Dyno done today. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kutch720 · 09-14-2011, 09:48 PM

Finally got my baby on the dyno today. Then got my mufflers put on after. Didn't get a chance to see gains as it was getting late. Also tried the 1/4 on the dyno too. Very interesting.

BSR-1 · 09-15-2011, 09:26 PM

Quote:

Originally Posted by kutch720

Finally got my baby on the dyno today. Then got my mufflers put on after. Didn't get a chance to see gains as it was getting late. Also tried the 1/4 on the dyno too. Very interesting.

I think nobody's replied because the graph is really hard to see.
Can you get a better shot of the dyno?

Amenti · 09-15-2011, 10:51 PM

The HP and TQ numbers look kind of on the low side; but, the quarter mile time looks correct.

bmorecam · 09-15-2011, 11:42 PM

So its saying you made 230hp and 195tq which is very low, but your 1/4 run look about right with under 2.0 60ft. Let me guess..mustang or dyno dynamic dyno?

DarkneSS · 09-16-2011, 12:37 AM

If your car is auto and only has mufflers you arent running a 14.1.

SIXJAK · 09-16-2011, 01:35 AM

kutch720 · 09-16-2011, 11:01 AM

Mustang Dyno. I thought the torque was low. HP I thought was about right. I have the Auto so I figure about 25% loss. Also, this is before the exhaust so all stock. First time on a dyno for me so I did a few runs and the guy just captured 3rd gear. Thati s where I was peaking at. I am going to go back and run it again to see if the exhaust helped.

KMPrenger · 09-16-2011, 01:52 PM

Quote:

Originally Posted by DarkneSS

If your car is auto and only has mufflers you arent running a 14.1.

I can agree with that...but don't forget it CAN happen. Just need good air and a decent launch. If RTcatman600 can do a 13.7x with just an intake and exhaust in his auto, I'm sure a 14.1 could have been had at this track with an auto with just exhaust.

DJ ATOMIX · 09-18-2011, 09:13 AM

Quote:

Originally Posted by DarkneSS

If your car is auto and only has mufflers you arent running a 14.1.

Back when I was completely stock, I've done a flat 14.0 seconds on the track against an SRT4 Calibur which did 13.8 right next to me. It can be done bone stock on an auto asuming your using tap shift and shifting at 6400rpm everytime.

Shaun

KMPrenger · 09-18-2011, 07:35 PM

Quote:

Originally Posted by DJ ATOMIX

Back when I was completely stock, I've done a flat 14.0 seconds on the track against an SRT4 Calibur which did 13.8 right next to me. It can be done bone stock on an auto asuming your using tap shift and shifting at 6400rpm everytime.

Shaun

I'm not saying I don't believe you, but if you have that timeslip hanging around you should definitely post that up in the V6 1/4 mile thread! You'd be top dog in the stock category.

09-14-2011, 09:48 PM	#1
kutch720 Drives: Camaro 1LT RS Join Date: Jun 2009 Location: Maine Posts: 353 View My Garage	Dyno done today. Finally got my baby on the dyno today. Then got my mufflers put on after. Didn't get a chance to see gains as it was getting late. Also tried the 1/4 on the dyno too. Very interesting. Attached Images

09-15-2011, 10:51 PM	#3
Amenti Drives: 2017 1SS Convertible Join Date: Feb 2010 Location: San Antonio, TX Posts: 583	The HP and TQ numbers look kind of on the low side; but, the quarter mile time looks correct. __________________ Performance Mods: Injen Powerflow CAI, Doug Thorley Cat-Back Exhaust, Doug Thorley Shorty Headers, Trifecta Tune, TSW Nurburgring Wheels 20x9, 3.45 Ratio LSD Swap, VMax Black Ice-Olator Appearance Mods: RiderGraphix LS7 Front Fascia Blackout Vinyl, Gill Insert Vinyl, Rear Deck Lid Vinyl (Gloss Black), Gary's Customs Painted Bowties Coming Soon: BMR Trailing Arms

09-16-2011, 01:35 AM	#6
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	__________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVERYBODY POST YOUR DYNO NUMBERS!(sticky request)	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	365	07-20-2020 12:32 AM
Scary Dyno Experience Today	GrinderSS	Forced Induction - V8	16	10-03-2010 09:03 PM
On the Dyno today!	mcdoogle6969	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	18	08-29-2010 11:30 AM
Going to the track today (Dyno 704 rwhp)	JoeMClassic	Dragstrip and Launch Techniques Discussion	23	09-22-2009 10:24 PM
SGOS's - L99 A6 Dyno results (after dyno tune)	SGOS252382	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	48	07-27-2009 02:13 PM

09-15-2011, 11:42 PM	#4
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	So its saying you made 230hp and 195tq which is very low, but your 1/4 run look about right with under 2.0 60ft. Let me guess..mustang or dyno dynamic dyno?

09-16-2011, 12:37 AM	#5
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715	If your car is auto and only has mufflers you arent running a 14.1.

09-16-2011, 11:01 AM	#7
kutch720 Drives: Camaro 1LT RS Join Date: Jun 2009 Location: Maine Posts: 353 View My Garage	Mustang Dyno. I thought the torque was low. HP I thought was about right. I have the Auto so I figure about 25% loss. Also, this is before the exhaust so all stock. First time on a dyno for me so I did a few runs and the guy just captured 3rd gear. Thati s where I was peaking at. I am going to go back and run it again to see if the exhaust helped.