V8 bolt on help desk! Now available!! - Page 543 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

litle88 · 11-30-2013, 08:00 PM

Quote:

Originally Posted by thahemp

3.91 in the 1LE. Aside from that... I think so.

That's what I thought!

litle88 · 11-30-2013, 08:04 PM

Quote:

Originally Posted by Neumatic

My name is Neumatic and I have a problem...

wait wrong room sorry. But I was told to drop in here

No this is the room where you can be you while we help each other NOT down talk to you and criticize. BUT we are Blunt and only get better helping each other out. Just ask grocery getter lol he was a non believer lol.

litle88 · 11-30-2013, 08:07 PM

Here are my plates.

litle88 · 11-30-2013, 08:09 PM

Quote:

Originally Posted by Neumatic

I like it, another good one iv seen is I8AFORD.

I invite anyone to key my car, im itching to get a new paintjob

I wish someone would key it! It's insured by Smith & Wesson.

litle88 · 11-30-2013, 08:10 PM

Quote:

Originally Posted by thahemp

^^ Ject is the guy I'm gonna be faster than next spring. As long as he doesn't get wheels and drag radials too. He keeps blowing all of his money on potential future problems. I might be faster than him for a year.

We all got goals!

I just want to be ready by May!

litle88 · 11-30-2013, 08:12 PM

Come January we gotta have a plan for shirts with names and logos.

TornadoSS · 11-30-2013, 08:17 PM

Quote:

Originally Posted by Ject

I can only hope.
If I'm always the fastest then I have no desire to spend $$$ and go faster. I need someone to keep upping me.

We're all gonna go broke trying to be the fastest in the club, lol! Just build a reliable fun car and forget about it.

Neumatic · 11-30-2013, 08:21 PM

Quote:

Originally Posted by litle88

No this is the room where you can be you while we help each other NOT down talk to you and criticize. BUT we are Blunt and only get better helping each other out. Just ask grocery getter lol he was a non believer lol.

I believe there is a story somewhere in there.

Neumatic · 11-30-2013, 08:28 PM

Speaking of going broke trying to go fast. I bought a supercharger and am building a TH400 this winter. Not to mention I will still need axles, roll cage and harness at a minimum. Wallet is kinda hurting right now.

TornadoSS · 11-30-2013, 08:32 PM

Quote:

Originally Posted by Neumatic

Speaking of going broke trying to go fast. I bought a supercharger and am building a TH400 this winter. Not to mention I will still need axles, roll cage and harness at a minimum. Wallet is kinda hurting right now.

Awesome! I did the centri sc a few months back. Burned up my textralia clutch on the first pass with the new setup, installed an RXT twin. Now I need a cage this winter also. It never ends!

litle88 · 11-30-2013, 08:49 PM

I just helped Bad70supreme slap one on about 7-8 pages ago and I posted vids. He has a baby baby Lunati cam with a TCI flex plate and 3600 PTC converter. He was 11.9 first hit and ended up with an 11.6 iirc. Not bad if you ask me. Whatever you do DO NOT get a poly bushing with rubber motor mount bushings. You'll get a vibration so use a rubber bushing on the Trans.

litle88 · 11-30-2013, 08:53 PM

Quote:

Originally Posted by Neumatic

Speaking of going broke trying to go fast. I bought a supercharger and am building a TH400 this winter. Not to mention I will still need axles, roll cage and harness at a minimum. Wallet is kinda hurting right now.

Quote:

Originally Posted by TornadoSS

Awesome! I did the centri sc a few months back. Burned up my textralia clutch on the first pass with the new setup, installed an RXT twin. Now I need a cage this winter also. It never ends!

No need for cages fellas, unless you have a convertible or ttops. NHRA rules were amended and you can run a 9.99!

BlaqWhole · 11-30-2013, 08:58 PM

Quote:

Originally Posted by litle88

No need for cages fellas, unless you have a convertible or ttops. NHRA rules were amended and you can run a 9.99!

That is good to know. At that point, what kind of cage is necessary? What about harnesses and stuff??

litle88 · 11-30-2013, 09:00 PM

I should of added you must be a 2008 and newer car.

11-30-2013, 08:07 PM	#7591
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	Here are my plates. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

11-30-2013, 08:12 PM	#7594
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	Come January we gotta have a plan for shirts with names and logos. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

11-30-2013, 08:49 PM	#7599
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	I just helped Bad70supreme slap one on about 7-8 pages ago and I posted vids. He has a baby baby Lunati cam with a TCI flex plate and 3600 PTC converter. He was 11.9 first hit and ended up with an 11.6 iirc. Not bad if you ask me. Whatever you do DO NOT get a poly bushing with rubber motor mount bushings. You'll get a vibration so use a rubber bushing on the Trans. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

11-30-2013, 09:00 PM	#7602
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	I should of added you must be a 2008 and newer car. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

11-30-2013, 08:28 PM	#7597
Neumatic Drives: 2010 Camaro 2SS M6 Join Date: Oct 2011 Location: Ohio Posts: 1,448 View My Garage	Speaking of going broke trying to go fast. I bought a supercharger and am building a TH400 this winter. Not to mention I will still need axles, roll cage and harness at a minimum. Wallet is kinda hurting right now.