Adding a ZL1 front end to your car.

[2SSRS@Gen5diy]

Originally Posted by sene

I paid $150 to get mine painted. I've been away from my camaro, and I haven't ordered the lower support yet.

How is that Guy and does he want a lot more bumpers to paint.

[iFast]

I'm probably going to go with something like this to solve the issue of how to wire up the second set of foglights:
http://www.ebay.com/itm/SMOKE-PROJEC...item53eac19924

This way all I have to do it pop in my current drl into the zl1 fascia then wire up the second fog lights separately. The given switch sucks. I'll probably scrap that switch for a different one that I can flush mount somewhere of my choosing.
Question: How do the drl and fog lights mount into the zl1 fascia. Is there some hardware that holds in place or do they just "pop" into place??

[11 Camaro IBM]

Hey 2SSRS on my LS will I have to make a switch with the PNP your making or will all the lights just come on with the parking lights? Thanks

[2SSRS@Gen5diy]

Originally Posted by iFast

I'm probably going to go with something like this to solve the issue of how to wire up the second set of foglights:
http://www.ebay.com/itm/SMOKE-PROJEC...item53eac19924

This way all I have to do it pop in my current drl into the zl1 fascia then wire up the second fog lights separately. The given switch sucks. I'll probably scrap that switch for a different one that I can flush mount somewhere of my choosing.
Question: How do the drl and fog lights mount into the zl1 fascia. Is there some hardware that holds in place or do they just "pop" into place??

The fog pops in the DRL go to post 13 in the second illustration you need part #21 to hold them in.

Originally Posted by 11 Camaro IBM

Hey 2SSRS on my LS will I have to make a switch with the PNP your making or will all the lights just come on with the parking lights? Thanks

I will make it both ways so let me know how you want it.

[11 Camaro IBM]

Thanks 2SSRS I just like it simple so with the parking lights and what's your take on the radiator shroud do we need it?

[iFast]

Is it part number: 20957334 to hold the drl into the fascia? And where can I find that part? Can't find it online.

[sene]

Originally Posted by 2SSRS

Have you opened one up before? its all electrical in side there is no room for mechanical switch, The electrical switch sends a signal to the BCM to turn on the power, that is how it works, All the wires are the same if you have a camaro, So i need to test if at all times it sending a signal for the HID in my case and if so how to make a harness that i can make work.

I didn't even know the part number for it Just working off my imagination and simplistic mind.

What if instead of the signal going to the BCM you routed it to a relay that activates the fogs?

[sene]

Originally Posted by 2SSRS

How is that Guy and does he want a lot more bumpers to paint.

I'll let you know when I pick up my car tomorrow but from the picture he sent me he does good quality work (had him also fill the holes in my trunk lid from my stock spoiler for the high wing spoiler install).

I'm sure he wouldn't say no to more work. How many did you have in mind?

[MValdez17]

Originally Posted by 11 Camaro IBM

Thanks 2SSRS I just like it simple so with the parking lights and what's your take on the radiator shroud do we need it?

If you want the Airflow to the engine that the ZL1 offers and the brake coolers than yes, you will have to get the inner fender liners for brake coolers too.

For the Air duct its part#10, and the side baffles Left#9, Right#9. Fan Shroud is on the back side of the Radiator.

[sene]

Originally Posted by iFast

This way all I have to do it pop in my current drl into the zl1 fascia then wire up the second fog lights separately. The given switch sucks. I'll probably scrap that switch for a different one that I can flush mount somewhere of my choosing.

Let me know if you find something that actually looks like it came from the factory. I cringe when I see cheap radio shack rocker switches on nice cars.

[11 Camaro IBM]

AAC has those great looking lighted switches for their halos

[MValdez17]

Originally Posted by 11 Camaro IBM

AAC has those great looking laminated switches for their halos

http://www.automotivelightstore.com/...ingSwitch.aspx

Just what I was looking at! lol

[2SSRS@Gen5diy]

Originally Posted by sene

I didn't even know the part number for it Just working off my imagination and simplistic mind.

What if instead of the signal going to the BCM you routed it to a relay that activates the fogs?

N.P. its all new to me too, that is why i want to see if in the right place on the BCM i can add the wire and the use the non RS switch and it will work.

Originally Posted by sene

I'll let you know when I pick up my car tomorrow but from the picture he sent me he does good quality work (had him also fill the holes in my trunk lid from my stock spoiler for the high wing spoiler install).

I'm sure he wouldn't say no to more work. How many did you have in mind?

I have my bumper and hood and new fenders too, if you want send me a pm after.

Originally Posted by MValdez17

If you want the Airflow to the engine that the ZL1 offers and the brake coolers than yes, you will have to get the inner fender liners for brake coolers too.

For the Air duct its part#10, and the side baffles Left#9, Right#9. Fan Shroud is on the back side of the Radiator.

I don't think you need it this is why, The ZL1 has a intercooler and the parts are to flow air in to it, For a non intercooler car i see no need for the parts.

Originally Posted by sene

Let me know if you find something that actually looks like it came from the factory. I cringe when I see cheap radio shack rocker switches on nice cars.

If it works i will post up.

Originally Posted by 11 Camaro IBM

AAC has those great looking laminated switches for their halos

Where do you install one if you have the HUD.

[sene]

I think I'd have to see those mounted but I'm not liking the finish or the shape. It still doesn't look like "factory" enough