DIY part # for ABL (Pictures of Installation included!!!) - Page 34 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 02-14-2011, 02:43 PM

Its there, Your car is later but not past the vin 9160000, gm did some ............. and moved it from the first place to here.

Huggerorange73 · 02-14-2011, 02:53 PM

Quote:

Originally Posted by 2SSRS

Its there, Your car is later but not past the vin 9160000, gm did some ............. and moved it from the first place to here.

FOUND IT!

Thank you sir!

2SSRS@Gen5diy · 02-14-2011, 02:56 PM

Quote:

Originally Posted by Huggerorange73

FOUND IT!

Thank you sir!

Your luck i was on line and have done so many that i know wher GM is hiding there connectors.

WCoolBreeze · 02-14-2011, 07:50 PM

I was at Ofer's this weekend for some of his Expert assistance and I now have the Blue ABL all around on my doors and also showing up better across my dash. Thanks Ofer. We also installed a Herritage Grill, and T-Rex lower Grill on my car, a 2LT/RS.

Walt B.

TJ91 · 02-14-2011, 09:45 PM

Quote:

Originally Posted by WCoolBreeze

I was at Ofer's this weekend for some of his Expert assistance and I now have the Blue ABL all around on my doors and also showing up better across my dash. Thanks Ofer. We also installed a Herritage Grill, and T-Rex lower Grill on my car, a 2LT/RS.

Walt B.

pics or it didnt happen

WCoolBreeze · 02-14-2011, 09:53 PM

Pictures have been taken, I just need time to download them from the camera and upload them to a site and then finally post them. Should be done tomorrow. I have work taking my time now, I am a teacher and I have to prepare for school/work tomorrow. Doing grades and lesson planning.

Walt B.

Gene Culley · 02-14-2011, 10:07 PM

Quote:

Originally Posted by Huggerorange73

FOUND IT!

Thank you sir!

Mine you could feel right at the top under the tape. It was screaming, here I am lol. They must have moved some around here and there.

Huggerorange73 · 02-14-2011, 10:30 PM

Quote:

Originally Posted by Gene Culley

Mine you could feel right at the top under the tape. It was screaming, here I am lol. They must have moved some around here and there.

I'm so glad he pointed it out to me....I was ready to start splicing into the wires to tap it in.

I had to stop because of Valentines Day....plus I need to pick up the plastic tubing and some dremel discs to finish this up.

Lastly, which way do I want to place the light tube in regards to the reflective strip?

Hopefully I can bang all this out tomorrow....I did plug everything in and all 3 leds are active...if not it'll have to wait until Friday.

2SSRS@Gen5diy · 02-14-2011, 10:34 PM

Quote:

Originally Posted by Huggerorange73

I'm so glad he pointed it out to me....I was ready to start splicing into the wires to tap it in.

I had to stop because of Valentines Day....plus I need to pick up the plastic tubing and some dremel discs to finish this up.

Lastly, which way do I want to place the light tube in regards to the reflective strip?

Hopefully I can bang all this out tomorrow....I did plug everything in and all 3 leds are active...if not it'll have to wait until Friday.

You want the white stripe down and pointing to the motor, from there start to move it best you can till you find the best spot.

Huggerorange73 · 02-14-2011, 10:47 PM

Quote:

Originally Posted by 2SSRS

You want the white stripe down and pointing to the motor, from there start to move it best you can till you find the best spot.

Thanks again for all your help with this mod!

Does the light pipe slide fairly easy once it's in the plastic tube? I don't want to snap the end of the GM LED off when tweaking it.

2SSRS@Gen5diy · 02-14-2011, 11:00 PM

You will not snap the end of the off, but it takes a little effort.

camaro2lt · 02-14-2011, 11:22 PM

Ofer I think I might try doing this mod yesterday I sanded the top of the trim pices all I need is the materials can you list everything also when I tried the first time to do this mod I couldnt get the bottom screws off of the speed cluster they are super tight

Thanks richie

2SSRS@Gen5diy · 02-15-2011, 09:41 AM

Quote:

Originally Posted by camaro2lt

Ofer I think I might try doing this mod yesterday I sanded the top of the trim pices all I need is the materials can you list everything also when I tried the first time to do this mod I couldnt get the bottom screws off of the speed cluster they are super tight

Thanks richie

To do the ABL on your dash this is what you need to Buy.

1 From gm you need to buy 3 lights in the color you need.

The part # for the blue lighting is 92238395

The part # for the orange lighting is #92228416 (it is red)

And the light tube is from Me.

And one last part GM removed the connectors on all cars, 2010up past the VIN 9160000 so if you have that number you will need to t-tap or get a harness that is plug and play

OmniCamaro · 02-15-2011, 09:49 AM

Quote:

Originally Posted by 2SSRS

To do the ABL on your dash this is what you need to Buy.

1 From gm you need to buy 3 lights in the color you need.

The part # for the blue lighting is 92238395

The part # for the orange lighting is #92228416 (it is red)

And the light tube is from Me.

And one last part GM removed the connectors on all cars, 2010up past the VIN 9160000 so if you have that number you will need to t-tap or get a harness that is plug and play

This is the kind of thing that should be in the first post! Great info!

Sent from my iPhone using Tapatalk

02-14-2011, 02:43 PM	#463
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Its there, Your car is later but not past the vin 9160000, gm did some ............. and moved it from the first place to here. Attached Images

02-14-2011, 07:50 PM	#466
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	I was at Ofer's this weekend for some of his Expert assistance and I now have the Blue ABL all around on my doors and also showing up better across my dash. Thanks Ofer. We also installed a Herritage Grill, and T-Rex lower Grill on my car, a 2LT/RS. Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

02-14-2011, 09:53 PM	#468
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	Pictures have been taken, I just need time to download them from the camera and upload them to a site and then finally post them. Should be done tomorrow. I have work taking my time now, I am a teacher and I have to prepare for school/work tomorrow. Doing grades and lesson planning. Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

02-14-2011, 11:22 PM	#474
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	Ofer I think I might try doing this mod yesterday I sanded the top of the trim pices all I need is the materials can you list everything also when I tried the first time to do this mod I couldnt get the bottom screws off of the speed cluster they are super tight Thanks richie __________________ Email: rdurso1@yahoo.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 10:20 PM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
got my new Camaro today pictures included !!	yesno20102ssblack	Camaro Photos \| Spyshots \| Video \| Media Gallery	33	05-02-2009 11:05 AM
First Camaro Impressions (Pictures Included) --- Red Jewel Tintcoat!	dect	Camaro Photos \| Spyshots \| Video \| Media Gallery	80	01-27-2009 07:45 PM

02-14-2011, 11:00 PM	#473
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	You will not snap the end of the off, but it takes a little effort.