnaflow Catback System | PGRICK | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 6 | 08-08-2009 03:49 PM |
| magnaflow catback | bowtieguy#3 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 1 | 06-25-2009 10:39 PM |