Plenum Spacer for your LLT - Page 12 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Grinz · 04-23-2012, 07:33 AM

Can I get PM with price to 46074 for Insulator and spacer please.

GasTires&Oil · 04-23-2012, 08:09 AM

Can I get a price on the plenum spacer and bolt kit for 3/8" spacer 35244 please.

mhog · 04-23-2012, 09:13 AM

Has any of the spacer shipped yet?

RS_Man · 04-23-2012, 10:06 AM

Can I get a price on the plenum spacer shipped to 45409

thanks!

bmorecam · 04-23-2012, 12:01 PM

I was going to get some dyno numbers for you guys this week but I just found out that the the AFR on the new tune we been testing and which is the main purpose for the dyno is running 14's right now. Last time I was on the dyno the same thing happened and I lost almost 20hp. Since the last dyno I did make a few changes which is new header, plenum cover spacer, and porting of my head(inlet only). I didnt think this would be enough to change the AFR this much but it did. Something caused my AFR to go lean. Theres no way I can go on the dyno with the AFR in the 14's. Vince is on vacation right now and wont be back until next week but he does have his tools with him so hopefully he will get back to me in time for the dyno. If not, it will get pushed back again for next week, unfortunately:(

Sent from my VTAB1008 using Tapatalk 2

JHenfling · 04-23-2012, 12:06 PM

No worries.Has anyone else received theirs yet to give their opinion on the difference it makes.

menendez1293 · 04-23-2012, 03:16 PM

Quote:

Originally Posted by bmorecam

I was going to get some dyno numbers for you guys this week but I just found out that the the AFR on the new tune we been testing and which is the main purpose for the dyno is running 14's right now. Last time I was on the dyno the same thing happened and I lost almost 20hp. Since the last dyno I did make a few changes which is new header, plenum cover spacer, and porting of my head(inlet only). I didnt think this would be enough to change the AFR this much but it did. Something caused my AFR to go lean. Theres no way I can go on the dyno with the AFR in the 14's. Vince is on vacation right now and wont be back until next week but he does have his tools with him so hopefully he will get back to me in time for the dyno. If not, it will get pushed back again for next week, unfortunately:(

Sent from my VTAB1008 using Tapatalk 2

No problem Bmorecam. Hopefully you can it soon without to much of a problem. I am curious as well to see if anybody has some input on the spacer

formare · 04-23-2012, 03:20 PM

Bmorecam - It Sounds like you won't be ale to dyno the plenum spacer as you have done other mods. Will anyone else be stepping up to dyno the the spacer?

hapisok · 04-23-2012, 04:20 PM

Quote:

Originally Posted by formare

Bmorecam - It Sounds like you won't be ale to dyno the plenum spacer as you have done other mods. Will anyone else be stepping up to dyno the the spacer?

yesh...

Ventmaster · 04-23-2012, 06:51 PM

Go Hapi- go!

bmorecam · 04-23-2012, 07:49 PM

Quote:

Originally Posted by formare

Bmorecam - It Sounds like you won't be ale to dyno the plenum spacer as you have done other mods. Will anyone else be stepping up to dyno the the spacer?

That's not an issue. plenum spacer is one of the easiest part to swap. 8 bolts and about 15 minutes is all it take, but more numbers from different peoples is always a good thing

go hapi go LOL

Sent from my LG-P500 using Tapatalk

hapisok · 04-23-2012, 09:27 PM

look at me go...:party0048:

bmorecam · 04-23-2012, 09:51 PM

look at that dude go

go aaron go LOL!

Sent from my LG-P500 using Tapatalk

camaro2lt · 04-23-2012, 10:14 PM

how does this install and can i use it with my blackice isolator? pm me price

04-23-2012, 07:33 AM	#155
Grinz Drives: Black Camaro RS Join Date: Apr 2012 Location: Indy Posts: 23	Can I get PM with price to 46074 for Insulator and spacer please. __________________

04-23-2012, 10:06 AM	#158
RS_Man Drives: '13 Sonic RS 1.4T M6 Join Date: Mar 2009 Location: Dayton, OH Posts: 283 View My Garage	Can I get a price on the plenum spacer shipped to 45409 thanks! __________________

04-23-2012, 03:20 PM	#162
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	Bmorecam - It Sounds like you won't be ale to dyno the plenum spacer as you have done other mods. Will anyone else be stepping up to dyno the the spacer? __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter.

04-23-2012, 09:27 PM	#166
hapisok crazier than a coconut Drives: 2010 2SS/RS LS3 Join Date: Jul 2010 Location: virginia Posts: 1,547	look at me go...:party0048: __________________

04-23-2012, 10:14 PM	#168
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	how does this install and can i use it with my blackice isolator? pm me price __________________ Email: rdurso1@yahoo.com

04-23-2012, 08:09 AM	#156
GasTires&Oil Drives: Cyber Grey 2LT/RS - Vortec Max Join Date: Dec 2011 Location: South Posts: 15	Can I get a price on the plenum spacer and bolt kit for 3/8" spacer 35244 please.

04-23-2012, 09:13 AM	#157
mhog Drives: 2010 V6 Camaro 2LT/RS Join Date: May 2011 Location: NC Posts: 447 View My Garage	Has any of the spacer shipped yet?

04-23-2012, 12:01 PM	#159
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	I was going to get some dyno numbers for you guys this week but I just found out that the the AFR on the new tune we been testing and which is the main purpose for the dyno is running 14's right now. Last time I was on the dyno the same thing happened and I lost almost 20hp. Since the last dyno I did make a few changes which is new header, plenum cover spacer, and porting of my head(inlet only). I didnt think this would be enough to change the AFR this much but it did. Something caused my AFR to go lean. Theres no way I can go on the dyno with the AFR in the 14's. Vince is on vacation right now and wont be back until next week but he does have his tools with him so hopefully he will get back to me in time for the dyno. If not, it will get pushed back again for next week, unfortunately:( Sent from my VTAB1008 using Tapatalk 2

04-23-2012, 12:06 PM	#160
JHenfling Drives: 2010 Chevrolet Camaro 2LT/RS Join Date: Feb 2012 Location: Kennett Mo Posts: 58	No worries.Has anyone else received theirs yet to give their opinion on the difference it makes.

04-23-2012, 06:51 PM	#164
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 3,033	Go Hapi- go!

04-23-2012, 09:51 PM	#167
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	look at that dude go go aaron go LOL! Sent from my LG-P500 using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Join TEAM LLT social group	RSokie	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	2849	02-10-2014 09:41 PM
MACE 25mm Manifold spacer/ insulator to suit LLT	MACE_ENG	V6 Bolt-Ons & Tunes	50	07-16-2012 12:39 AM
Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results	Mike Norris	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	297	03-31-2012 07:41 PM
Throttle Body Spacer on LLT	Nutbutt	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	19	11-14-2011 11:02 PM