Adding a ZL1 front end to your car.

[jsharp]

Haha the kind that adm performance would have to come up with. The grille fills in the whole space where front of scoop is and it does not allign if u were to trim even

[MValdez17]

Originally Posted by Toyaholic

Here's a video explaining the aerodynamics:

Great Video thanks for posting it!!!!

[MValdez17]

Originally Posted by jsharp

Well that will make u want to get all the parts lol

Yep

[s1k0]

Originally Posted by LosingReality

Anyone with a V6 that did this mind posting what parts they bought and what they used from the original hardware?

These are the parts I'm ordering for my V6.

1: 22831868 Fascia11
2: 22895338 F- Bezel11
3: 22895339 F- Bezel11
4: 22894223 Fascia11
5: 20952857 Support11
6: 20952853 Absorber11
7: 22895340 Extension11
8: 22895341 Extension11
9: 11610157 NUT (10)
10: 11570637 Bolt (20)
11: 92231490 Rivet (10)
12: 22840497 F-Harnesss
13: 20957334 DRL Retainer (2)

I'm getting the rest of the lighting from Ebay I guess (adjusters, bulbs)

[Gene Culley]

Hello All,


Here is a link to our conversion pricing...http://www.camaro5.com/forums/showthread.php?t=196190. Our conversion is $1228.99 and it does not include the grille at this time since it is not out.

Some kits may be less or people may have mentioned they got the parts for under $1000. This is true, I'm sure, but not all of the actual pieces necessary, such as the lights, the GM hardware, etc. We did not skimp or otherwise cut down on the parts on the conversion. I am a very picky individual and I wanted everything to be exactly like the ZL1 front bumper. I want the GM fasteners, the GM hardware, etc. So when I do the conversion on my car it will be with this list. Our kit consists of 97 part numbers and 126 total pieces.

If you would like to cut out the lights or the GM hardware, that is fine, we have a complete conversion list, dear to us, and we will be happy to remove things off the list for you. If you want to use other lights, no problem or other hardware no problem.

Thanks,
Gene.

[jsharp]

Its starting!

[jsharp]

Gene do you have hood in stock

[11 Camaro IBM]

You reuse mostly all hardware on the v6 like 5 of the bottom bolts that hold on that rubber guard and you cut off both squares on the shrouds or else it won't fit in. You can buy the bolts at napa for 5 dollars read through the posts you'll find where the part number for that is. You also have to drill the wheel wells only the first screw will line up reuse the clip nuts on the old bumber for the new side extenstions.

[sene]

Here she is...

[sene]

Originally Posted by Gene Culley

Hello All,


Here is a link to our conversion pricing...http://www.camaro5.com/forums/showthread.php?t=196190. Our conversion is $1228.99 and it does not include the grille at this time since it is not out.

Some kits may be less or people may have mentioned they got the parts for under $1000. This is true, I'm sure, but not all of the actual pieces necessary, such as the lights, the GM hardware, etc. We did not skimp or otherwise cut down on the parts on the conversion. I am a very picky individual and I wanted everything to be exactly like the ZL1 front bumper. I want the GM fasteners, the GM hardware, etc. So when I do the conversion on my car it will be with this list. Our kit consists of 97 part numbers and 126 total pieces.

If you would like to cut out the lights or the GM hardware, that is fine, we have a complete conversion list, dear to us, and we will be happy to remove things off the list for you. If you want to use other lights, no problem or other hardware no problem.

Thanks,
Gene.

I wish I could do the same but I'm no founder of a GM parts retailer so here's EVERYTHING I've used on mine

- Facia from GM
- Lower grill from GM
- L and R fog light bezels from GM

- OEM style halogen DRL lights from ebay (I have the LS so not fogs came with it)
- GM Projector fog lights off ebay

I reused all my hardware

[LIV4MUDDIN]

Originally Posted by sene

Here she is...

VERY NICE. Wow now I know what my white SS will look like. I so can't wait for my tax refund. Been watching yall and getting very anxious.

[2SSRS@Gen5diy]

Originally Posted by sene

Here she is...

I see one thing you have to do next, get the amber turn signals out of there.

[One Sick Camaro]

sweet mines gonna be sick lol

[sene]

Originally Posted by sene

I wish I could do the same but I'm no founder of a GM parts retailer so here's EVERYTHING I've used on mine

- Facia from GM
- Lower grill from GM
- L and R fog light bezels from GM

- OEM style halogen DRL lights from ebay (I have the LS so not fogs came with it)
- GM Projector fog lights off ebay

I reused all my hardware

Just a side note, you life will be MUCH easier if you get the retainers for the DRL lights I was just to impatient to wait for them so add that onto your list.