!!!OFFICIAL!!! SoCal Head Turners thread - Page 479 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BROMARO909 · 02-08-2012, 06:01 PM

Quote:

Originally Posted by camar00t

It's because they are Hess Innovations now http://www.hessinnovations.com. All the same content is up there from before except the project cars (yours and mine included) have no pics showing since they didn't transfer/copy it over right.

That's all I know as of now and yes it is VERY odd

Where have you been bro? Where in Agoura Hills last week?

TCAT · 02-08-2012, 07:15 PM

Quote:

Originally Posted by leonardo

dude you should be a comedian, you always got some nice jokes, actually you and Tommy can be partners in a comedy tour

you got it

hes talking about the granatelli

Hahaha, thanks my homesqueeze from another taco cheese!

Chito · 02-08-2012, 07:26 PM

camar00t · 02-09-2012, 12:13 AM

I'm in Agoura Hills every week day..I have office space off Roadside Drive past Do-It Center and the RV place. It is right next to that Carpet/Tile store.

Why have you seen me driving around? I'll be at the office tomorrow from around 8am - 2:30pm.

Quote:

Originally Posted by BROMARO909

Where have you been bro? Where in Agoura Hills last week?

chrisc32 · 02-09-2012, 02:27 AM

HT5 bros do any of u guys know how to put the body kit

BROMARO909 · 02-09-2012, 03:19 AM

Quote:

Originally Posted by camar00t

I'm in Agoura Hills every week day..I have office space off Roadside Drive past Do-It Center and the RV place. It is right next to that Carpet/Tile store.

Why have you seen me driving around? I'll be at the office tomorrow from around 8am - 2:30pm.

Yea I live right down the street haha

camar00t · 02-09-2012, 10:09 AM

Lets meet up for lunch or something....let me know if you are available.

Quote:

Originally Posted by BROMARO909

Yea I live right down the street haha

ChvyBoss · 02-09-2012, 10:41 AM

Quote:

Originally Posted by chrisc32

HT5 bros do any of u guys know how to put the body kit

Na take it to your local shop homie. That's something you want done at a shop.

fiascoes1 · 02-09-2012, 10:46 AM

Quote:

Originally Posted by ChvyBoss

Na take it to your local shop homie. That's something you want done at a shop.

I agree, but if it comes down to it I can help with the side skirts!

chrisc32 · 02-10-2012, 03:25 AM

Quote:

Originally Posted by ChvyBoss

Na take it to your local shop homie. That's something you want done at a shop.

Oh orite well I gotta wait till next week

chrisc32 · 02-10-2012, 03:25 AM

Quote:

Originally Posted by ChvyBoss

Na take it to your local shop homie. That's something you want done at a shop.

Quote:

Originally Posted by fiascoes1

I agree, but if it comes down to it I can help with the side skirts!

Foreal u think u can help me when u ever have free time or just bored

TCAT · 02-10-2012, 12:05 PM

I'm at the shop right now getting the doors done. It should be about lunch time until its done. I'll tell you what though, I'm veryyyyyy uncomfortable sitting here in the waiting room not being able to see my car while some stranger is laying their hands on it. I'm starting to worry about scratches, dings, etc. They are nice, don't get me wrong, but I need to ensure my car comes out PERFECT.

909Camaro! · 02-10-2012, 12:10 PM

Quote:

Originally Posted by TCAT

I'm at the shop right now getting the doors done. It should be about lunch time until its done. I'll tell you what though, I'm veryyyyyy uncomfortable sitting here in the waiting room not being able to see my car while some stranger is laying their hands on it. I'm starting to worry about scratches, dings, etc. They are nice, don't get me wrong, but I need to ensure my car comes out PERFECT.

that sucks bro!!! why is it that you can't see while there installing? man!! make sure you check everything before you leave!!

TCAT · 02-10-2012, 01:00 PM

I'm in the waiting room a couple doors around the corner. Supposedly for insurance purposes, I need to be in the waiting room and not around the installation, but he said every now and then I can go back to see. That doesn't help though haha, because don't trust anyone alone with my car. It's not that they aren't reputable but you never know how someone treats your car when you're not around. I don't want t see anything wrong with it when I leave. It bothers me leaving it alone with anyone. Even one of their tool carts on wheel can roll into the bumper or doors, or the air tool hose can rub against the car, etc. This car means a lot to me, so it's hard to trust someone I just met with it. I'm sure it will work out, but there is always a chance it won't. We'll definitely see. I'm psyched about getting these doors, but uneasy while I sit here. Lol

02-08-2012, 07:26 PM	#6695
Chito SoCal HT5 Drives: 2010 Camaro black 2ss/rs Join Date: Jul 2010 Location: So CAL. Posts: 1,391 View My Garage	__________________

02-09-2012, 02:27 AM	#6697
chrisc32 5.0ing Drives: 5.0!!!!! Join Date: Jul 2011 Location: downey ca Posts: 329 View My Garage	HT5 bros do any of u guys know how to put the body kit __________________ 5.0 smashing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Release Thread of the ******** 2010 Camaro Plug N Play RCA T-Harness	Steve@Subthump	Audio / Visual / Electronics/ Gauges / Nav	201	06-07-2011 09:06 PM
Official Camaro SL,UT C5FESTII Thread	SSOOCH	USA - Southwest	70	04-17-2011 11:47 PM
PWA "The Lounge"	DGthe3	Off-topic Discussions	143773	11-06-2010 12:00 PM
OFFICIAL Photo Thread from the SA Photoshoot 11-22-2009	CamaroSkooter	USA - Texas	39	12-09-2009 11:45 PM
Official $5999 Ultimate Performance Single Turbo kit for sale thread.	JTinFL	Forced Induction	30	10-21-2009 07:43 PM

02-10-2012, 12:05 PM	#6704
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	I'm at the shop right now getting the doors done. It should be about lunch time until its done. I'll tell you what though, I'm veryyyyyy uncomfortable sitting here in the waiting room not being able to see my car while some stranger is laying their hands on it. I'm starting to worry about scratches, dings, etc. They are nice, don't get me wrong, but I need to ensure my car comes out PERFECT.

02-10-2012, 01:00 PM	#6706
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	I'm in the waiting room a couple doors around the corner. Supposedly for insurance purposes, I need to be in the waiting room and not around the installation, but he said every now and then I can go back to see. That doesn't help though haha, because don't trust anyone alone with my car. It's not that they aren't reputable but you never know how someone treats your car when you're not around. I don't want t see anything wrong with it when I leave. It bothers me leaving it alone with anyone. Even one of their tool carts on wheel can roll into the bumper or doors, or the air tool hose can rub against the car, etc. This car means a lot to me, so it's hard to trust someone I just met with it. I'm sure it will work out, but there is always a chance it won't. We'll definitely see. I'm psyched about getting these doors, but uneasy while I sit here. Lol