Mcleod RXT clutch and gforce 9 inch. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JLE58 · 04-01-2013, 04:22 PM

I have a brand new in the box never even opened mcleod Rxt with steel flywheel for sale Clutch is sold. I also will be putting up a gforce 9 inch with upgraded wavetrack and 3.50 gear forsale will be out of the car this weekend. I bought it used from a member on here with low miles and have never used it just installed it. Comes complete with everything and the drive shaft is brand new from DSS for M6 transmission( other drive shaft was for th400). 4500 for the rear will take some trades in on stock diff must be 3.45 or above or even an ls3 long block etc.

Chevy69er · 04-01-2013, 07:58 PM

Quote:

Originally Posted by JLE58

I have a brand new in the box never even opened mcleod Rxt with steel flywheel for sale 1025 shipped. I also will be putting up a gforce 9 inch with upgraded wavetrack and 3.50 gear forsale will be out of the car this weekend. I bought it used from a member on here with very low miles and have never used it just installed it. Comes complete with everything and the drive shaft is brand new from DSS ( other drive shaft was for th400). 5k for the rear will take some trades in on stock diff must be 3.45 or above or even an ls3 long block etc.

You installed it and never ran it? Why you getting rid of it?

JLE58 · 04-01-2013, 08:11 PM

Long story. Paid a shop to do a bunch of work that never got finished. Haven't driven the car in over a year got other projects now just looking to put it back to stockish and look towards the c7.

AquaRSSS · 04-02-2013, 02:01 PM

Quote:

Originally Posted by JLE58

Long story. Paid a shop to do a bunch of work that never got finished. Haven't driven the car in over a year got other projects now just looking to put it back to stockish and look towards the c7.

So, is the driveshaft for an automatic car? Also, is the Wave trac the 25 spline or 31 spline count?
Axles??

JLE58 · 04-02-2013, 02:29 PM

http://www.camaro5.com/forums/showthread.php?t=217309

Here is the thread from when I bought the set up. The Wave track uses 35 spline inner stubs. The new drive shaft if for a M6. Ive gotten alot of Pm's on this so to answer this no I do not mind sending this to g force for the buyer If they want the axles and etc checked or new bearings whatever it may be. As far as the center section it can be sent to strange or whoever the buyer wants also. I will not pay for shipping on all of this.

2SS45th · 04-02-2013, 02:42 PM

You don't happen to have that th400 drive shaft do ya?

JLE58 · 04-02-2013, 02:58 PM

Quote:

Originally Posted by 2SS45th

You don't happen to have that th400 drive shaft do ya?

No sir.

JLE58 · 04-04-2013, 12:28 PM

TTT

AquaRSSS · 04-04-2013, 05:55 PM

Quote:

Originally Posted by JLE58

http://www.camaro5.com/forums/showthread.php?t=217309

Here is the thread from when I bought the set up. The Wave track uses 35 spline inner stubs. The new drive shaft if for a M6. Ive gotten alot of Pm's on this so to answer this no I do not mind sending this to g force for the buyer If they want the axles and etc checked or new bearings whatever it may be. As far as the center section it can be sent to strange or whoever the buyer wants also. I will not pay for shipping on all of this.

It's really too bad someone went through all the trouble ordering this and then putting 3.50 gears in it. Need at least 3.89's to move a heavy ass Camaro down the strip.

JLE58 · 04-04-2013, 08:26 PM

I think a 3.50 is a great gear and would have been perfect for my set up. Maybe you just don't have enough power.

POWERFREAK · 04-04-2013, 08:41 PM

Quote:

Originally Posted by JLE58

I think a 3.50 is a great gear and would have been perfect for my set up. Maybe you just don't have enough power.

Agree...depends on the car. For a L99 or boosted application, would work great.

AquaRSSS · 04-05-2013, 10:56 AM

Quote:

Originally Posted by JLE58

I think a 3.50 is a great gear and would have been perfect for my set up. Maybe you just don't have enough power.

Maybe we should all sit in on a torque multiplication class.

JLE58 · 04-05-2013, 11:56 AM

My car didn't need more gear a 625 hp and a 3.45 gear much less 1200. What it needed was a 15" wheel and a fat tire and all the help it could get to hook of course this was real life and not Internet racing.

jeremywilson18 · 04-05-2013, 01:27 PM

great package but wrong gear for me, need a 3.73 or 3.91 I think. Weighing my options right now how cost effective this is if I need to make changes to it.

04-01-2013, 04:22 PM	#1
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	Mcleod RXT clutch and gforce 9 inch. I have a brand new in the box never even opened mcleod Rxt with steel flywheel for sale Clutch is sold. I also will be putting up a gforce 9 inch with upgraded wavetrack and 3.50 gear forsale will be out of the car this weekend. I bought it used from a member on here with low miles and have never used it just installed it. Comes complete with everything and the drive shaft is brand new from DSS for M6 transmission( other drive shaft was for th400). 4500 for the rear will take some trades in on stock diff must be 3.45 or above or even an ls3 long block etc. Last edited by JLE58; 04-19-2013 at 05:56 AM.

04-02-2013, 02:42 PM	#6
2SS45th Drives: 11 Seconds or Faster Join Date: May 2012 Location: Arvada, Colorado Posts: 2,797 View My Garage	You don't happen to have that th400 drive shaft do ya? __________________ I Ain't About That Stock Life.

04-01-2013, 08:11 PM	#3
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	Long story. Paid a shop to do a bunch of work that never got finished. Haven't driven the car in over a year got other projects now just looking to put it back to stockish and look towards the c7.

04-02-2013, 02:29 PM	#5
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	http://www.camaro5.com/forums/showthread.php?t=217309 Here is the thread from when I bought the set up. The Wave track uses 35 spline inner stubs. The new drive shaft if for a M6. Ive gotten alot of Pm's on this so to answer this no I do not mind sending this to g force for the buyer If they want the axles and etc checked or new bearings whatever it may be. As far as the center section it can be sent to strange or whoever the buyer wants also. I will not pay for shipping on all of this.

04-04-2013, 12:28 PM	#8
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	TTT

04-04-2013, 08:26 PM	#10
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	I think a 3.50 is a great gear and would have been perfect for my set up. Maybe you just don't have enough power.

04-05-2013, 11:56 AM	#13
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	My car didn't need more gear a 625 hp and a 3.45 gear much less 1200. What it needed was a 15" wheel and a fat tire and all the help it could get to hook of course this was real life and not Internet racing.

04-05-2013, 01:27 PM	#14
jeremywilson18 Drives: 2011 Inferno Orange 2SS RS(LSX 454) Join Date: Dec 2011 Location: Canada Posts: 248	great package but wrong gear for me, need a 3.73 or 3.91 I think. Weighing my options right now how cost effective this is if I need to make changes to it.