![]() |
|
|
#3207 |
![]() Drives: RS Victory Red/BS V6 Join Date: Aug 2010
Location: toronto
Posts: 384
|
So i went to the track, the car felt stronger and definately had some gains from my intake and headers, the only thing is i didnt get a better time slip..... i only managed a 15.01 at 95mph. The weather last night was super humid though around 32-34 degrees with about 90% humidity. The car felt strong and went great but it just didnt show it, maybe it was me in driving but i seriously think it was the weather. A 2011 5.0L only ran a best of 13.9 all day aswell so everyone was going pretty slow yesterday. One thing i did knotice though on one time slip was i got 101 mph but a ET of 15.5 i believe i missed third on that run though.
The other thing is that when i did a few runs i checked the intake it did move up and close the gap so i re-adjusted it but we left after that. ill wait for the cooler weather and DEFINATELY a set of BMR trailing arms to help that bit of wheel hopp. Otherwise the Vararam feels great and i love it 3rd 4th and 5th are alot more usefull now! Ill post the time slip when i get home! thanks
__________________
2010 Camaro 2LT RS M6 VR/BS Flowmaster AMT Axle Back Vararam Ram Air Intake P13 Plazma Bulbs DT Shorty Headers Heritage Grill Blacked-Out Taillights and Side Markers ![]() |
|
|
|
|
|
#3208 | |
|
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
Quote:
There is no doubt it is the weather. This weather SUCKS for making power. |
|
|
|
|
|
|
#3209 |
![]() ![]() ![]() ![]() ![]() |
|
|
|
|
|
|
#3210 |
|
Love me some Tacos
|
Well the weather here is around 70 today. Last night when I installed the Vararam it was 67. Also 15.0 for this car I would think looking at other times that are posted is pretty slow. What was your previous time before the modification? Weather, Driver and of course car set up has alot to do with 1/4 mile times. Humm, any thoughts?
|
|
|
|
|
|
#3211 | |
![]() |
Quote:
|
|
|
|
|
|
|
#3212 |
![]() Drives: RS Victory Red/BS V6 Join Date: Aug 2010
Location: toronto
Posts: 384
|
Last time the temputure was probally around 25 with little to no humidity, a very nice calm summer day, i ran a 14.98 at best... but that was my first time ever at the track , i know if i didnt miss 3rd on one pass i would of definitely hit a 14sec pass , i had the guy just before the 1000ft and missed 3rd gear... he ran 14.1 i ran a 15.4 , oh well always a next time!
i thought about it to run pretty much exact same time as stock at about 8-10* higher temp and a crap load more of humidity , the car has to be running decent, and for a 5.0 to run a 13.9... i should be on track somewhere lol!
__________________
2010 Camaro 2LT RS M6 VR/BS Flowmaster AMT Axle Back Vararam Ram Air Intake P13 Plazma Bulbs DT Shorty Headers Heritage Grill Blacked-Out Taillights and Side Markers ![]() |
|
|
|
|
|
#3213 |
![]() ![]() ![]() ![]() ![]() |
Spyderbuddy,
So did the old clean side breather assembly just yank right out? I was afraid to start pulling on mine. Where did you get that new breather and the fitting? I'm about to order a catch can from Rx, and he recommended plugging the breather assembly instead of using the Vararam breather, and then using the breather cap they provide for the oil cap. I like your solution though and am anxious to hear more. |
|
|
|
|
|
#3214 | |
![]() ![]() Drives: 2010 Black Camaro 2LT/RS Auto Join Date: Apr 2010
Location: San Fernando Valley
Posts: 751
|
Quote:
__________________
BackInBlack
Performance:Vararam cold air intake |
|
|
|
|
|
|
#3215 | |
|
FIVE.OH
|
Quote:
http://www.dragtimes.com/da-density-...time=8:54%20PM
__________________
2016 Mustang GT
6R80 Magnetic Metallic ![]() |
|
|
|
|
|
|
#3216 |
|
Love me some Tacos
|
|
|
|
|
|
|
#3217 |
![]() Drives: 2013 Summit White 1LE Join Date: Apr 2011
Location: Fayetteville, NC
Posts: 226
|
Received my replacement under body last night and installed it this afternoon with no issues. It fits nicely to TB with no gap. I also went to track last night and my best time was 15.08 @ 93mph. It was around 90* .
__________________
Mods: RX catch can, ZL1 Rockers, ZL1 Grill, ADM Race CAI, OBX 1 7/8 headers, tune
|
|
|
|
|
|
#3218 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 13,967
|
Ugh...brutal. We need the temps to level out a bit and hopefully get a closer to the same temp/humidity as before. In which case you should see an improvement in your time. If there is still no improvement, well then that would be the time to start questioning things.
VictoryRed, your time doesn't sound all that bad to me considering a 2011 5.0 ran a 13.9.
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!) |
|
|
|
|
|
#3219 |
![]() Drives: RS Victory Red/BS V6 Join Date: Aug 2010
Location: toronto
Posts: 384
|
Wow I just did it and it came out , if I remember the correct mph ... Too a 14.49 at 98mph... And that was defiantely not my best run of the night ... So that's about. a 5 tenths pick up from stock... Sweet
__________________
2010 Camaro 2LT RS M6 VR/BS Flowmaster AMT Axle Back Vararam Ram Air Intake P13 Plazma Bulbs DT Shorty Headers Heritage Grill Blacked-Out Taillights and Side Markers ![]() |
|
|
|
|
|
#3220 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2012 Camaro 2SS/RS Join Date: Jul 2010
Location: Cleveland, OH
Posts: 3,273
|
Did you ever run it bone stock? I believe one of the mags got around 14.2, stock. Then again, this hot & humid weather sucks for performance
__________________
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Vararam CAI Install with Color Photos | Jeanius | Camaro DIY & HOW-TO instructions & discussions | 22 | 05-26-2015 03:48 PM |
| R2C Cold Air Intake Installed!! | TXGooch21 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 15 | 12-01-2013 10:40 PM |
| Vararam installed!!! | BackinBlackSS/RS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 654 | 06-20-2012 08:35 AM |
| GMPP v6 intake | FirstCamaro2k10 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 4 | 05-18-2011 06:05 PM |