Lighted Bowtie Wiring Help PLEASE

[FrankT]

I'm assuming that your Bowtie is wired the same as mine. I hope they at least sent a wiring diagram with yours.

[guapo]

No they. Did not. I got. Mine from AAC.

[pkauf]

Originally Posted by FrankT

Here is the wiring diagram and schematic with parts values. I'll post a pic of the transistor board when I finalize it. I'm also documenting this in my build thread here:
http://www.camaro5.com/forums/showth...=1#post6102753

So this fixes the buzzing problem? And just to make sure I haven't gotten lost, this will have the Bowtie be blue when the lights are on (license plate light) and will go RED when you hit the brakes?

Thanks!!

Paul

[FrankT]

Originally Posted by pkauf

So this fixes the buzzing problem? And just to make sure I haven't gotten lost, this will have the Bowtie be blue when the lights are on (license plate light) and will go RED when you hit the brakes?

Thanks!!

Paul

Yes. See post #12 for a link to my build thread where you can see pictures of it.

[FrankT]

There is an error on the wiring diagram. I copied AAC's initial error on their wiring diagram when I drew mine up. THIS is the correct diagram.

[FrankT]

Here is a picture of the added circuit. It is very simple, and I enclosed it in a box from Radio Shack. I used the smallest one they had. I got the PC board there too.

[pkauf]

Originally Posted by FrankT

Here is a picture of the added circuit. It is very simple, and I enclosed it in a box from Radio Shack. I used the smallest one they had. I got the PC board there too.

Nice!!!