Camaro Polishing Sections - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroDreams07 · 06-04-2014, 05:23 PM

Quote:

Originally Posted by AbsoluteMayheM

Matt, you need one more photo of the back of the car

Sent from my iPad using Tapatalk HD

I was hoping people could glean that from the last pic.

The back is kind of a free for all anyway, it's a pain in the ass.

Sent from my HTC One using Tapatalk

AbsoluteMayheM · 06-04-2014, 05:25 PM

Yeah, it's there, just from the thumbnail size I did not notice it.

My bad

Sent from my iPad using Tapatalk HD

AbsoluteMayheM · 06-04-2014, 05:26 PM

This "should" be a sticky!!

Sent from my iPad using Tapatalk HD

13lstuner · 06-04-2014, 06:00 PM

Quote:

Originally Posted by CamaroDreams07

I was hoping people could glean that from the last pic.

The back is kind of a free for all anyway, it's a pain in the ass.

Sent from my HTC One using Tapatalk

I agree. I do the trunk in four horizontal sections. The trunk lid, above the license plate, and the bottom cut in half. That was one of the more annoying portions of my car.

tramtwo · 06-04-2014, 08:09 PM

Quote:

Originally Posted by oftenimitated

do any of you use a 3.5" backing plate and the 4" pads for smaller/curved and hard to reach areas? Or do most people just stick with the 5 and 5.5?

I have found that the harder to reach areas usually need less correction... I will do some spot hand work if needed...

Sent from my DROID RAZR using Tapatalk

jshaf · 06-04-2014, 08:21 PM

that is basically how I section mine off. Like minds....LOL

Dubscamaro · 06-16-2014, 11:26 AM

Hopefully this clears a lot of people's minds haha. Awesome job Matt!

06-04-2014, 05:25 PM	#16
AbsoluteMayheM LongTimeLurker Drives: 2011 SIM 2SS/RS Convertible L99 Join Date: Dec 2012 Location: Napanee, Ontario Posts: 434 View My Garage	Yeah, it's there, just from the thumbnail size I did not notice it. My bad Sent from my iPad using Tapatalk HD __________________ 2011 2SS/RS

06-04-2014, 05:26 PM	#17
AbsoluteMayheM LongTimeLurker Drives: 2011 SIM 2SS/RS Convertible L99 Join Date: Dec 2012 Location: Napanee, Ontario Posts: 434 View My Garage	This "should" be a sticky!! Sent from my iPad using Tapatalk HD __________________ 2011 2SS/RS

06-04-2014, 08:21 PM	#20
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	that is basically how I section mine off. Like minds....LOL __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

06-16-2014, 11:26 AM	#21
Dubscamaro Living Life in MPH. Drives: 15 Summit White 2SS 1LE Join Date: Dec 2013 Location: Arizona Posts: 1,114 View My Garage	Hopefully this clears a lot of people's minds haha. Awesome job Matt! __________________ Devon W.