Plastidipped(painted) my SS wheels satin black. - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Buffnshine · 04-05-2011, 01:27 PM

so you DOnt have to scuff the wheels first, just wash and maybe an ISO wipe? Has anyone tried peeling it back off yet? And where is it available?

PoorMansCamaro · 04-05-2011, 02:33 PM

Quote:

Originally Posted by Buffnshine

so you DOnt have to scuff the wheels first, just wash and maybe an ISO wipe? Has anyone tried peeling it back off yet? And where is it available?

Supposed to be at ace hardware. I went to 3 stores and found only I can.

Anyone know if that's enough?

PoorMansCamaro · 04-05-2011, 05:41 PM

FYI, lowes carries them, and I needed 2 cans

C586 · 04-05-2011, 05:54 PM

Quote:

Originally Posted by Buffnshine

so you DOnt have to scuff the wheels first, just wash and maybe an ISO wipe? Has anyone tried peeling it back off yet? And where is it available?

No. Just clean and spray. If you scuff them and want to peel it off the finish on the rim will be ruined.

Buffnshine · 04-06-2011, 06:02 AM

Quote:

Originally Posted by C586

No. Just clean and spray. If you scuff them and want to peel it off the finish on the rim will be ruined.

yea that is what I was thinking

YOUNGnRECKLESS · 04-06-2011, 10:31 PM

so if I do this with the note cards around the outside and spray a coat, wait an hour, spray a coat, wait, will the edges rip up that are touching nearest the cards? Like someone had said, it peeled up when removing tape...just curious how to get around that aspect...

Thanks! awesome idea

Fubar · 04-06-2011, 11:12 PM

SirMike · 04-07-2011, 01:25 PM

Quote:

Originally Posted by YOUNGnRECKLESS

so if I do this with the note cards around the outside and spray a coat, wait an hour, spray a coat, wait, will the edges rip up that are touching nearest the cards? Like someone had said, it peeled up when removing tape...just curious how to get around that aspect...

Thanks! awesome idea

Good question. I am also interested in doing this but have a few concerns.

PoorMansCamaro · 04-07-2011, 02:09 PM

Quote:

Originally Posted by YOUNGnRECKLESS

so if I do this with the note cards around the outside and spray a coat, wait an hour, spray a coat, wait, will the edges rip up that are touching nearest the cards? Like someone had said, it peeled up when removing tape...just curious how to get around that aspect...

Thanks! awesome idea

Quote:

Originally Posted by SirMike

Good question. I am also interested in doing this but have a few concerns.

I also thought of this. I actually touched up my rims with the plasti dip because i did it without tires on. then I got the tires mounted, and they ripped the plasti dip in some area's. On a slow day, I may rip it all off and start over with the tires still on.

Anyway, as I was touching them up, I just sprayed them with nothing taped off or using cards. Just sprayed it right on the rim and some overspray got on the tires. It wont hurt the tire. After it dried, I drove around and they started to peel off the tire. (I'm assuming it did this because of the flex of the tires while driving) Just finish peeling it off the tire, and you are good to go.

YOUNGnRECKLESS · 04-09-2011, 10:17 AM

This is tempting, I think I'm just going to commit to it next weekend haha

cntryman77 · 04-09-2011, 11:22 AM

Quote:

Originally Posted by clutch

some guys on the g37 forums have used plasi dip as a primer and then painted the wheels the color they wanted and then also cleared them. This way you can peel it away if you want to change it up

I was wondering if you could paint over this...I've been looking at getting a set of factory 20's for my LS & painting them black with an orange pinstipe....this would be perfect for that

Elykson · 04-09-2011, 03:16 PM

Couldn't you just pull the cards after each application of plasti-dip? Then it wouldn't dry to them? I haven't done my spare set of rims yet, but was planning on trying that.

PoorMansCamaro · 04-09-2011, 04:01 PM

Quote:

Originally Posted by cntryman77

I was wondering if you could paint over this...I've been looking at getting a set of factory 20's for my LS & painting them black with an orange pinstipe....this would be perfect for that

Just fyi, the pinstripe on the factory 20's will be VERY thin.

PoorMansCamaro · 04-09-2011, 04:02 PM

Quote:

Originally Posted by Elykson

Couldn't you just pull the cards after each application of plasti-dip? Then it wouldn't dry to them? I haven't done my spare set of rims yet, but was planning on trying that.

yes, that's probably a good option, if you want to keep putting cards back on after each layer.

04-05-2011, 01:27 PM	#113
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	so you DOnt have to scuff the wheels first, just wash and maybe an ISO wipe? Has anyone tried peeling it back off yet? And where is it available? __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

04-05-2011, 05:41 PM	#115
PoorMansCamaro Drives: Really Slow Join Date: Apr 2010 Location: PA Posts: 57,227	FYI, lowes carries them, and I needed 2 cans __________________

04-06-2011, 10:31 PM	#118
YOUNGnRECKLESS Building the Beast Drives: 2010 VR LS3 Join Date: Oct 2010 Location: Queens, New York Posts: 1,398 View My Garage	so if I do this with the note cards around the outside and spray a coat, wait an hour, spray a coat, wait, will the edges rip up that are touching nearest the cards? Like someone had said, it peeled up when removing tape...just curious how to get around that aspect... Thanks! awesome idea __________________

04-09-2011, 10:17 AM	#122
YOUNGnRECKLESS Building the Beast Drives: 2010 VR LS3 Join Date: Oct 2010 Location: Queens, New York Posts: 1,398 View My Garage	This is tempting, I think I'm just going to commit to it next weekend haha __________________

04-09-2011, 03:16 PM	#124
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,190	Couldn't you just pull the cards after each application of plasti-dip? Then it wouldn't dry to them? I haven't done my spare set of rims yet, but was planning on trying that. __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416

04-06-2011, 11:12 PM	#119
Fubar Drives: SW 2SS/RS M6 Join Date: Jul 2009 Location: Ankeny,IA. Posts: 267

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
20" SS PVD Black Chrome Wheels	wheelguy	Wheels and Tires Talk Sponsored by The Tire Rack	4	04-11-2010 11:57 PM
FS: Mirror Black 2010 Camaro SS Wheels!	Mike TexaSS	USA - Texas	5	03-02-2010 04:12 PM
FS" Mirror Black 2010 Camaro SS Wheels	Mike TexaSS	Wheels / Tires	0	03-01-2010 05:15 PM
Opinions please: CGM 2 SS w/ Black stripes. Polished wheels or standard RS finish?	Fivestars	5th Gen Camaro SS LS LT General Discussions	15	01-15-2010 10:58 AM
PADDOCK CHEVROLET $500 BELOW MSRP PLUS UP TO $1000 IN REBATES!!!!!!	454chevelle71	Dealer Camaros for Sale	47	10-01-2009 11:47 AM