Camaro21's Journal [COTW 9/27/10] - Page 14 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro21 · 12-01-2011, 02:08 PM

These came off of SSMagna's car. They fit great on his and I hope they fit just as well on mine !!

SlowSS · 12-01-2011, 02:20 PM

That hood and trunk is going to look sick!

Camaro21 · 12-01-2011, 03:25 PM

Quote:

Originally Posted by racer778

Hey keith, looks nice. Are those the Seibon hood and trunk?? I have both on mine and the trunk does have some fitment issues. I have the first gen mold though. Let me know how it fits.

I believe you are correct !! I will try to remember to ask Chris the next time I talk to him...

http://www.seiboncarbon.com/products/chevrolet/camaro/

fcu678 · 12-01-2011, 03:39 PM

It's gonna look killer

AngelSpeedFreak · 12-01-2011, 03:45 PM

very impressive all the way around...

Kyle.Gilmour · 12-06-2011, 10:01 AM

oooooooooooooooo

Camaro21 · 12-07-2011, 05:13 PM

Santa came early this year !!

Dangeruss · 12-07-2011, 05:16 PM

Quote:

Originally Posted by Camaro21

Santa came early this year !!

MMMM....nitrous.

WadeWilson · 12-07-2011, 05:26 PM

Quote:

Originally Posted by Camaro21

Santa came early this year !!

Nitrous....

That hood and trunk lid will look great on your car Keith!

michael's maro · 12-07-2011, 05:34 PM

Keith your car is looking good....

Camaro21 · 12-07-2011, 05:46 PM

Quote:

Originally Posted by Dangeruss

MMMM....nitrous.

Quote:

Originally Posted by Shardik2SS

Nitrous....

That hood and trunk lid will look great on your car Keith!

Quote:

Originally Posted by michael's maro

Keith your car is looking good....

Thanks Guys, I can't wait until it's all done and Spring comes around so I can give it a run to see what it will do !!

Camaro21 · 12-18-2011, 06:59 PM

So after another trip back to Andy @ ADM Performance for a little more work (Nitrous, Pfadt Rear solid bushings, Hood and Deck Lid swap. Here is the dyno results.

This is with a 50 shot... It made 903 rwhp and 1007 rwtq on a 150 shot and we had to back it down...Too much power and torque for now!! I left the car with Andy to upgrade the clutch and slave cylinder once again.. The slave cylinder is coming apart...

I can't tell you how happy I am with the results... Andy keeps impressing me.. Thanks Andy and everyone at ADM Performance !!

I will post pics of the new hood and deck lid once I get the car back..

HufferSS · 12-18-2011, 08:18 PM

Is that a plate system? Are these wet or dry kits? Not familiar with nitrous setups for 5th gens....especially with a SC.

Camaro21 · 12-18-2011, 10:00 PM

Quote:

Originally Posted by HufferSS

Is that a plate system? Are these wet or dry kits? Not familiar with nitrous setups for 5th gens....especially with a SC.

It is a Dry shot system in the Air Box.. You can get either wet or dry shot. They do make plate systems for the Camaros.

12-01-2011, 03:39 PM	#186
fcu678 5Th Gen (Craig) Drives: 2014 C7 Join Date: Oct 2008 Location: Houma, Louisiana Posts: 765 View My Garage	It's gonna look killer __________________ 2014 C7

12-01-2011, 03:45 PM	#187
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	very impressive all the way around... __________________

12-06-2011, 10:01 AM	#188
Kyle.Gilmour Charter Circle Member Drives: 427 LSX- with TWINS Join Date: Jan 2007 Location: Back in Michigan!! Do miss ATX and my Tejas friends Posts: 2,745 View My Garage	oooooooooooooooo __________________

12-07-2011, 05:13 PM	#189
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	Santa came early this year !! Attached Images

12-07-2011, 05:34 PM	#192
michael's maro RAM'S CAMARO Drives: 2010 camaro ss 2015 Z-28 Join Date: Apr 2009 Location: mt. pleasant south carolina Posts: 1,025 View My Garage	Keith your car is looking good.... __________________

12-01-2011, 02:08 PM	#183
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	These came off of SSMagna's car. They fit great on his and I hope they fit just as well on mine !!

12-01-2011, 02:20 PM	#184
SlowSS Drives: 2013 Camaro 2SS/RS 1LE Join Date: Sep 2010 Location: Commerce, GA Posts: 3,873	That hood and trunk is going to look sick!

12-18-2011, 06:59 PM	#194
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	So after another trip back to Andy @ ADM Performance for a little more work (Nitrous, Pfadt Rear solid bushings, Hood and Deck Lid swap. Here is the dyno results. This is with a 50 shot... It made 903 rwhp and 1007 rwtq on a 150 shot and we had to back it down...Too much power and torque for now!! I left the car with Andy to upgrade the clutch and slave cylinder once again.. The slave cylinder is coming apart... I can't tell you how happy I am with the results... Andy keeps impressing me.. Thanks Andy and everyone at ADM Performance !! I will post pics of the new hood and deck lid once I get the car back.. Attached Images

12-18-2011, 08:18 PM	#195
HufferSS I Wanna Go Faster!! Drives: 2011 2SS Synergy Green M6 Join Date: Apr 2011 Location: SC Posts: 3,323	Is that a plate system? Are these wet or dry kits? Not familiar with nitrous setups for 5th gens....especially with a SC. __________________ Built by Vengeance Racing 9.31@154.81 mph Procharger F1-X RPM Level 7 4L80e + Coan Converter Hendrix 9" Rear Axle + 3.50 Gear ARH 2" LTs+3.5" Exhaust Fore Fuel System, Bogarts + Hoosier Slicks Pfadt Drag Pack Suspension My Build Thread \| Best Pass To Date

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Piston to Valve Clearance?	My First Camaro!	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	08-18-2009 08:26 PM