![]() |
|
|
#43 |
|
Drives: 2013 Camaro 1SS & 2015 Camaro SS Join Date: Oct 2013
Location: Fremont, CA
Posts: 223
|
ill be at Fontana this Sunday. Anyone going?
|
|
|
|
|
|
#44 |
![]() Drives: 2011 2SS/RS Camaro Join Date: Feb 2011
Location: So Cal
Posts: 284
|
I'll be there.
__________________
2018 ZL1 A10
2011 2SS M6. CAI, ATAK, OBX LTs (JRE tune) Autoclub Dragway Best ET: 12.785 Dec 3, 2011. Autoclub Dragway Best MPH: 112.01 Jan 7, 2012 |
|
|
|
|
|
#45 |
|
"Cam Only"
|
I posted this earlier in the thread. I ran at the event last month just fine, didn't get kicked out for sound, and I was way above that.
And then there were cars waaay above my sound level too.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq |
|
|
|
|
|
#46 |
![]() Drives: 2012 Summit White ZL1 Join Date: Dec 2012
Location: San Diego
Posts: 257
|
I'll be there this Sunday... hope to see some of you guys out there
|
|
|
|
|
|
#47 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,553
|
Test and tune events and private rentals do not have the same standards as the Street Legal drag events. The sound limit was imposed for the opening night after the track was closed for "noise".
The cars that were running for the test and tune were loud enough to make mine sound stock and there were no issues.
__________________
|
|
|
|
|
|
#48 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 2SS/RS LS3 Join Date: Nov 2011
Location: Torrance
Posts: 14,564
|
I went to their first Street Legal Drags....there were several plenty loud regular drag-cars there...no problems....the only snag I saw was a few "street legal" guys who opened their cut-outs and were told don't do it again or you're out of here....
|
|
|
|
|
|
#49 |
![]() |
Where did you find that rule about the 100db level? I can not find it anywhere. I have cutouts on my exhaust I would want to have open on my runs.
__________________
My 2010 Camaro SS
COMP Cams XFI Street/Strip, Lingenfelter LS3 Heads, AHR Long tube headers + X pipe, FAST LSXR 102mm Intake manifold, LMR Cold air intake, Flowmaster 3" stainless steel exhaust, NoWeeds Exhaust cutouts, Platinum Valve spring kit, ZEX NOS system 175hp shot, Eibach Pro-Kit performance lowering springs (1" drop all around), Custom grills, bumper ports, etc.... |
|
|
|
|
|
#50 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 2SS/RS LS3 Join Date: Nov 2011
Location: Torrance
Posts: 14,564
|
Quote:
....My guess is your cut-outs would be a no-go on Street Legal days, but ok for test and tune days....not sure....I would get in touch with them and they'll let you know....Good luck.... http://www.autoclubspeedway.com/Tick...b-Dragway.aspx This link has the Street Legal Rules, and talks about the DB business..... http://www.autoclubspeedway.com/Tick...gal-Rules.aspx Last edited by 90503; 03-06-2014 at 11:03 AM. |
|
|
|
|
|
|
#51 |
![]() Drives: 2011 2SS/RS Camaro Join Date: Feb 2011
Location: So Cal
Posts: 284
|
They don't want open headers or cut-outs open. They don't enforce the sound level, but will check to make sure everything is connected. I went on both days last time (street legal and test/tune the following day). Test and tune was CRAZY loud!
Don't worry about it and just head out. I have LTs and Borla Atak. It's pretty loud and I don't have issues.
__________________
2018 ZL1 A10
2011 2SS M6. CAI, ATAK, OBX LTs (JRE tune) Autoclub Dragway Best ET: 12.785 Dec 3, 2011. Autoclub Dragway Best MPH: 112.01 Jan 7, 2012 |
|
|
|
|
|
#52 |
![]() |
Well, I am going to take a shot at it. Going to head down for a test n tune night.
Bottles are filled and the cutouts will be open. Hope to see a few people thier.
__________________
My 2010 Camaro SS
COMP Cams XFI Street/Strip, Lingenfelter LS3 Heads, AHR Long tube headers + X pipe, FAST LSXR 102mm Intake manifold, LMR Cold air intake, Flowmaster 3" stainless steel exhaust, NoWeeds Exhaust cutouts, Platinum Valve spring kit, ZEX NOS system 175hp shot, Eibach Pro-Kit performance lowering springs (1" drop all around), Custom grills, bumper ports, etc.... |
|
|
|
|
|
#53 |
![]() Drives: 2012 SS Camaro L99 Join Date: Aug 2013
Location: California
Posts: 187
|
is the test & tune limited to the 1/4 mile, or can you ''attempt'' to top out on the oval?
we might be going this weekend for the street legal drag, depends on how Saturday goes for us + waking up early & a 2 year old is like donating hours of sleep that will never be made up. haha |
|
|
|
|
|
#54 | |
|
"Cam Only"
|
Quote:
http://www.camaro5.com/forums/showthread.php?t=343484
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq |
|
|
|
|
|
|
#55 | |
![]() Drives: 2011 2SS/RS Camaro Join Date: Feb 2011
Location: So Cal
Posts: 284
|
Quote:
__________________
2018 ZL1 A10
2011 2SS M6. CAI, ATAK, OBX LTs (JRE tune) Autoclub Dragway Best ET: 12.785 Dec 3, 2011. Autoclub Dragway Best MPH: 112.01 Jan 7, 2012 |
|
|
|
|
|
|
#56 |
![]() |
April 4th sounds like a good time to head out to fontana. Any other camaro owners going?
__________________
My 2010 Camaro SS
COMP Cams XFI Street/Strip, Lingenfelter LS3 Heads, AHR Long tube headers + X pipe, FAST LSXR 102mm Intake manifold, LMR Cold air intake, Flowmaster 3" stainless steel exhaust, NoWeeds Exhaust cutouts, Platinum Valve spring kit, ZEX NOS system 175hp shot, Eibach Pro-Kit performance lowering springs (1" drop all around), Custom grills, bumper ports, etc.... |
|
|
|
![]() |
|
|