![]() |
|
|
#1 |
![]() Drives: ZL1 Join Date: May 2012
Location: Kansas
Posts: 109
|
Motortrend Hellcat vs ZL1
http://www.motortrend.com/roadtests/...r_srt_hellcat/
It's about what you'd expect. Hellcat faster, ZL1 more well rounded. The Hellcat wins because more people look at it than the ZL1
__________________
2014 BRM ZL1 #229
Rotofab, VMax, Moroso, MGW I used to be schizophrenic, but we're okay now. |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() Drives: 2012 ZL1 Join Date: Dec 2011
Location: pittsburgh area
Posts: 1,426
|
Wow, more people looked at a lime green new model car that has just hit the streets vs. a silver Camaro that has looked the same for three years now. That's shocking!!! The Hellcat is a cool car, but is what it is. A one trick pony throwback to the late 60's Detroit muscle, not an actual performance vehicle made to do every style of motorsports as well as possible. Not that there's anything wrong with that, LOL. Fun to have one of them in the garage along side the zl1
__________________
2012 CTF ZL1-stock
2012 ZL1 (sold) JRE 75rwhp kit catless ported lsa TB 11.04 @ 128.35 on hoosier drs and skinnies @ PRP with 1100DA |
|
|
|
|
|
#3 |
![]() Drives: ZL1 Join Date: May 2012
Location: Kansas
Posts: 109
|
The Hellcat put down 635/591 and the ZL1 put down 472/482 on K&N's dyno.
__________________
2014 BRM ZL1 #229
Rotofab, VMax, Moroso, MGW I used to be schizophrenic, but we're okay now. |
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() Drives: 2013 ZL1 A6 #7860 Join Date: Apr 2014
Location: CO, USA
Posts: 1,279
|
Quote:
Wonder what type of dyno K&N uses? (might be the same dyno that says an oiled air filter will gain 25hp on a Honda civic? )
|
|
|
|
|
|
|
#5 |
![]() ![]() ![]() Drives: 2017 ZL1 Join Date: Aug 2009
Location: Maryland
Posts: 1,052
|
People say the Hell Cat won't handle but I'm sure it'll out-handle the majority of the cars on the road. I think there are far more people who would appreciate it's light to light power over it's cornering potential. From what I read, it pulled .92 G on the skidpad. Not too shabby for a 4500# car imo. Either way, I hardly see ZL1s on the road so I'm sure the hc will be just as rare.
__________________
'17 ZL1 10.99@129 stock. 4225# raceweight. Best 60'- 1.66 on factory tires. 10.48@132 E50, intake and tune. 4270 lbs
https://youtu.be/EyHtdH9XOkY https://youtu.be/Lcu41obbTf8 '13 ZL1 BRM A6. 11.591 @ 119.2 factory stock with a 1.68 60'! Best stock mph 121.8. 11.29 @ 123 RotoFab, drag radials and skinnies. 4360# raceweight. http://youtu.be/yggIA3C_kkA 2014... back to stock http://youtu.be/spQLaTWbThs 2013... stock & RotoFab |
|
|
|
|
|
#6 |
![]() Drives: ZL1 Join Date: May 2012
Location: Kansas
Posts: 109
|
The whole article is a little silly to me. In the past, they gave the victory to the ZL1 over the Shelby because, even though the Shelby was faster, the ZL1 is more well rounded. This time, they give the victory to the Hellcat because it gets more attention. Makes perfect sense.
The Hellcat is badass for sure, but I'm not jumping in line to get one.
__________________
2014 BRM ZL1 #229
Rotofab, VMax, Moroso, MGW I used to be schizophrenic, but we're okay now. |
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() Drives: GM Join Date: Sep 2010
Location: Marydel, DE
Posts: 1,321
|
[QUOTE=cam99;7906546]Wow, more people looked at a lime green new model car that has just hit the streets vs. a silver Camaro that has looked the same for three years now. That's shocking!!! The Hellcat is a cool car, but is what it is. A one trick pony throwback to the late 60's Detroit muscle, not an actual performance vehicle made to do every style of motorsports as well as possible. Not that there's anything wrong with that, LOL. Fun to have one of them in the garage along side the zl1[/QUOTE
Just wondering I see your 1/4 mile pass almost 11 flat. What kind of HP are you putting down with a ZL1 to run hellcat like times?
__________________
Roto- Fab Cai, SLP 1 3/4" headers, 3"X pipe, LM2 cat back, Comp Cam & AI Heads, SLP UP, RPM Tuned, GPI Intake, Vmax TB, ADM Air Scoop, 3.91 Gears, Gforce driveshaft, Braille 21#, Elite Catch Can, Pfadt Tie Rods, Diff Bushings and Trailing arms, Eibach spings & sways, BMR cradle bushings, Nt555r's.
|
|
|
|
|
|
#8 |
![]() ![]() Drives: 2011 Camaro 2SS/RS LS3 Join Date: Aug 2013
Location: Tampa Bay
Posts: 812
|
there is no doubt the Hellcat is bad ass. But it is more expensive and not THAT much faster than the Camaro in the 1/4 mile. We all know the ZL1 would destroy the Cat on a road course, I would love to see a comparo of these on Willow Springs. I think overall the ZL1 is just better, and pick a rally yellow instead of silver and it might just turn as many heads as the crazy green Dodge. I love the fact how they mentioned that it took yeeaars for Dodge to finally get some skin in the musclecar game. Only problem, I see, is while the Camaro and Mustang have evolved to be complete well rounded performance package, the Challenger is still just a 1/4 mile beast
__________________
2015 Silverado Z71 6.2/2011 Camaro 2SSRS LS3/2014 Cadillac ATS 2.0T
|
|
|
|
|
|
#9 | |
![]() ![]() ![]() Drives: 2017 ZL1 Join Date: Aug 2009
Location: Maryland
Posts: 1,052
|
Quote:
__________________
'17 ZL1 10.99@129 stock. 4225# raceweight. Best 60'- 1.66 on factory tires. 10.48@132 E50, intake and tune. 4270 lbs
https://youtu.be/EyHtdH9XOkY https://youtu.be/Lcu41obbTf8 '13 ZL1 BRM A6. 11.591 @ 119.2 factory stock with a 1.68 60'! Best stock mph 121.8. 11.29 @ 123 RotoFab, drag radials and skinnies. 4360# raceweight. http://youtu.be/yggIA3C_kkA 2014... back to stock http://youtu.be/spQLaTWbThs 2013... stock & RotoFab |
|
|
|
|
|
|
#10 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,634
|
Quote:
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
|
|
|
|
|
|
#11 |
![]() ![]() Drives: 2011 Camaro 2SS/RS LS3 Join Date: Aug 2013
Location: Tampa Bay
Posts: 812
|
wait you think you the Hellcat will beat the ZL1 around the likes of PIR or Willow Springs?
__________________
2015 Silverado Z71 6.2/2011 Camaro 2SSRS LS3/2014 Cadillac ATS 2.0T
|
|
|
|
|
|
#12 |
|
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Silver is the worst color for "showing off". Unless you get close enough to see the small details, a Hellcat looks like a regular Challenger. The ZL1 is way more noticeable from farther away. Horsepower is an easy fix also. Doesn't take much to get mid to high 600's rwhp out of our ZL1's.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
|
|
|
|
|
#13 |
![]() Drives: ZL1 Join Date: May 2012
Location: Kansas
Posts: 109
|
The "easy to add horsepower" argument doesn't really hold water. Yeah, it's easy to get more power out of the ZL1. It will also be easy (once they crack the tune) to get more power out of the hellcat and you're already starting with more.
__________________
2014 BRM ZL1 #229
Rotofab, VMax, Moroso, MGW I used to be schizophrenic, but we're okay now. Last edited by Gizmo; 08-22-2014 at 09:55 PM. |
|
|
|
|
|
#14 |
|
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
Why doesn't it hold water? The Hellcat is using a bigger blower with more boost. I want to see what rpm they are spinning the Hellcat blower and what it's max rpm is. I have a feeling there is more power left on the table with the ZL1 engine than the Hellcat engine.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
|
|
|
|
|
|
|
![]() |
|
|