True Trac or JRE mod? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Twoblindsheep · 09-25-2013, 05:51 PM

i just installed the 3.91 gears with the JRE posi mod... the only problem i have which im not sure if its suppose to happen. but when i make a turn it sounds like im loosing traction but i think that its doing is that my tires are dragging..

Supercharged SS · 09-25-2013, 05:54 PM

Quote:

Originally Posted by Twoblindsheep

i just installed the 3.91 gears with the JRE posi mod... the only problem i have which im not sure if its suppose to happen. but when i make a turn it sounds like im loosing traction but i think that its doing is that my tires are dragging..

Mine did that too at first. It will go away eventually.

2010SSRSM6 · 09-26-2013, 11:24 AM

I've been going over this same issue. Last time at the strip I had the single wheel burnouts going on. I haven't found a vendor that sells the TruTrack yet and I'm not sure what else would be needed to get the rear working right. Looking at getting either the ZL1 or 1LE rear but not sure that would fix the issues with the rear or if I would have to upgrade the axles as well.

blazzin1 · 09-26-2013, 11:29 AM

Quote:

Originally Posted by 2010SSRSM6

I've been going over this same issue. Last time at the strip I had the single wheel burnouts going on. I haven't found a vendor that sells the TruTrack yet and I'm not sure what else would be needed to get the rear working right.

If you're on a tight budget....then the JRE Posi-Mod will work just fine for you. If you can afford a little more, then the Eaton True-Trac is a great mod with a little more "stout"!!!

Here's a good vendor for the True-Trac....doubt you can find it cheaper anywhere else....

http://www.drivetrainspecialists.com...duct-6614.html

2010SSRSM6 · 09-26-2013, 11:32 AM

Quote:

Originally Posted by blazzin1

If you're on a tight budget....then the JRE Posi-Mod will work just fine for you. If you can afford a little more, then the Eaton True-Trac is a great mod with a little more "stout"!!!

Here's a good vendor for the True-Trac....doubt you can find it cheaper anywhere else....

http://www.drivetrainspecialists.com...duct-6614.html

Thanks for the info! Any known issues with the stock axles with the eaton?

blazzin1 · 09-26-2013, 11:43 AM

Quote:

Originally Posted by 2010SSRSM6

Thanks for the info! Any known issues with the stock axles with the eaton?

No...the stock axles fit just fine, that what I have in mine. The stock axles are a known weak point when coupled with sticky drag tires and hard launches....but that is regardless of the rear end components used.

IneedAZ · 09-26-2013, 01:39 PM

Plus there is a $50 mfr rebate going on for the Eaton, filled out my paper work this morning.

I paid $585 for my Eaton including shipping and before the rebate.

09-26-2013, 11:24 AM	#17
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,553 View My Garage	I've been going over this same issue. Last time at the strip I had the single wheel burnouts going on. I haven't found a vendor that sells the TruTrack yet and I'm not sure what else would be needed to get the rear working right. Looking at getting either the ZL1 or 1LE rear but not sure that would fix the issues with the rear or if I would have to upgrade the axles as well. __________________ UNDER CONSTRUCTION......again......

09-26-2013, 01:39 PM	#21
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	Plus there is a $50 mfr rebate going on for the Eaton, filled out my paper work this morning. I paid $585 for my Eaton including shipping and before the rebate. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

09-25-2013, 05:51 PM	#15
Twoblindsheep [COTW 1/6/14] Drives: 2017 1LE Join Date: Mar 2012 Location: Scott AFB/STL Posts: 2,004	i just installed the 3.91 gears with the JRE posi mod... the only problem i have which im not sure if its suppose to happen. but when i make a turn it sounds like im loosing traction but i think that its doing is that my tires are dragging..