Is There A New NightOwl Halo Kit? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jgray1978 · 11-20-2014, 02:52 PM

Having been through the installation myself I can say that the video is excellent and very detailed. I'd probably opt to lay off the background music though...

Joe@NightOwlLEDs · 11-20-2014, 03:01 PM

Quote:

Originally Posted by jgray1978

Having been through the installation myself I can say that the video is excellent and very detailed. I'd probably opt to lay off the background music though...

Thanks for the feedback...we'll be working on the V2 install video shortly.

TwentyTen2SSRS · 11-20-2014, 03:01 PM

Great! I guess I just need to pull the trigger. So with V1 if I want to add grill and engine LEDS are any of that in the instal video as well? Also what components are needed to add those to the package?

Are all installation pieces needed? I see a huge section just for install parts on your website but assuming that may be needed for people adding stuff Indian the line etx

Not that I need my hand held the WHOLE way

. Comes to engine and suspension install stuff.. Easy peasy. Get me with electrical stuff.. Not so much.

Thanks!

Joe@NightOwlLEDs · 11-20-2014, 03:07 PM

Quote:

Originally Posted by TwentyTen2SSRS

Great! I guess I just need to pull the trigger. So with V1 if I want to add grill and engine LEDS are any of that in the instal video as well? Also what components are needed to add those to the package?

Are all installation pieces needed? I see a huge section just for install parts on your website but assuming that may be needed for people adding stuff Indian the line etx

Not that I need my hand held the WHOLE way

. Comes to engine and suspension install stuff.. Easy peasy. Get me with electrical stuff.. Not so much.

Thanks!

The kit is all plug and play. The grille light installation is in the video. If you want an engine light, measure the length from just below the radiator overflow tank (about the mounting location of the kit's module) and add another foot. We have the custom strips, mounting clips, and extension cables. This would make it plug and play also. All of this is in the DIY Series section

TwentyTen2SSRS · 11-20-2014, 03:14 PM

Can I shoot you an email? What's best email?

GVA 45TH 2SS · 11-20-2014, 05:48 PM

Quote:

Originally Posted by Joe@NightOwlLEDs

Now get off this board and go install your DRL Halos!

LOL OK OK when I'm not working 60-70 hrs a week.

Joe@NightOwlLEDs · 11-20-2014, 05:50 PM

Quote:

Originally Posted by GVA 45TH 2SS

LOL OK OK when I'm not working 60-70 hrs a week.

Is that all?

layzurguy · 11-20-2014, 07:36 PM

as long as the new modules still work with the old im good.

Joe@NightOwlLEDs · 11-20-2014, 07:42 PM

Quote:

Originally Posted by layzurguy

as long as the new modules still work with the old im good.

Work perfectly.

Carmikaze · 11-21-2014, 07:51 PM

When ordering the SL port pigtails to connect grill and engine bay lighting with the version1 kit, do I need the male or female ends to connect to the module? Thanks

Joe@NightOwlLEDs · 11-21-2014, 07:54 PM

Quote:

Originally Posted by Carmikaze

When ordering the SL port pigtails to connect grill and engine bay lighting with the version1 kit, do I need the male or female ends to connect to the module? Thanks

Female

Carmikaze · 11-21-2014, 08:10 PM

Thanks, one more question. I have a DRL harness that allows the DRL's to be on at night, does your harness replace that one or add in line? Ordering tonight and want to make sure I have everything I need.

Joe@NightOwlLEDs · 11-21-2014, 08:21 PM

Quote:

Originally Posted by Carmikaze

Thanks, one more question. I have a DRL harness that allows the DRL's to be on at night, does your harness replace that one or add in line? Ordering tonight and want to make sure I have everything I need.

Our DRL harness allows you to turn on the DRLs when the car is on, or off, or any brightness in between. It also lets you add them to programs (fade/strobe). You can remove your other one.

CamaroKid300 · 12-08-2014, 01:37 AM

This is the perfect gift this holiday season for yourself or a camaro enthusiast.

11-20-2014, 03:01 PM	#31
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,974 View My Garage	Great! I guess I just need to pull the trigger. So with V1 if I want to add grill and engine LEDS are any of that in the instal video as well? Also what components are needed to add those to the package? Are all installation pieces needed? I see a huge section just for install parts on your website but assuming that may be needed for people adding stuff Indian the line etx Not that I need my hand held the WHOLE way . Comes to engine and suspension install stuff.. Easy peasy. Get me with electrical stuff.. Not so much. Thanks! __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

11-20-2014, 03:14 PM	#33
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,974 View My Garage	Can I shoot you an email? What's best email? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

11-20-2014, 07:36 PM	#36
layzurguy Ride On!!!! Drives: 2012 SS Ragtop Join Date: May 2012 Location: Race City USA Posts: 605 View My Garage	as long as the new modules still work with the old im good. __________________

12-08-2014, 01:37 AM	#42
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,143 View My Garage	This is the perfect gift this holiday season for yourself or a camaro enthusiast. __________________ Stock...For Now.

11-20-2014, 02:52 PM	#29
jgray1978 Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013 Location: Claremore, Oklahoma Posts: 840 View My Garage	Having been through the installation myself I can say that the video is excellent and very detailed. I'd probably opt to lay off the background music though...

11-21-2014, 07:51 PM	#38
Carmikaze HTCC Membership Director Drives: 2013 RS Camaro Join Date: Jan 2014 Location: Cypress TX Posts: 277	When ordering the SL port pigtails to connect grill and engine bay lighting with the version1 kit, do I need the male or female ends to connect to the module? Thanks

11-21-2014, 08:10 PM	#40
Carmikaze HTCC Membership Director Drives: 2013 RS Camaro Join Date: Jan 2014 Location: Cypress TX Posts: 277	Thanks, one more question. I have a DRL harness that allows the DRL's to be on at night, does your harness replace that one or add in line? Ordering tonight and want to make sure I have everything I need.