Removing Front bumper for Halo install? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Double O Nick · 08-15-2009, 09:58 AM

I just got my Orange Halos from ACC, and I am in the process of installing them. Does anyone know other than the clips on the top what holds this to the entire body? Pictures as soon as I complete the install.

King Mouse · 08-15-2009, 10:08 AM

You will have to take your inner wheel well off to access the fasteners.

Double O Nick · 08-15-2009, 10:09 AM

Awesome Thanks!

King Mouse · 08-15-2009, 11:42 AM

Good luck!

Double O Nick · 08-15-2009, 04:58 PM

How about removing the headlight lens from the assembly? I am having an extremly hard time doing this. I put t in the oven tried pulling, prying everything. Any info would be great.

CustomCarWorx · 08-17-2009, 06:40 AM

Quote:

Originally Posted by King Mouse

You will have to take your inner wheel well off to access the fasteners.

How far do you live from Pittsburgh?

King Mouse · 08-17-2009, 07:13 AM

Not far from the Grove City Outlets.

jacob678 · 09-05-2009, 02:46 AM

I ordered the factory HID/Halo lights... along with the wiring harness that has to be swapped out. How hard was it to remove the headlights? Also was it hard getting everything back together and lined back up?

CiscoBee · 09-06-2009, 08:10 AM

Quote:

Originally Posted by Double O Nick

How about removing the headlight lens from the assembly? I am having an extremly hard time doing this. I put t in the oven tried pulling, prying everything. Any info would be great.

I tried it myself and had NO luck getting the assembly apart so I had to put everything back together. I followed the instructions completely. I also bought the orange halos. Any luck on your part??

CiscoBee · 09-06-2009, 08:11 AM

Quote:

Originally Posted by jacob678

I ordered the factory HID/Halo lights... along with the wiring harness that has to be swapped out. How hard was it to remove the headlights? Also was it hard getting everything back together and lined back up?

If you dont mind me asking, what did they hot you up for the factory halos with wiring??

vdevine · 09-06-2009, 08:23 AM

There are threads on how to put in the oven to loosen etc. and videos on how to do this...

CiscoBee · 09-06-2009, 08:30 AM

Quote:

Originally Posted by vdevine

There are threads on how to put in the oven to loosen etc. and videos on how to do this...

Been there and done that. I have opened light assemblies before for HID lighting with no problem. These assemblies are not opening. Have you tried it on yours??

08-15-2009, 09:58 AM	#1
Double O Nick Drives: 2010 Camaro 2LT Join Date: Mar 2009 Location: Mentor Ohio Posts: 185	Removing Front bumper for Halo install? I just got my Orange Halos from ACC, and I am in the process of installing them. Does anyone know other than the clips on the top what holds this to the entire body? Pictures as soon as I complete the install.

09-06-2009, 08:23 AM	#11
vdevine Drives: 2010 Black SS Join Date: Jun 2009 Location: Virginia Posts: 605 View My Garage	There are threads on how to put in the oven to loosen etc. and videos on how to do this... __________________ Vince SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FOUND PETITION TO GET RID OF FRONT PLATES	The_Beast_	USA - California	90	03-29-2012 12:54 AM
SS Prototype Bumper or Original Bumper (Bumpergate has begun)	Fandango	Cosmetics and Lighting Modification Discussions	68	08-26-2010 01:06 AM
Will SS/RS have "induction" style hood and SS front bumper?	okernan6.2	Cosmetics and Lighting Modification Discussions	12	11-23-2008 01:55 AM
1SS standard equipment and options	Tran	Wiki	1	11-05-2008 02:34 PM
Who's switching the ss bumper to the rs v6 front bumper?	chevydude26	Cosmetics and Lighting Modification Discussions	113	08-24-2008 01:10 PM

08-15-2009, 10:08 AM	#2
King Mouse Drives: EXT Join Date: Nov 2008 Location: Western PA Posts: 416	You will have to take your inner wheel well off to access the fasteners.

08-15-2009, 10:09 AM	#3
Double O Nick Drives: 2010 Camaro 2LT Join Date: Mar 2009 Location: Mentor Ohio Posts: 185	Awesome Thanks!

08-15-2009, 11:42 AM	#4
King Mouse Drives: EXT Join Date: Nov 2008 Location: Western PA Posts: 416	Good luck!

08-15-2009, 04:58 PM	#5
Double O Nick Drives: 2010 Camaro 2LT Join Date: Mar 2009 Location: Mentor Ohio Posts: 185	How about removing the headlight lens from the assembly? I am having an extremly hard time doing this. I put t in the oven tried pulling, prying everything. Any info would be great.

08-17-2009, 07:13 AM	#7
King Mouse Drives: EXT Join Date: Nov 2008 Location: Western PA Posts: 416	Not far from the Grove City Outlets.

09-05-2009, 02:46 AM	#8
jacob678 Drives: 2010 Chevrolet Camaro IOM 2SS Join Date: Apr 2009 Location: Redlands, CA Posts: 11 View My Garage	I ordered the factory HID/Halo lights... along with the wiring harness that has to be swapped out. How hard was it to remove the headlights? Also was it hard getting everything back together and lined back up?