ANNOUNCMENT: JDP Motorsports is Finalizing it's Color Changing RS Halo Package!

[chozn4service]

Originally Posted by JDP Motorsports

Thank you for all of the orders and support!!! We're shipping orders that were placed the first week of February now and we're moving along.

I'm waiting on #100000396

[MackMan]

Originally Posted by chozn4service

I'm waiting on #100000396

I'm waiting on order #100000383

Ordered 2/29 maybe they'll come next week. Want to get these before I get my hood so I can put them in and get my bumper fixed so I won't have to take it off and possibly mess up my bumper again. Lol.

[Twoblindsheep]

Originally Posted by chozn4service

I'm waiting on #100000396

#100000394

[StOrM TrOOpEr]

#100000413 (placed on March 9, 2012)

[ALLTRBO]

Mine was delivered yesterday, and I watched the install video, which was very thorough. It'll take me a little while before I have a chance to install, though. Can't wait!

Thanks JDP!

[rjdapilmoto]

#100000389 (order placed on March 1)

[LS3 SS]

Im going to attempt to tackle this install as soon as the sun comes up tommorow morning. I've read some of the installs and I believe I have everything I need to make it less painful than other install stories.

[bigsquirrel]

Check your pms please

[bigsquirrel]

Has anyone had experience when there's trouble with these? I could use some help. I have to boxes now, I moved the old box ground they flash red for a second when you power them on then nothing. The new box does nothing no lights at all.

[bigsquirrel]

Made some progress, with the combination of the new remote and the old box the colour red is working no other colour though.

[dragom]

Originally Posted by bigsquirrel

Made some progress, with the combination of the new remote and the old box the colour red is working no other colour though.

Did you make sure the ground is good. When I first turned mine on I had a dim blue light but no other operation. I cleaned the paint off the bracket for the horn and I even put a new terminal lug on it just to make sure. I tightened it down after I was sure the lights stayed on. I can not stress how important the ground is for proper operation. I hope this is your problem at least it was mine. Good Luck!!

[ToddB]

I had no problems with mine. I also used a small grinder to take the paint off by the ground.

[01pewterz28]

Originally Posted by bigsquirrel

Has anyone had experience when there's trouble with these? I could use some help. I have to boxes now, I moved the old box ground they flash red for a second when you power them on then nothing. The new box does nothing no lights at all.

Welcome to the club I did the install last Saturday go to power the lights on nothing called JDP did some trouble shooting over the phone no go, JDP thinks its the control box is no good so they will send out a new one no biggie things happen I did request that they send a new wiring harness out just incase but they did not they sent just the control box.

So this morning we go to install the new box I pull off the tires, wheel liners, bumper, and bumper support we plug in everything go to fire it up nothing no lights. We notice the red wire from the power connector has come out of the wiring harness it's not making contact with the other end then we also find another wire that runs to the fuse box has come apart from the butt connector so we get that reconnected and the other wire connected still no go. Ok so now I am not real happy the good news is another guy was at the same shop having his lights done but before they took his car apart we tested his lights on the work bench cool his functions perfectly so we test his box with my already installed wiring harness no go. Now we test my 1st control box with his good wiring harness nothing, we plug in the 2nd box we get a blinking light but the LEDs will not stay on they just blink ( they blink white) like we have a bad ground yet we already tested his box and everything worked great. So we try his box yep his setup works. Well we take his wiring harness and box and plug it into my headlights and led light Bingo it works so we can confirm my LEDs work but the two control boxes and my wiring harness are bad.

So I was back on the phone with JDP informing them of the testing. Justin said he would send out a new wiring harness, and new control box next week so we shall see if the 3rd time is a charm.

Sean

[bigsquirrel]

Eh, early adopters right? There's a reason there's always a discount for a new product. I'm sure I'll get it squared away.