![]() |
|
|
#155 |
![]() ![]() ![]() Drives: 1999 camaro rs Join Date: May 2008
Location: phoenix, arizona
Posts: 1,160
|
Is it true that GM will raise the roof of the camaro 11mm. I think they should its just slightly a bit to low. Like the 15 guys that went to see the camaro they said it was a little small in their. so it can use a lift but is it true? 10mm=1 inch
|
|
|
|
|
|
#156 | |
|
I used to be Dragoneye...
|
Quote:
and 10mm = 1 cm....25.4mm = an inch.
|
|
|
|
|
|
|
#157 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: X-15 Velocipede Join Date: Mar 2008
Location: SW Florida
Posts: 4,630
|
Due to my height - I researched this thoroughly. It's buried in the multitude of threads here.
First off: They raised the roof 15mm from the concept. See much more info here: http://www.camaro5.com/forums/showthread.php?t=3832 Also, just recently a 6'2" disciple said the car is roomy. Keep reading.
__________________
Go from the presence of a foolish man, when thou perceivest not in him the lips of knowledge
General Motors ASEP, A.S. Automotive Technology, Telecommunications Specialist, CISCO Network Engineer STANDARD DISCLAIMER camaro5 is furnishing this information "as is". camaro5 does not provide any warranty of the information whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the information will be error-free. |
|
|
|
|
|
#158 |
|
www.Camaro5store.com
|
It was something like 13 to 15 mm. I really can't remember now. I'd have to go back a year and see what I typed way back then. I know it was right...whatever it was. But, we are talking about a fraction of an inch....nothing really.
|
|
|
|
|
|
#159 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008
Location: Winston-Salem, NC
Posts: 1,939
|
Do we know what the largest wheel options would be? Man, the 21's and 22's really make that concept even more desirable.
__________________
5th Gen Camaros of the Carolinas
SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... |
|
|
|
|
|
#160 |
![]() Drives: 2018 GT PP1 A10 Join Date: Mar 2008
Location: NJ
Posts: 673
|
79 inches wide?!?! How is that possible when the Challenger in 75ish inches wide and looks much wider than the Camaro side-by-side?
|
|
|
|
|
|
#161 |
|
I used to be Dragoneye...
|
It's likely to have changed in the process of getting production-ready. All measurements so far are the concept's. So at best, it gives a rough estimate of what we should expect.
|
|
|
|
|
|
#162 |
|
I'm thirsty
Drives: 1 speed bike Join Date: Jun 2008
Location: Hustisford, WI
Posts: 147
|
First of all I would like to say what's up to everyone, this being my first post. Ive been on this site for a while now just enjoying all the new info on my future car but just now have become a member. All I want is around 430hp of raw CAMARO speed for 36k or less and I would be VERY happy. Ive got 30k to put down in March for my mustang destroyer.
|
|
|
|
|
|
#163 |
|
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,441
|
Welcome to the site 5thGenAnyone.
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
|
|
|
|
#164 |
![]() |
Do you know the how different it is , as far as size, to the mustang? Is it bigger, or smaller?
|
|
|
|
|
|
#165 | |
|
I used to be Dragoneye...
|
Quote:
|
|
|
|
|
|
|
#166 |
|
come to poppa
Drives: 67RS,09 Harley FLHX Join Date: Jun 2008
Location: Maryland
Posts: 1,098
|
wow those pics are awesome. Looks to me that the Camaro is a bit smaller than the Mustang
|
|
|
|
|
|
#167 |
![]() Drives: Mitsubishi Galant Join Date: May 2008
Location: Germany
Posts: 10
|
Does anyone know, whether the v6 engine offers also that typical muscle car sound as the v8 does?
__________________
Buying the camaro: 30,000 $. Driving a camaro: unaffordable. There are some things you can't buy. For all the others there is "M**ter C#rd"!
|
|
|
|
|
|
#168 |
![]() Drives: '03 Monte Carlo SS Join Date: Mar 2008
Location: VaBeach VA
Posts: 348
|
According to the test group, the V6 has a very respectable exhaust note.
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 07:10 PM |
| GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 08:33 PM |
| Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 08:05 PM |
| Camaro (concept) Press Release!! | Pencil.Fight | 5th Gen Camaro SS LS LT General Discussions | 4 | 07-21-2008 04:33 PM |